![]() |
bonnet badge (simples question) - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12) +--- Thread: bonnet badge (simples question) (/showthread.php?tid=12005) |
bonnet badge (simples question) - MIKE-FORD - 17-03-2013 The bonnet badge needs resprayin and a silly question but do i have to unbolt it or does it simply just unclip? RE: bonnet badge (simples question) - vlj - 17-03-2013 2x 10mm bolts when you open the bonnet then pulls out RE: bonnet badge (simples question) - MIKE-FORD - 17-03-2013 thought so haha as tryed just unclipping it to be lazy but thought it was gonna snap off, so thought ill ask 1st RE: bonnet badge (simples question) - Eeyore - 18-03-2013 just the bolts behind the badge. Dont try and peel the lion and the surround off. ive done it a few times and just ruined it D: RE: bonnet badge (simples question) - gareth7 - 19-03-2013 (18-03-2013, 04:44 PM)SRowell Wrote: just the bolts behind the badge. Dont try and peel the lion and the surround off. ive done it a few times and just ruined it D: That's because you've done it wrong mate, they're easy to remove and if done right they'll go back on again good as new ![]() RE: bonnet badge (simples question) - Eeyore - 19-03-2013 (19-03-2013, 04:54 AM)gareth7 Wrote:(18-03-2013, 04:44 PM)SRowell Wrote: just the bolts behind the badge. Dont try and peel the lion and the surround off. ive done it a few times and just ruined it D: quite possibly! How are you taking them apart? I drilled out the sprews on the back of the badge D: RE: bonnet badge (simples question) - Matt - 19-03-2013 Drilled? Christ I just popped my off using a flat blade and patients RE: bonnet badge (simples question) - gareth7 - 19-03-2013 (19-03-2013, 11:39 AM)SRowell Wrote:(19-03-2013, 04:54 AM)gareth7 Wrote:(18-03-2013, 04:44 PM)SRowell Wrote: just the bolts behind the badge. Dont try and peel the lion and the surround off. ive done it a few times and just ruined it D: I just buzz the fixings lightly with a drill bit to break the bond, the tips of the fixings are only melted slightly to hold the badge on. Takes seconds to get the badge off using this method and no damage...........ever ![]() RE: bonnet badge (simples question) - Oil-burner - 19-03-2013 ^^thats how I did mine RE: bonnet badge (simples question) - Eeyore - 19-03-2013 hmmm maybe mine was particularly well stuck D: I drilled all the sprews, used a flat blade and ended up bending the outer surround and the lions arm snapped off D: RE: bonnet badge (simples question) - Oil-burner - 19-03-2013 I pushed mine out by the "sprews" with a thin screwdriver RE: bonnet badge (simples question) - gareth7 - 20-03-2013 ^ this.....if you try prising it from the front you run the risk of the lion's tail snapping off or one of it's 'arms' (although I've never seen a lion with arms lol) I'm keeping quiet about the chrome edging trim and how I remove it, don't want to give too much away ![]() RE: bonnet badge (simples question) - Rich306 - 20-03-2013 (20-03-2013, 04:22 AM)gareth7 Wrote: ^ this.....if you try prising it from the front you run the risk of the lion's tail snapping off or one of it's 'arms' (although I've never seen a lion with arms lol) Give too much away? It's not exactly a specialist money making skill. lol just spill the beans! RE: bonnet badge (simples question) - gareth7 - 20-03-2013 (20-03-2013, 08:28 AM)Rich306 Wrote:(20-03-2013, 04:22 AM)gareth7 Wrote: ^ this.....if you try prising it from the front you run the risk of the lion's tail snapping off or one of it's 'arms' (although I've never seen a lion with arms lol) Maybe not mate but I do quite well out of custom badges......let's just say it involves a concave blade stanley knife blade. RE: bonnet badge (simples question) - Rich306 - 20-03-2013 (20-03-2013, 05:19 PM)gareth7 Wrote:(20-03-2013, 08:28 AM)Rich306 Wrote:(20-03-2013, 04:22 AM)gareth7 Wrote: ^ this.....if you try prising it from the front you run the risk of the lion's tail snapping off or one of it's 'arms' (although I've never seen a lion with arms lol) Ah right, so i see ![]() |