+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Rear beam repair kits (/showthread.php?tid=11555)
Rear beam repair kits - dturbopeck - 03-03-2013
Right, I have a Hdi rear beam with slight play in os, I've put bearings in before on my dturbo, but as I only have the axle and no car details,
The question is:
Are all tubes the same size?
Is there only 1 size of inner and outer bearings?
And where do you recommend getting repair kits from?
RE: Rear beam repair kits - miles - 03-03-2013
Take the beam apart before ordering anything as it could be beyond repair, Parts can be got direct from Pug, Me or Ebay etc
Parts are all the same on 205, 306, ZX, Xsara
RE: Rear beam repair kits - Willo - 03-03-2013
Will the rear beam off any of these cars fit a 306 ?
RE: Rear beam repair kits - Scott - 03-03-2013
A Xsara beam will do, and the VTS is a very sought after rear beam as it has 21mm torsion bars (compared to the 20mm torsion bars on a GTi-6)
RE: Rear beam repair kits - RJDubya - 03-03-2013
(03-03-2013, 10:19 PM)Scott Wrote: A Xsara beam will do, and the VTS is a very sought after rear beam as it has 21mm torsion bars (compared to the 20mm torsion bars on a GTi-6)
As do the later estate beams i believe.