+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Door loom d-day (/showthread.php?tid=11053)
Door loom d-day - Willo - 18-02-2013
Well tommorow is the big day I'm doing my drivers side car to door loom swap has anyone got any tips or pointers please? Anything I should do or look out for ??
RE: Door loom d-day - Eeyore - 18-02-2013
good luck! Dont bodge it! Have a good supply of tape and or heatshrink! Soldering is the way forwards! Dont be crimping anything!
RE: Door loom d-day - Daniel306 - 18-02-2013
change the complete loom, its far easier that trying to splice it
RE: Door loom d-day - Willo - 18-02-2013
(18-02-2013, 10:40 PM)Daniel306 Wrote: change the complete loom, its far easier that trying to splice it
What you mean mate
(18-02-2013, 10:39 PM)SRowell Wrote: good luck! Dont bodge it! Have a good supply of tape and or heatshrink! Soldering is the way forwards! Dont be crimping anything!
Was gonna solder and heat shrink I got a loom 2nd hand with plenty if cable in it so just gotta join it all up
RE: Door loom d-day - jay8086 - 18-02-2013
New door loom part number is 6542.vq but its expensive from the dealers. Keep an eye out for a second hand / new old stock item. It's definitely the way forward if you got more than 2 or 3 snapped wires or if they are snapped too short to join. The part has all 23 wires so does drivers or passenger door and covers all the electrical accessories options.
RE: Door loom d-day - Willo - 19-02-2013
Gonna start this in about an hour any last Minute advice
RE: Door loom d-day - Piggy - 19-02-2013
dont burn yourself
always allow a little extra when cutting wires
do the door to chassis wiring at the same time
RE: Door loom d-day - Daniel306 - 19-02-2013
The loom runs from behind the fuse box to the osf door-osr-handbrake-nsr-nsf door. Remove the rear seats carpet and center console and it can be changed out quicker and easier than cutting and joining new plug on
RE: Door loom d-day - Willo - 19-02-2013
All sorted now swapped the loom out just got a new problem now but that's a different question