![]() |
central locking qustion. - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: central locking qustion. (/showthread.php?tid=10874) |
central locking qustion. - jpderv - 14-02-2013 hi folks well since i bought my 306 the remote centrel locking never worked and the key wouldnt turn the locks in the doors and the boot i assume for one reason or another the car got a new ignition barrel at some stage if i put down the window and push down the little snib or whatever you call it lol it locks the 2 doors and the boot so the central locking itself must be working. i want to get all the locks and ignition from another car the thing is will the remote central locking work after i swap them over if one will i be able to program the donar key with my own car? RE: central locking qustion. - jpderv - 14-02-2013 (14-02-2013, 02:25 AM)jpderv Wrote: hi folks well since i bought my 306 the remote centrel locking never worked and the key wouldnt turn the locks in the doors and the boot i assume for one reason or another the car got a new ignition barrel at some stage if i put down the window and push down the little snib or whatever you call it lol it locks the 2 doors and the boot so the central locking itself must be working. on a sde note what battery goes in the key have a load of them little batteries in the house but there all to small. RE: central locking qustion. - Face. - 14-02-2013 (14-02-2013, 10:47 AM)jpderv Wrote:(14-02-2013, 02:25 AM)jpderv Wrote: hi folks well since i bought my 306 the remote centrel locking never worked and the key wouldnt turn the locks in the doors and the boot i assume for one reason or another the car got a new ignition barrel at some stage if i put down the window and push down the little snib or whatever you call it lol it locks the 2 doors and the boot so the central locking itself must be working. inside the fob it's self it should say what battery it takes example phase 1 no alarm takes a CR2016. You can see the number just where the battery sits onto the metal bracket/holder. RE: central locking qustion. - jpderv - 14-02-2013 (14-02-2013, 01:06 PM)Face. Wrote:(14-02-2013, 10:47 AM)jpderv Wrote:(14-02-2013, 02:25 AM)jpderv Wrote: hi folks well since i bought my 306 the remote centrel locking never worked and the key wouldnt turn the locks in the doors and the boot i assume for one reason or another the car got a new ignition barrel at some stage if i put down the window and push down the little snib or whatever you call it lol it locks the 2 doors and the boot so the central locking itself must be working. thanks mate just found it cr1620 it is just have to try and find one now lol. RE: central locking qustion. - con67 - 14-02-2013 Score of quid off ebay, universal central locking kit, fitted a few for people in work far more range and no f***in about! RE: central locking qustion. - jpderv - 14-02-2013 am i right in thinkin that this is the phase 1 key? ![]() if so can this be synced with a 306 ph2 by anychance? RE: central locking qustion. - Willo - 14-02-2013 My phase 2 looks similar RE: central locking qustion. - jpderv - 14-02-2013 il try a battery in it if i can sync it with my car i wont bother changing locks ![]() RE: central locking qustion. - Face. - 15-02-2013 Think the two button one is needed for the alarm. As the little button dead lock it. I think both type keys can be synced as long as it infra red. you can see if the key is working by getting a camera and looking at the sender. Phase 2 keys have a transponder thingy in it for the immobiliser to start the car. Not sure if you can re-sync this to another car. Phase 1 keys don't as they have a key pad. |