+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Cambelt change (/showthread.php?tid=10595)
Cambelt change - Mike - 07-02-2013
Morning all (:
Just wondering how hard is it todo a cambelt on the xud with the engine still in? Going to attempt it on the weekend, but thought id ask on here for any pointers/tips before hand.
Ive seen darrens vid, an will use that as i go along.
Thanks in advance for any tips/advice!
Mike
Cambelt change - JamesG - 07-02-2013
I did one on a hdi and followed a guide on .net if you take off the top engine mount. also anything that is in the way above the cambelt covers e.g fuel pipes and the master cylinder it makes everything alot easier as you can move the engine up and down and have plenty of room albeit a little tight
James
Cambelt change - Jtrigga - 07-02-2013
Have a look on the guide section on here Darren did a very good video.