![]() |
Ideas - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7) +--- Thread: Ideas (/showthread.php?tid=10534) |
Ideas - Billyfr1 - 05-02-2013 Any ideas to add to my 306 would be appreciated RE: Ideas - Dan! - 05-02-2013 Turbocharger RE: Ideas - samass - 05-02-2013 5.7 hemi. RE: Ideas - 4WayDiablo - 05-02-2013 You could probably combine this thread into your wheels one. Less stuff to clog up the forum :-) RE: Ideas - bigcheez2k3 - 05-02-2013 2 super chargers and 2 turbos? Would be a step up from the 1 blower and 2 turbos we've already had ![]() RE: Ideas - Dum-Dum - 05-02-2013 (05-02-2013, 06:34 PM)Billyfr1 Wrote: Any ideas to add to my 306 would be appreciated Add in what way? To make it faster, to make it prettyer, to put on the roof rack to make you look like a lady garden? I think you could be a little more specific with your questions. If you look through the project section there is alot of threads to give you some ideas. RE: Ideas - darrenjlobb - 05-02-2013 6bt and a 4by conversion. RE: Ideas - Dum-Dum - 05-02-2013 ^^^ and the turbo off a Volvo FH12 or would that be copying? RE: Ideas - Jtrigga - 05-02-2013 Sweet rimz RE: Ideas - puglove - 05-02-2013 Some of them pretty flower stickers? Ideas - kentiiboii - 05-02-2013 C'mon lads don't scare him away just yet he's only 17 (down sammykins!). Save up the dough and buy a better engine. If all else fails reverse it into halfrauds and but there special modified range ![]() RE: Ideas - Pugmarshall - 05-02-2013 If it's the one in your pic (the one with Justin Bieber wearing a onesie) then it need the rear doors removing and a respray. And an XUD. /giveupandbuyadturbo RE: Ideas - Mrs puglove - 05-02-2013 (05-02-2013, 07:41 PM)darrenjlobb Wrote: 6bt and a 4by conversion. ....whats this? Female..sorry RE: Ideas - Pugmarshall - 05-02-2013 (05-02-2013, 08:30 PM)Mrs puglove Wrote:(05-02-2013, 07:41 PM)darrenjlobb Wrote: 6bt and a 4by conversion. It's basically porn. RE: Ideas - Mrs puglove - 05-02-2013 doesnt help.lol RE: Ideas - 4WayDiablo - 05-02-2013 (05-02-2013, 08:34 PM)Mrs puglove Wrote: doesnt help.lol engine porn RE: Ideas - puglove - 05-02-2013 (05-02-2013, 08:29 PM)Pugmarshall Wrote: If it's the one in your pic (the one with Justin Bieber wearing a onesie) then it need the rear doors removing and a respray. And an XUD. ![]() Harsh but fair RE: Ideas - Jtrigga - 05-02-2013 I thought he was wearing a onesie didnt want to mention it though. RE: Ideas - burnmw - 05-02-2013 Match and jerry can? On a more helpful note, check the project threads. RE: Ideas - Mrs puglove - 05-02-2013 Its all down to personal choice! Make it your own ![]() RE: Ideas - Dum-Dum - 05-02-2013 (05-02-2013, 08:30 PM)Mrs puglove Wrote:(05-02-2013, 07:41 PM)darrenjlobb Wrote: 6bt and a 4by conversion. 6bt is a cummins 6 cylinder diesel engine that is usually fuelled by a bosch pump 4by is usually a yanmar marine diesel engine, its a 4cylinder high pressure direct injection engine. Both are turbocharged. RE: Ideas - lolsteve - 06-02-2013 Faster - Strip it out, loose seats, door cards etc Sound - Universal backbox, cone filter Comfort - Sound deadening, meridan seats Looks - Splitter, spoiler (oem please) , stickers if you're into that, lows, ph3 it All standard stuff really and depends on your budget and what you want it for, low budget but comfort you want stuff like oem wheels with sound deadening - high budget no comfort is strip out interior and lows with banded steels RE: Ideas - Mrs puglove - 06-02-2013 (05-02-2013, 11:53 PM)Dum-Dum Wrote:(05-02-2013, 08:30 PM)Mrs puglove Wrote:(05-02-2013, 07:41 PM)darrenjlobb Wrote: 6bt and a 4by conversion. Thank you dum dum ![]() ![]() RE: Ideas - Matt - 06-02-2013 Find a tree and ghosty it into it for lols RE: Ideas - zx_volcane - 06-02-2013 (06-02-2013, 12:31 AM)lolsteve Wrote: Faster - Strip it out, loose seats, door cards etc Not bad suggestions really In all seriousness, if you're young then there isn't much you can do without incurring a wrath of expense, possible unwanted plod attention and silly insurance. I'd probably strip as much weight as humanly possible whilst keeping it looking and sounding oem. Then fit a decent head unit and set of components, not bothering with a sub. Then start saving for a faster 306! RE: Ideas - declantg - 06-02-2013 Start off by lowering Headlights Alloys (standard? - cyclones, challengers?) Ph3 bumpers and skirts (if not ph3) Interior; Sub and amp Half leathers, meridian are preferred. Decent HU Elec rear windows? Auto dim mirror Spray/ wrap various interior parts Turbo? Remap? Stick with standard air intake, it was designed like that for a reason. Full service Engine swap? - dturbo? Straight through exhaust Back box Uprated suspension? The world is your oyster RE: Ideas - darrenjlobb - 06-02-2013 (06-02-2013, 06:53 AM)Mrs puglove Wrote:(05-02-2013, 11:53 PM)Dum-Dum Wrote:(05-02-2013, 08:30 PM)Mrs puglove Wrote: ....whats this? 4by meaning 4 wheel drive, ![]() RE: Ideas - puglove - 06-02-2013 Next project darren? ![]() |