+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Lenso BSX 15" x 7" (BBS copy) alloys with Toyo tyres £280 (/showthread.php?tid=1031)
Lenso BSX 15" x 7" (BBS copy) alloys with Toyo tyres £280 - bearbenuk - 21-01-2012
THESE WHEELS ARE DIRECT FIT TO 306, ALL YOU NEED IS THE SPIGOT RING ADAPTORS WHICH ARE INCLUDED.
15" X 7J Lenso BSX Alloys
4x100 / 4x108 PCD (Multifits from new)
ET 20 (offset)
Toyo Proxes Tyres 195/50/15
Tyres That I Had On Fronts Are On 4-5mm And Rears Are On About 5-6mm (Plenty Of Life Left)
![[Image: 07102011375.jpg]](http://i11.photobucket.com/albums/a184/ben_h/07102011375.jpg)
![[Image: 07102011376.jpg]](http://i11.photobucket.com/albums/a184/ben_h/07102011376.jpg)
![[Image: 07102011379.jpg]](http://i11.photobucket.com/albums/a184/ben_h/07102011379.jpg)
Includes Centre Cap Removal Tool And Spigot Ring Adaptors
All Wheels have centre caps and the wheels do have lacquer peel mainly around the 'fake bolts'.
One wheel has a small bit of curbing on the lip approx 20mm in length.
These Wheels And Tyres Would Be Over £600 New
LOOKING FOR £280 Cash Collected.
I am willing to meet up and/or deliver. I am located in Ipswich, suffolk on weekends.. but work in Hartlepool in the north east during the week.
Re: Lenso BSX 15" x 7" (BBS copy) alloys with Toyo tyres £28 - Connor - 21-01-2012
2mm spacers
Re: Lenso BSX 15" x 7" (BBS copy) alloys with Toyo tyres £28 - bearbenuk - 21-01-2012
lol *it may be recommended to use some 2mm spacers but you dont have to*
Re: Lenso BSX 15" x 7" (BBS copy) alloys with Toyo tyres £28 - sweeney1987 - 21-01-2012
thats a shocking way of drilling the studs from factory :O
Re: Lenso BSX 15" x 7" (BBS copy) alloys with Toyo tyres £28 - hbomb1905 - 21-01-2012
If I had the money i'd be all over these like a tramp on chips
Billy bargain!
Re: Lenso BSX 15" x 7" (BBS copy) alloys with Toyo tyres £28 - bigcheez2k3 - 21-01-2012
sweeney1987 Wrote:thats a shocking way of drilling the studs from factory :O
Was thinking the same, they're rather close.