+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wanted: S16 Diaphragm (/showthread.php?tid=10308)
S16 Diaphragm - Frosty - 29-01-2013
As titled I'm after a S16 diaphragm for the inlet manifold. 1 for the cam belt end. Not sure if there different for each end. Maybe be interested in a pair though. Must be in working order and have the nipple to connect the pipes
RE: S16 Diaphragm - swampy - 29-01-2013
They are both the same, mountedon a metal plate that screws to the bottom, you can swap these over
If your careful it is possible to pride them open and re glue the membrane inside if that has split
RE: S16 Diaphragm - Frosty - 16-01-2014
Bump on this.
Started driving the s16 again and 1 of the diaphragms isn't work and not holding vac so is anyone able to help me out?
RE: S16 Diaphragm - cully - 17-01-2014
mr superglue to repair the diaphram
S16 Diaphragm - Frosty - 17-01-2014
Might take it off and have a look/go at sorting fixing it
RE: S16 Diaphragm - Frosty - 12-03-2014
Bump on this if anyone does have some spares as i have run out of spares
RE: S16 Diaphragm - Josh_Quant - 13-03-2014
Gti6 inlet problem solved
S16 Diaphragm - Frosty - 13-03-2014
(13-03-2014, 07:46 PM)Josh_Quant Wrote: Gti6 inlet problem solved
What's it like to fit 1 onto a S16?
RE: S16 Diaphragm - Josh_Quant - 15-03-2014
easy..
S16 Diaphragm - Frosty - 15-03-2014
Not giving touch away then? Lol
Is your 205 on the road?
RE: S16 Diaphragm - Frosty - 04-04-2014
Anyone help me? I rung peugeot and they cant get them any more
RE: S16 Diaphragm - AustinAR - 05-05-2014
Frosty, did you have much luck? the rubber on my diaphragm (cambelt side) has broken so i'm after either a new or one with a broken nipple
RE: S16 Diaphragm - Frosty - 05-05-2014
I managed to get a new 1 from Peugeot but was the last 1 they had