+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Bonnet Soundproofing (/showthread.php?tid=10059)
Bonnet Soundproofing - Ash J - 21-01-2013
Looking for a bonnet sound proofing for my Phase 1 DT.
Ideally something local (I'm in Portsmouth) unless you don't mind posting.
Cheers
Bonnet Soundproofing - kentiiboii - 21-01-2013
(21-01-2013, 10:18 PM)Ash J Wrote: Looking for a bonnet sound proofing for my Phase 1 DT.
Ideally something local (I'm in Portsmouth) unless you don't mind posting.
Cheers
I have one for the phase 2. Don't know if its same.
In Nottingham if you wanna come get it you can have it before dturbo goes.
RE: Bonnet Soundproofing - Ash J - 21-01-2013
Thanks for the offer mate, but a 360 mile round trip is too far for a bonnet sound proofing!
Not sure if a Phase 2 would fit either.
RE: Bonnet Soundproofing - Oil-burner - 21-01-2013
(21-01-2013, 11:12 PM)Ash J Wrote: Thanks for the offer mate, but a 360 mile round trip is too far for a bonnet sound proofing!
Not sure if a Phase 2 would fit either.
Just go to the scrappy mate should be plenty about!
You really need one too as its got the cold air feed to the top mount
RE: Bonnet Soundproofing - Ash J - 21-01-2013
Yeah I might take a visit to the scrappy. Do you know if a phase 2 one would fit?
And yes I only discovered that today, it's only the fact it sounds louder than my last DT that had some sound proofing, but after researching today I realise they also serve a second purpose of feeding air to the TMIC so I'll source one pretty soon!
RE: Bonnet Soundproofing - Oil-burner - 21-01-2013
(21-01-2013, 11:28 PM)Ash J Wrote: Yeah I might take a visit to the scrappy. Do you know if a phase 2 one would fit?
And yes I only discovered that today, it's only the fact it sounds louder than my last DT that had some sound proofing, but after researching today I realise they also serve a second purpose of feeding air to the TMIC so I'll source one pretty soon!
Phase 2 wont fit mate afaik you could probably make one fit but you may aswell get a proper one!
Message someone whos breaking one on ebay, theres always loads on there!
RE: Bonnet Soundproofing - Pompey306mark - 21-01-2013
Fmic it then you don't need to waste the money on sound deadening.
RE: Bonnet Soundproofing - puglove - 23-01-2013
(21-01-2013, 11:52 PM)Pompey306mark Wrote: Fmic it then you don't need to waste the money on sound deadening.
This^ i'll be taking mine off soon if your still looking then