+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Ph1 Estate. Gearbox mounted vnt (/showthread.php?tid=22302)
RE: PH1 DT estate gt2260v in progress. ...... - WiNgNuTz - 26-08-2014
I'll be using 20's all round when i fit mine, but only because i've already got 20's all round.
RE: PH1 DT estate gt2260v in progress. ...... - ash23 - 26-08-2014
so what do we think should be fun no? not much bigger that the gt2052s in there atm
(26-08-2014, 06:37 PM)WiNgNuTz Wrote: I'll be using 20's all round when i fit mine, but only because i've already got 20's all round.
20's on lasers? if so I wouldn't bother you will have to roll the arches its not worth the hassle tbh only reason I did it was because I had to lol
RE: PH1 DT estate gt2260v in progress. ...... - WiNgNuTz - 26-08-2014
Not sure how that happened, that reply was meant to be in the thread about a set of Ariannes and the spacers required to run them!
RE: PH1 DT estate gt2260v in progress. ...... - ash23 - 26-08-2014
that makes sence you had me slightly confused
RE: PH1 DT estate gt2260v in progress. ...... - Piggy - 26-08-2014
GT2260 isnt all that big. Dumdums running a GTA23. And theres a couple others running GT22s.
You just boost canning this?
RE: PH1 DT estate gt2260v in progress. ...... - zx_volcane - 26-08-2014
I had a gt2260v on mine, albeit a gen1 bmw one - didn't have a ported shroud
spooled pretty well considering the size of it, and should provide more than enough air
RE: PH1 DT estate gt2260v in progress. ...... - Chris_90 - 26-08-2014
All it needs is some shiny rods
RE: PH1 DT estate gt2260v in progress. ...... - ash23 - 27-08-2014
also recently picked a spare engine up from td_dan hopefully picking a gear box up from ted when he is back then I can start on making a exhaust manifold and a inlet mani. hopefully sorted some flanges from a forum member but if that falls through i realised I had bridgecraft engineering up the road from me
im sure ill get them sorted out.(26-08-2014, 08:07 PM)Piggy Wrote: GT2260 isnt all that big. Dumdums running a GTA23. And theres a couple others running GT22s.
You just boost canning this?
yeah its not that big really but will look well g/box mounted tho
will be boost caning 8t at first I had a quick look in to the electronic control but I just havent time to be playing with that yet.
(26-08-2014, 08:15 PM)zx_volcane Wrote: I had a gt2260v on mine, albeit a gen1 bmw one - didn't have a ported shroud
spooled pretty well considering the size of it, and should provide more than enough air
yeah hopefully should be a fun turbo I know there's one or two used these now just from different cars to this one.
(26-08-2014, 10:00 PM)Chris_90 Wrote: All it needs is some shiny rods
pfffft shiny stuff is over rated any way
but because im nice ill offer you that trade pack if cookies AND some tea bags ?
RE: PH1 DT estate gt2260v in progress. ...... - Chris_90 - 31-08-2014
Ash just been to mine took me for a spin and my god this thing moves, seriously puts your in your seat and takes off like a rocket, that dyno carnt be right feels alot more than that!
Serious sleeper right here! With that bigger turbo on will be mental not sure I'll let u take me for spin in it tho doubt my nerves will take it
RE: PH1 DT estate gt2260v in progress. ...... - ash23 - 31-08-2014
glad you like it mate
dont know what you mean about nerves 
started doing little bits befor i get the flanges to make the mani ect.
ive never had a vnt apart befor but its defo interesting stuff kinda a pain to clock tho but its nade easyer with it being new.
some not to interesting piks
[attachment=18711]
[attachment=18712]
RE: PH1 DT estate gt2260v in progress. ...... - Anton - 31-08-2014
Its a beaut of a little turbo
RE: PH1 DT estate gt2260v in progress. ...... - ash23 - 04-09-2014
(31-08-2014, 04:54 PM)Anton Wrote: Its a beaut of a little turbo
it'll do for now
RE: PH1 DT estate gt2260v in progress. ...... - Dum-Dum - 05-09-2014
Great turbo certainly. Looks pretty much how mine is mounted. Just watch out for the space needed to get the actuator and oil drain out and clear the gearbox mount.
RE: PH1 DT estate gt2260v in progress. ...... - ash23 - 05-09-2014
Hopefully the oil drain wont be a issue but it will be tight by the time ive got 4 runners and collector to the top of the gear box. hopeing to get a sub frame to make sure ill not have issues with gear links ect
RE: PH1 DT estate gt2260v in progress. ...... - ash23 - 09-09-2014
since i finished chris's pump this evening i had a spare hour or so to play. so i started mocking the mani up at first i was going to use the stock mani and just do a single relocation pipe. but i thought id make life hard and try and get 4 runners to the top of the gear box
here's tonight's efforts.... yep its not going equal length and at the end of the day its a 17year old turbo derv it wont make much difference and anything is going to flow better than the stock manifold. [attachment=18887]
[attachment=18888]
RE: PH1 DT estate gt2260v in progress. ...... - Tom - 09-09-2014
Why not log manifold? Would be way easier than runners like that...
RE: PH1 DT estate gt2260v in progress. ...... - Piggy - 09-09-2014
Fair play for the effort...a well made log manifold will do more than what you need mind. and take 1/4 of the time...and be possibly more dependable in the long run.
that turbo looks bigger than a 2260! lol
RE: PH1 DT estate gt2260v in progress. ...... - ash23 - 09-09-2014
yep it would have been easy to do that but weres the challenge in doing that? id have just done the usual stock mani + bit of pipe if i was wanting to make things easy
RE: PH1 DT estate gt2260v in progress. ...... - zx_volcane - 09-09-2014
good work ash, keep at it, be great to see a proper manifold on the go
RE: PH1 DT estate gt2260v in progress. ...... - bashbarnard - 09-09-2014
Over engineered.... stupid waste of time and resources....... many hours wasted.....
I love it and want one!!!
RE: PH1 DT estate gt2260v in progress. ...... - ash23 - 10-09-2014
(09-09-2014, 08:10 PM)zx_volcane Wrote: good work ash, keep at it, be great to see a proper manifold on the go
cheers mate. i just wamted to do something different to the normal things
(09-09-2014, 08:12 PM)bashbarnard Wrote: Over engineered.... stupid waste of time and resources....... many hours wasted.....
I love it and want one!!!
over engineered..... yes probably is for what im using it for
stupid waste of time and resources.... how so? i dont get how its a waste of time?
many hours wasted.. again how/why is it?
I love it and want one!!.... thats another reason i have gone this route who doesn't love nice shiny stuff :p
RE: PH1 DT estate gt2260v in progress. ...... - Chris_90 - 10-09-2014
Looks Awsome!
I could do with one
RE: PH1 DT estate gt2260v in progress. ...... - ash23 - 10-09-2014
when this ones done it will be so easy just to knock another one up
but i think you need a turbo worthy enough first p.s chris that inlet is the start of the one im doing for you
RE: PH1 DT estate gt2260v in progress. ...... - Chris_90 - 10-09-2014
(10-09-2014, 08:29 AM)ash23 Wrote: when this ones done it will be so easy just to knock another one up
p.s chris that inlet is the start of the one im doing for you
Ha ha I'll see how scary yours is first before I look at bigger turbos
And Awsome thanks
RE: PH1 DT estate gt22 + tubular manifold in progress. ...... - ash23 - 10-09-2014
[/quote]
Ha ha I'll see how scary yours is first before I look at bigger turbos
And Awsome thanks
[/quote]
pffffffffft just get one fitted haha or g/box mount a baby gt20
RE: PH1 DT estate gt22 + tubular manifold in progress. ...... - padge - 10-09-2014
good job ash, as always
RE: PH1 DT estate gt22 + tubular manifold in progress. ...... - ash23 - 11-09-2014
Cheers mate bout time you had another DT ?
RE: PH1 DT estate gt22 + tubular manifold in progress. ...... - Danny Wideboy - 11-09-2014
Nice project dude.
I need another XUD project back in my life.
RE: PH1 DT estate gt22 + tubular manifold in progress. ...... - padge - 11-09-2014
you never know what the future brings!
RE: PH1 DT estate gt22 + tubular manifold in progress. ...... - ash23 - 12-09-2014
(11-09-2014, 05:42 PM)Danny Wideboy Wrote: Nice project dude.
I need another XUD project back in my life.
thanks chap. they are good cheap fun
(11-09-2014, 06:28 PM)padge Wrote: you never know what the future brings!
haha you cant stay away for long lol