![]() |
Joey the VNT boosted 205! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Other Marques (https://www.306oc.co.uk/forum/forumdisplay.php?fid=38) +--- Forum: Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=39) +--- Thread: Joey the VNT boosted 205! (/showthread.php?tid=17208) |
RE: Joey the boosted 205 racer! - Tom - 19-10-2013 I imagine the springs wear so the break pressures change over time, not to mention the nozzles have a hard life. And the bosch conversion came from one car that done how ever many miles then into this one to do however many miles, bet they've done over 200k! Im on a td04 Padge. Cant go much bigger unless i go modern/vnt. Which i really want to do but im going to need headstuds before i even consider that option! RE: Joey the boosted 205 racer! - Frosty - 19-10-2013 (19-10-2013, 12:02 PM)Tom Wrote: So what next? Come to the south west meet on the 10th ![]() RE: Joey the boosted 205 racer! - Tom - 20-10-2013 Couple more pics i have taken lately. ![]() ![]() RE: Joey the boosted 205 racer! - Paul_13 - 20-10-2013 Shouldn't of sold it Max ![]() RE: Joey the boosted 205 racer! - Tom - 28-10-2013 Well this morning i was greeted with this lovely soaking footwell -.- ![]() And on the way to work the charge temps kept pretty low which was nice! ![]() And future plans are 11mm pump and 10mm fuel lines from the tank to the pump! Edit: And also if your throttle cable is stiff and your cheap like me, soak it in a bucket of oil for the day then put it back on, silky smooth now! RE: Joey the boosted 205 racer! - mr_fish - 28-10-2013 so many cars popping up with damp foot wells recently...looking forward to seeing this again. Last time was FCS 2012. Joey the boosted 205 racer! - devils_fuel - 28-10-2013 Or soak the cable in a Teflon spray like GT85 etc..works for me ![]() RE: Joey the boosted 205 racer! - procta - 28-10-2013 (28-10-2013, 03:31 PM)Tom Wrote: Well this morning i was greeted with this lovely soaking footwell -.- I bet you have the same problem that my metro had, that's the door seal either been clogged or design fail. mine was a design fail, leading the water into the car, so I knifed the holes on the outer side so the water goes out not in. RE: Joey the boosted 205 racer! - Tom - 30-10-2013 ![]() Daamnn! 64litres for 24quid! RE: Joey the boosted 205 racer! - Piggy - 30-10-2013 loving the fmic setup. defo now needs bigger blower RE: Joey the boosted 205 racer! - Tom - 30-10-2013 Bigger again? O: Joey the boosted 205 racer! - devils_fuel - 31-10-2013 (30-10-2013, 08:26 PM)Tom Wrote: Where?? RE: Joey the boosted 205 racer! - Tom - 31-10-2013 My local spar shop! All out of date today! Going back once i get some more cash to see how much i can get. If its out of date they cant sell it so have to get rid of it somehow ![]() Joey the boosted 205 racer! - devils_fuel - 31-10-2013 Lucky boy ![]() RE: Joey the boosted 205 racer! - Tom - 01-11-2013 Update: Exhaust has fallen off. Bugger. RE: Joey the boosted 205 racer! - me-tm - 01-11-2013 (01-11-2013, 02:54 AM)Tom Wrote: Update: EFT. RE: Joey the boosted 205 racer! - silverzx - 01-11-2013 (01-11-2013, 02:54 AM)Tom Wrote: Update: They're not very fume proof as I found out when I took my exhaust off for lol's, get a gas mask ASAP! RE: Joey the boosted 205 racer! - mr_fish - 01-11-2013 as said, exhausts are such a restriction. prepare for some serious bark from that blower! RE: Joey the boosted 205 racer! - kernow_joe - 01-11-2013 you mean you de-restricted your turbo ![]() after changing my old dturbo engine I tested it without an exhaust, was epic noise!! RE: Joey the boosted 205 racer! - ChezHdi - 01-11-2013 always had a massive love for 205's.. this is epic mate ![]() RE: Joey the boosted 205 racer! - Tom - 01-11-2013 I driven it round for weeks with no exhaust and i soon got bored of it. And this isnt epic its scraping along the floor and i cant tie it up so im in a bit of a pickle now! RE: Joey the boosted 205 racer! - silverzx - 02-11-2013 Why can't it be tied up? RE: Joey the boosted 205 racer! - Tom - 02-11-2013 Got nothing to tie it to :/ Joey the boosted 205 racer! - devils_fuel - 02-11-2013 Liquid metal works wonders, from what I hear ![]() RE: Joey the boosted 205 racer! - nickroo - 02-11-2013 Nice thread! RE: Joey the boosted 205 racer! - Tom - 02-11-2013 (02-11-2013, 06:35 PM)nickroo Wrote: Nice thread! Thanks man! RE: Joey the boosted 205 racer! - Tom - 03-11-2013 Just finished welding my exhaust back together. And after looking at it, making up a new one should be my top priority, less ones a mish mash of pipes and good welds and shit welds and all sorts. It fits great but tbh its f*cked. My down pipe is already 2.5" so im going to get some other bends and straight in 2.5 and make a full system. RE: Joey the boosted 205 racer! - Tom - 04-11-2013 Exhaust fell off again. fuckit. RE: Joey the boosted 205 racer! - kernow_joe - 04-11-2013 (04-11-2013, 08:37 AM)Tom Wrote: Exhaust fell off again. fuckit. sounds like you did a god fix ![]() RE: Joey the boosted 205 racer! - Tom - 04-11-2013 (04-11-2013, 10:15 AM)kernow_joe Wrote:(04-11-2013, 08:37 AM)Tom Wrote: Exhaust fell off again. fuckit. The guy who normally welds for me is teaching his son to weld. So his kid done it, to be fair to him i think the metals got some kind of coating on it because the original welds had no penetration and neither did these. But o well he'll be welding up my new exhaust for free i think. And not his kid lol |