oil-burner's bitchin HDi project - soon to be stage 2! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: oil-burner's bitchin HDi project - soon to be stage 2! (/showthread.php?tid=2193) |
RE: oil-burner's moonstone HDi project - Oil-burner - 14-01-2013 (14-01-2013, 10:35 AM)samass Wrote: Exactly man. Then you just the arse of getting the old bushes out lol Ive got access to a press so its no biggie! Been talking to scott about baker bms tho so not sure what im doing yet. Wish this snow would feck off so I can go the the scrap yard to get some boost pipes! RE: oil-burner's moonstone HDi project - samass - 14-01-2013 Ah win! Yeah, I need to find a time when I'm not busy to do exactly the same thing! RE: oil-burner's moonstone HDi project - Oil-burner - 14-01-2013 (14-01-2013, 12:57 PM)samass Wrote: Ah win! Yeah, I need to find a time when I'm not busy to do exactly the same thing! Come on then whats happening with your motor? Last I heard you had just bought the shell and was sorting the bodywork out? With all this talk of boost etc im gonna say your boosting a perv of some sort, dont think you've gone diesel although it is the better fuel! You got a cooler yet then? RE: oil-burner's moonstone HDi project - samass - 14-01-2013 nah, binning the 306, can't afford it atm, got another project on the go tho, I'll start a thread at somepoint, mostly ninja till now, but seeing as it's mostly taking shape, I'll share it with everyone but yeah, you're half right RE: oil-burner's moonstone HDi project - Just Sean - 14-01-2013 (14-01-2013, 01:48 AM)samass Wrote: Powerflex lower engine mounts are win! Had one on Irene, very solid, with little vibration on idle. Oh really... i havnt heard anything to reply too! RE: oil-burner's moonstone HDi project - samass - 14-01-2013 ffs lol, check the for sale thread! RE: oil-burner's moonstone HDi project - Oil-burner - 14-01-2013 Hmmm well ive not really been on for a couple of weeks with xmas and shizzle, well I have, just not as much as usual. So its not a 306? You fecking around with the ovlov or is it a completely new project? RE: oil-burner's moonstone HDi project - samass - 14-01-2013 nah, still french tho! volvo is still being sold (wanna buy it? ) all shall be revealed soon.... RE: oil-burner's moonstone HDi project - Oil-burner - 14-01-2013 I dont like these games, I cant rest till I guess!! Boosted 106/saxo? Dropping a big blown xud in the nasp? Please tell me its not a renault unless its something uber cool like a 19 or a gt5 RE: oil-burner's moonstone HDi project - samass - 14-01-2013 whatsapped RE: oil-burner's moonstone HDi project - Oil-burner - 14-01-2013 (14-01-2013, 02:54 PM)samass Wrote: whatsapped Hold on im gonna have to download it again Edit: you have pm RE: oil-burner's moonstone HDi project - Oil-burner - 14-01-2013 Just been to pick up my cooler! RE: oil-burner's moonstone HDi project - Arron - 14-01-2013 Should be loads easier with the twin pass. Looks huge too whats the inlet outlet size on it? No worries give us a shout I might even nip down to lend an hand RE: oil-burner's moonstone HDi project - Oil-burner - 14-01-2013 (14-01-2013, 07:59 PM)Arron Wrote: Should be loads easier with the twin pass. Looks huge too whats the inlet outlet size on it? Yeah I was holding out for one, couldnt really afford it but couldnt turn it down at £25! Inlet/outlet 63mm 2.5" Dimentions Hight 180mm Width 620mm Depth 67mm Core size 445mm x 180mm x 67mm Cheers bud, think im gonna need all the help I can get tbh. (14-01-2013, 07:59 PM)Arron Wrote: Should be loads easier with the twin pass. Looks huge too whats the inlet outlet size on it? Yeah I was holding out for one, couldnt really afford it but couldnt turn it down at £25! Inlet/outlet 63mm 2.5" Dimentions Hight 180mm Width 620mm Depth 67mm Core size 445mm x 180mm x 67mm Cheers bud, think im gonna need all the help I can get tbh. oil-burner's moonstone HDi project - kentiiboii - 14-01-2013 If you want a hand don't look at me I'm useless. But I'm always up for a day out! RE: oil-burner's moonstone HDi project - Oil-burner - 15-01-2013 (14-01-2013, 11:16 PM)kentiiboii Wrote: If you want a hand don't look at me I'm useless. But I'm always up for a day out! Haha fair enough mate, you can pass me tools if you like! Lol Gonna need as much help as I can get I think! Need to find a 406 inlet elbow and c5 pipe as cheap as poss if anyone knows of one? Messaged a bloke on ebay and he wanted 45+post for the elbow! Feck that! RE: oil-burner's moonstone HDi project - Chris_90 - 15-01-2013 (15-01-2013, 11:38 AM)Oil-burner Wrote:(14-01-2013, 11:16 PM)kentiiboii Wrote: If you want a hand don't look at me I'm useless. But I'm always up for a day out! I got mine from viaduct scrappy for £10 for elbow top pipe and the bottom hard plastic pipe. Not sure if he would still sell them for that price agin tho RE: oil-burner's moonstone HDi project - Oil-burner - 15-01-2013 (15-01-2013, 12:10 PM)Chris_90 Wrote:(15-01-2013, 11:38 AM)Oil-burner Wrote:(14-01-2013, 11:16 PM)kentiiboii Wrote: If you want a hand don't look at me I'm useless. But I'm always up for a day out! Shit hot dude ta! RE: oil-burner's moonstone HDi project - Arron - 15-01-2013 You'll need a few reducers 2.5 > 2.25 reducers, I'm sure the elbow is 2.25 but i can't remember the c5 pipe. Are you going for OEM piping? You might need to grind the slam panel a little bit too. All good fun RE: oil-burner's moonstone HDi project - Just Sean - 15-01-2013 I thought the elbow was 2.5 but I might b wrong! I'll let you no 2moro. You will need to cut the slam panel, makes its bit easier if anything!! The c5 pipe goes from 38mm to 54mm so you need a 38-38 90° for turbo to c5. I used a 41mm bend cos the turbo was slightly bigger being a ko4. RE: oil-burner's moonstone HDi project - Arron - 15-01-2013 Really? The bit of pipe that usually comes on the elbow, im running some 2.25 piping into that. Also I used a 41mm to 45mm 90 degree legged bend off the Turbo onto c5. RE: oil-burner's moonstone HDi project - Just Sean - 15-01-2013 Suppose everyone does it different!! RE: oil-burner's moonstone HDi project - Oil-burner - 15-01-2013 (15-01-2013, 07:16 PM)Arron Wrote: You'll need a few reducers 2.5 > 2.25 reducers, I'm sure the elbow is 2.25 but i can't remember the c5 pipe. Hmmm im tempted just to reduce both pipes at the cooler and work with 2.25 but it depends what I can get on the cheap! Yeah mate im hoping to as much as possible, wanting it full on stealth, painting cooler black at the weekend. But as I say just depends what I can get on the cheap, want to get the whole lot done for under a ton. (15-01-2013, 07:23 PM)Just Sean Wrote: I thought the elbow was 2.5 but I might b wrong! I'll let you no 2moro. You will need to cut the slam panel, makes its bit easier if anything!! Doesnt matter about the elbow cos im gonna use the c5/406 top pipe too. If we could confirm measurements on the c5 pipe tho it would be epic! Yeah kinda knew id end up cutting it tbh no biggie Has anyone tried using the slimline fan from the c5? (15-01-2013, 07:47 PM)Arron Wrote: Really? The bit of pipe that usually comes on the elbow, im running some 2.25 piping into that. So do we have any idea on the c5 to turbo reducer I need? RE: oil-burner's moonstone HDi project - puglove - 15-01-2013 Where did you get that cooler from??? That look right about the size i want for my 6, Is it one of those ebay jobbys? just checked and its the same dimensions, RE: oil-burner's moonstone HDi project - Oil-burner - 15-01-2013 (15-01-2013, 08:39 PM)puglove Wrote: Where did you get that cooler from??? That look right about the size i want for my 6, Apparently its a custom one his mate had done at a rad place in rotherham. Looks pretty well put together tbh. Edit: only read half of that post, got it off a lad on facebook for £25 RE: oil-burner's moonstone HDi project - Just Sean - 15-01-2013 C5 runs from 38-54mm RE: oil-burner's moonstone HDi project - Oil-burner - 15-01-2013 (15-01-2013, 08:56 PM)Just Sean Wrote: C5 runs from 38-54mm And the turbo is the same? Not even sure which turbo I have tbh presume its the gt15. RE: oil-burner's moonstone HDi project - Just Sean - 15-01-2013 I couldn't say on Ur turbo. But its probably 38mm but ud manage to squeeze at least a 35mm hose over it with some lube! RE: oil-burner's moonstone HDi project - Oil-burner - 15-01-2013 (15-01-2013, 09:21 PM)Just Sean Wrote: I couldn't say on Ur turbo. But its probably 38mm but ud manage to squeeze at least a 35mm hose over it with some lube! Hmm ill get it on one way or another! So I need 406 inlet elbow C5 bottom pipe 406 top pipe 38mm silicone 90° bend Reducer from 57mm to 63mm (onto other end of c5 pipe) 2x 2.5mm 90° bends for round the rad Then bodge from there? RE: oil-burner's moonstone HDi project - Just Sean - 15-01-2013 Why a 57-63 reducer? I used 180° metal bends. IMO the more metal you can use the better as less chance of leaks with lots of silicone/joins. One day I'll get mine all made from metal and welded up |