+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: JIMBOS ph3 xud Rolling road results (/showthread.php?tid=19452)
RE: Jimbos Gt17 ph3 Xud - padge - 22-03-2014
Mine needs more fuel, its turned down loads lol, just need to get head all done this week
lookinggood dude.
RE: Jimbos Gt17 ph3 Xud - Jimbo - 22-03-2014
Yeah defo need fuel to wake them up a bit, first drive mine was so dissapointed. Now I love it.
Cheers padge.
Might have to do my HG yet, will get a spare head skimmed up and possibly.some arp studs
RE: Jimbos Gt17 ph3 Xud - Poodle - 22-03-2014
(22-03-2014, 03:32 PM)Jimbo Wrote: Yeah fuelling it fair on a 9mm pump, without a rev counter :/
Im gonna say 2200/2500 rpm so its not 'laggy' as such it is.off a petrol though so has a larger hotside which helps it keep pulling round if.u know what I mean.
Im pretty impressed and id estimate 150/60 bhp so around stage 2 hdi power.
Haha fair, ok cool, cheers. Just interested as i've got a 1749 off a DCi and thinking it might be a bit small on the hotside... Sod it, suck it and see eh!
RE: Jimbos Gt17 ph3 Xud - Jimbo - 22-03-2014
She will certainly spool up well id imagine, run out of puff early though. Good in a compound setup though
RE: JIMBOS ph3 moonstone Hdi to Xud project - Jimbo - 21-04-2014
So this old beast is still going ok a few thousand miles later. However have a few issues that really need sorting so hopefully some time over next.couple weeks will remove engine again.
Oil leak (think from high pressure turbo feed)
Headgasket/head lift issues (only when fuel/boost is up high
Rev counter (gonna change flywheel) have.checked everything else
Fit arp headstuds
Sort slight exhaust leak on turbo somehwere
Then it's mot time so get a new windscreen and fit my home refurbed axle
Fully stripped greased rebuilt with all new seals etc. Gti bars and arb
![[Image: DSC_0287.jpg]](http://s679.photobucket.com/user/jim-bob1991/media/DSC_0287.jpg.html)
Also have tinted the top half of my rear lights slightly
Opinions welcome on these but.i think they look ok
![[Image: DSC_0289.jpg]](http://s679.photobucket.com/user/jim-bob1991/media/DSC_0289.jpg.html)
RE: JIMBOS ph3 moonstone Hdi to Xud project - Frosty - 21-04-2014
Look out jimbo got an update. Lights look pretty good and the axle looks very nice.
I did even get to have a drive in this the other day when jimbo was over and it does pull well tbf
RE: JIMBOS ph3 moonstone Hdi to Xud project - Piggy - 21-04-2014
Ooo I like them lights...what method did you use?
RE: JIMBOS ph3 moonstone Hdi to Xud project - Jimbo - 21-04-2014
(21-04-2014, 07:38 PM)Frosty Wrote: Look out jimbo got an update. Lights look pretty good and the axle looks very nice.
I did even get to have a drive in this the other day when jimbo was over and it does pull well tbf
Cheers mate, i knew the xud would make you smile
And piggy, its just some etech tint spray off ebay
I masked the bottom half up and just gave the top half a light coat, i think its easy to over do tinting too much looks crap IMO.
RE: JIMBOS ph3 moonstone Hdi to Xud project - mikey b - 22-04-2014
Light the light jimbo looking good will get the head of the spare engine this week for you when's the axel going in
RE: JIMBOS ph3 moonstone Hdi to Xud project - 7057sam - 22-04-2014
Beam looks sweet mate
RE: JIMBOS ph3 moonstone Hdi to Xud project - mr_fish - 22-04-2014
I think you should lighten the wheel colour up a bit...
Else it's all looking rather well...seeing as it's a moonshine
Keen to pull the engine again!?
RE: JIMBOS ph3 moonstone Hdi to Xud project - Jimbo - 22-04-2014
(22-04-2014, 11:30 AM)mr_fish Wrote: I think you should lighten the wheel colour up a bit...Keep thinking about wheel colour but can't make mind up, would be a shame to change from black being the factory finish is really nice plus there a bitch to clean.
Else it's all looking rather well...seeing as it's a moonshine
Keen to pull the engine again!?
Not that keen but is gotta be done so crack on i guess, i cant see me putting this much effort into anything again is a mission hahaha
RE: JIMBOS ph3 moonstone Hdi to Xud project - Jimbo - 03-05-2014
Picked up my new wheels the other night really happy with the.condition and finish on paint, paid 100 quid with four maxxis victra ma-z1 tyres one track day old so like new. Will get pics when there on later hopefully.
Any love/hate for saxo wheels?
RE: JIMBOS ph3 XUD *more wheels :/ * - Jimbo - 03-05-2014
Fitted
JIMBOS ph3 XUD *more wheels :/ * - Damo - 03-05-2014
Nice one bey
RE: JIMBOS ph3 XUD *more wheels :/ * - mikey b - 03-05-2014
Looks good
RE: JIMBOS ph3 XUD *more wheels :/ * - Tom - 03-05-2014
I like it, they're nice wheels i think
RE: JIMBOS ph3 XUD *more wheels :/ * - Kezzieboy - 03-05-2014
Looks tidy, and different to the usual clones/challengers/arianes etc!
RE: JIMBOS ph3 XUD *more wheels :/ * - Matt - 03-05-2014
Sweet wheels, always loved them. I've just done the same to my lights! £1 gloss black, job jobbed
RE: JIMBOS ph3 XUD *more wheels :/ * - Jimbo - 03-05-2014
Original plan was to do them white but i like the colour they are now, defo different which i like
Will space them out a little when i get two more spacers
RE: JIMBOS ph3 XUD *more wheels :/ * - Jimbo - 03-05-2014
Cheeky edit
RE: JIMBOS ph3 XUD *more wheels :/ * - padge - 03-05-2014
love vts rims! underrated wheels imo
RE: JIMBOS ph3 XUD *more wheels :/ * - Jimbo - 03-05-2014
Cheers guys, was expecting some serious hate then haha
I know there not gonna be to everyones taste, but i have always liked the shape of these
RE: JIMBOS ph3 XUD *more wheels :/ * - ozonehostile - 03-05-2014
Coming along nicely dude.
Those wheels look much better on a 306 than they do on a Saxo, fine choice sir
RE: JIMBOS ph3 XUD *more wheels :/ * - Mac22 - 03-05-2014
Nice wheels bey
RE: JIMBOS ph3 XUD *more wheels :/ * - 7057sam - 04-05-2014
Love the vts wheels especially in that colour
RE: JIMBOS ph3 XUD *more wheels :/ * - Jimbo - 04-05-2014
(04-05-2014, 11:52 AM)7057sam Wrote: Love the vts wheels especially in that colour
Cheers mate.
RE: JIMBOS ph3 XUD *more wheels :/ * - Jimbo - 22-06-2014
This happened! Not a bad result would have maybe been a.bit.better if i had a rev counter though.
Car is also being broken for parts now. Mot and tax is up,it needs a windscreen and i just cant see that its.worth doing so i have bought a ph1 to play with
RE: JIMBOS ph3 XUD *more wheels :/ * - Jimbo - 22-06-2014
Also a pic from fcs weekend