![]() |
Miami Phase 1 XUD Project! FOR SALE £800 - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Miami Phase 1 XUD Project! FOR SALE £800 (/showthread.php?tid=13977) |
RE: Miami Phase 1 XUD Project! - Stephen - 26-06-2013 Haha thanks mate! I love the colour! Miami Phase 1 XUD Project! - Stephen - 30-06-2013 Representin' yo ![]() RE: Miami Phase 1 XUD Project! - Stephen - 18-07-2013 Been on holiday for a week so haven't done anything recently. Going to clean it today. Fitting a better condition bumper and new fog lights in the next week. Love my car ![]() RE: Miami Phase 1 XUD Project! - Stephen - 18-07-2013 Well fixed the passenger window mech again, should be for the last time though now ![]() Then gave it a quick clean Before: ![]() Hasnt been that dirty since I got it! After: ![]() Halfway through cleaning it noticed this crack in the windscreen: ![]() Not good ![]() Miami Phase 1 XUD Project! - Stephen - 18-07-2013 Rang auto glass, £320!! National windscreens £90+Vat Much better! Miami Phase 1 XUD Project! - Stephen - 18-07-2013 Can see the crack better in this pic ![]() RE: Miami Phase 1 XUD Project! - ozonehostile - 18-07-2013 I love ringing autoglass to lol at their enormous quotes, it was over £500 for a screen in an hdi with the rain sensor, did you get all that sales pitch about how they use genuine peugeot glass rather than pilkington like "other glass repair companies" oh autoglass... RE: Miami Phase 1 XUD Project! - Frosty - 18-07-2013 Cant you get the screen replaced with your insurance? Miami Phase 1 XUD Project! - Stephen - 18-07-2013 Haha that is mental. I didn't even ask them why it was so much. That was after 100 quid discount because I'm with the aa! And no not fully comp so not covered. I did ring Up to check though RE: Miami Phase 1 XUD Project! - D Turbo Lyle - 19-07-2013 definetly a nice car u got urself there mate! looks pretty mean to me! im loving the ride height 306s look mean as f*ck sitting on their hoop!! bit bumpy tho! how much is ur lowered 90mm(2clicks) at the back? RE: Miami Phase 1 XUD Project! - ginge191 - 19-07-2013 been watching this; absoloutely love it so much! reminds me of my sigma; with the stance and shine to it! Can't wait to see this at FCS; it is attending, right? Miami Phase 1 XUD Project! - Stephen - 19-07-2013 Thanks guys! I love it! Not sure how low it is on the back, did it the proper method not by clicks, but probably about 80-90mm yes. And ginge, yes I thought the same! I even commented in toms thread saying it reminds me of mine. And I am attending FCS and the camping ![]() Can't wait to meet everyone properly A few pictures from yesterday, went round to mitches who now has three 306s! ![]() ![]() ![]() Miami Phase 1 XUD Project! - Stephen - 20-07-2013 Mitch came round to do a few things yesterday, tried to adjust the turbo which was seized Put the pipe from the turbo to tmic on properly as it was partially hanging off We thought that it might of been the boost leak that's causing it to only boost 9psi, but no, still reading 9psi. It makes no sense. Standard problem ![]() Mitch trying to adjust the turbo ![]() Then we took the clocks out and went to replace the bulbs as I have had only temperature gauge lights since I got it. The replacements I had we're from phase2 clocks and we realised the holders were different. Went to try and buy the right ones and failed. Decided to try taking the holders apart to change just the bulb from the phase 2 holders into the phase 1 holders, Swapping them over ![]() Hey presto ![]() I can now actually see what speed I'm doing etc at night which is nice Miami Phase 1 XUD Project! - Stephen - 21-07-2013 Fitted the better condition front bumper and new fog lights, looks ten times better ![]() Will get pictures tomorrow ![]() RE: Miami Phase 1 XUD Project! - ozonehostile - 22-07-2013 bumper from lee? if so it is very nice ![]() RE: Miami Phase 1 XUD Project! - Piggy - 22-07-2013 sorted your boost out yet?? Miami Phase 1 XUD Project! - Stephen - 22-07-2013 Yes zakk bumper from lee, looks loads better with it and the new fogs, And piggy, no still reads nine psi. It can't be though, it's too quick RE: Miami Phase 1 XUD Project! - Piggy - 22-07-2013 try a MBC...negates the need to adjust a seized turbo adjuster RE: Miami Phase 1 XUD Project! - Mitch - 22-07-2013 He ordered one yesterday, it sits bang on 9 psi at the moment, but goes far to well, changed the gauge and the pipe to the gauge and its still the same Miami Phase 1 XUD Project! - Stephen - 22-07-2013 Mitch is indeed correct, but I changed the t piece today and its up to 12psi now. Pictures of it clean and new front bumper and lights ![]() ![]() ![]() ![]() RE: Miami Phase 1 XUD Project! - Matt - 22-07-2013 Sure you haven't got any more leaks? Lol RE: Miami Phase 1 XUD Project! - samass - 22-07-2013 i'm liking this a lot actually, she seems pretty tidy! Miami Phase 1 XUD Project! - Stephen - 22-07-2013 Had the inter cooler off can't seem to find any, it goes well its odd RE: Miami Phase 1 XUD Project! - Scott - 22-07-2013 I love this car! Looking forward to seeing it at FCS ![]() RE: Miami Phase 1 XUD Project! - Matt - 22-07-2013 That's a very hefty t peice hahaha Miami Phase 1 XUD Project! - Stephen - 22-07-2013 Thanks Scott ![]() Miami Phase 1 XUD Project! - Stephen - 22-07-2013 And thanks samass, missed your comment first time around. Shame your not coming to FCS! RE: Miami Phase 1 XUD Project! - Mitch - 22-07-2013 Looks like the pipe to the gauge is kinked? Miami Phase 1 XUD Project! - Stephen - 22-07-2013 It's not a kink just goes in a bit RE: Miami Phase 1 XUD Project! - Grant - 23-07-2013 Looking smart. How much water did you use washing it?! You've ny-on flooded the place haha! |