+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Puglove's onxy 'state, bye bye (/showthread.php?tid=13073)
RE: Puglove's onxy 'state, New clutch - rd070707 - 24-07-2013
So all sorted now? seems like I have a rattly bearing now too so will be doing this job shortly
RE: Puglove's onxy 'state, New clutch - Piggy - 25-07-2013
That LUK clutch looks quite worn to me!
Well done though chap...you are no longer a clutch virgin, congratulations!
RE: Puglove's onxy 'state, New clutch - puglove - 25-07-2013
AAHHH think I could well be in need of a gearbox and it wasn't the clutch atall!! f*cking hdi's!!
RE: Puglove's onxy 'state, New clutch - Midnightclub - 25-07-2013
Just whack your spare DT box on it if you've still got it? just swap the bits from the HDi box?
RE: Puglove's onxy 'state, New clutch - Mrs puglove - 25-07-2013
Aint got a spare apart from on Ryans old car.
RE: Puglove's onxy 'state, New clutch - Piggy - 25-07-2013
I got a DT box here!! you can have it for free if you come get it!
RE: Puglove's onxy 'state, New clutch - rd070707 - 25-07-2013
shit one dude! makes me think twice about just whacking a clutch in mine as the box seems a bit notchy atm too
RE: Puglove's onxy 'state, New clutch - puglove - 25-07-2013
Gearbox needed the
had to take it out again and roll the car back BECAUSElightweightracestate?
RE: Puglove's onxy 'state, New clutch - Piggy - 25-07-2013
nice new clutch in there though!
RE: Puglove's onxy 'state, New clutch - puglove - 25-07-2013
well that's summin I guess
RE: Puglove's onxy 'state, New clutch - Grant - 25-07-2013
Nice chain in there! That's something else. Any you've saved weight. See, the pros are adding up!
RE: Puglove's onxy 'state, New clutch - puglove - 25-07-2013
custom solid engine mount is that
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - puglove - 03-08-2013
Well its back together and running, clutch is a lot better......... But its still howling like f*ck, so that rules the clutch & box out, gota be a wheel bearing right? but it spins fine and cant seem to feel any play in it??? is this even possible
well any way as I stupidly thought it was all going to run fin it it was going to be happy days, I treated the state to coilies,clones & pressed plates
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - Piggy - 03-08-2013
still howling?
so when you driving it doesnt change when you pop it in neutral?!
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - Matt - 03-08-2013
prefer the old wheels. Looked awesome! But loving the new lows!
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - puglove - 03-08-2013
(03-08-2013, 09:13 PM)Piggy Wrote: still howling?
so when you driving it doesnt change when you pop it in neutral?!
don't know havnt tried it but it still howls with the clutch in
I cant fit the 17's with the coilies on as they rub the spring seats even with the 20mm spacers
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - ozonehostile - 03-08-2013
Ooh I like it. Agree with matt though, needs something more exotic than clones
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - Matt - 03-08-2013
Soooo 30mm spacers?
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - sam - 03-08-2013
Jack the car up spin the wheel and hold the spring at the same time if it vibrates possible wheel bearing or could be drive shaft as mine was humming before it went
Re: RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - kentiiboii - 03-08-2013
(03-08-2013, 09:16 PM)puglove Wrote:(03-08-2013, 09:13 PM)Piggy Wrote: still howling?
so when you driving it doesnt change when you pop it in neutral?!
don't know havnt tried it but it still howls with the clutch in
I cant fit the 17's with the coilies on as they rub the spring seats even with the 20mm spacers
What Tyre size? I have 205/40s they don't rub.
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - Piggy - 04-08-2013
this howling...did it start when you changed the rear beam, or was it already there??
defo need to do sumit exciting with the clones...looks a bit boring
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - puglove - 04-08-2013
no it was fine for a while James then all of a sudden it started and gt worse quickly.. sounds like front passenger side. what were you thinking?
It might well be shaft sam.. did yours get worse fast? within a few miles?
yes kent 205s coilie right down
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - Toms306 - 04-08-2013
I much prefer it on the 'clones tbh!
As for howling, yes bearings can go without any 'feelable' play, both became really loud on my estate but couldn't find any issues with the wheels jacked up....
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - puglove - 04-08-2013
cheers Tomm i think so too
going to grab a hub & shaft later see if that works
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - Piggy - 04-08-2013
try driving it, engine off, gets rids of a lot of noise, should be able to pinpoint it then.
give it a spin up on stands...should be able to hear it
Re: RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - kentiiboii - 04-08-2013
(04-08-2013, 08:13 AM)Piggy Wrote: try driving it, engine off, gets rids of a lot of noise, should be able to pinpoint it then.
give it a spin up on stands...should be able to hear it
Good idea try towing it
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - sam - 04-08-2013
(04-08-2013, 07:35 AM)puglove Wrote: no it was fine for a while James then all of a sudden it started and gt worse quickly.. sounds like front passenger side. what were you thinking?
It might well be shaft sam.. did yours get worse fast? within a few miles?
yes kent 205s coilie right down
Yeah hummed while driving but as soon as you put your foot down the huming got alot louder then started banging
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - rd070707 - 04-08-2013
Please put the minilites on it, it would be so much win
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - Piggy - 04-08-2013
you should get a knocking with driveshaft. they are rare to hum/whine
RE: Puglove's onxy 'state, Its Alive mwhaha .......kinda - puglove - 04-08-2013
turns out it was the wheel bearing. got it off, still no noticeable play spins freely, tiny bit of grease around it, really odd, swapped for a spare hub and its stopped now so it must have been that,
but now the ABS light is on! ffs this car really doesn't like me!!!!!!
feel free to donate the mini lites RD,
, would love them for this but bank manager says no