Chris_90 D turbo SLOW sleeper Project. Looks like im keeping her :) - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Chris_90 D turbo SLOW sleeper Project. Looks like im keeping her :) (/showthread.php?tid=8987) |
RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Arron - 07-03-2013 You no already got that turbo on!! Going to be quite a sleeper mate RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - puglove - 07-03-2013 iv recently been thinking about this as iv been putting my engine back in , personaly i think the best way to do it without crushing pipes when you do it is ti run it around the back of the block ( like OE) past the battery, Then an enclosed induction facing forward, then a pipe down the side of the rad with one of the race styley scoops infront of the rad, Obviously doing it out of ally pipe and bends for better flow, IMO this is the best way to do it without making the air flow hella turbulant, like id imagine your is now, what do you think? This is what i mean by the racing scoop thingy thing thing http://www.merlinmotorsport.co.uk/p4213/152MM-X-51MM-RECTANGLE-DUCT/product_info.html RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Chris_90 - 07-03-2013 That is my plan tbh to get it back over the other side but im not sure how to get it past the manifold/master cylinder as its tight as it is maybe the 405 air box/pipe set up would be best? But is that to restrictive? I havent got any room for one of them scoops as intercooler fills all the bumper grill, im thinking morrets with cold air feed from them but will go aginst the sleeper so not sure if thats a good idea or not RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - puglove - 07-03-2013 Just had a little look at the 405, that pipe looks ideal, apart from it would fawl my FMIC pipe (see pic below) But actually looks spot on for yours, i wouldnt use that air box though, not even sure it would fit. as for the air feed it is pretty difficult to find some where decent for it on theses things by the time youv added all the fmic parts , but IMO morettes wouldnt look right on yours not with that bumper. you will have to remove the indicater and put it the lol RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - ozonehostile - 07-03-2013 i have a 405 airbox and pipes for sale if your interested. tbh it is a much better layout for better airflow RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - CJ_Derv - 07-03-2013 (07-03-2013, 09:24 PM)puglove Wrote: Just had a little look at the 405, that pipe looks ideal, apart from it would fawl my FMIC pipe (see pic below) But actually looks spot on for yours, i wouldnt use that air box though, not even sure it would fit. Thought that setup looked familiar RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - C2K - 07-03-2013 (07-03-2013, 09:24 PM)puglove Wrote: that pipe looks ideal, apart from it would fawl my FMIC pipe Say what? Foul? RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - puglove - 08-03-2013 (07-03-2013, 10:08 PM)CJ_Derv Wrote:(07-03-2013, 09:24 PM)puglove Wrote: Just had a little look at the 405, that pipe looks ideal, apart from it would fawl my FMIC pipe (see pic below) But actually looks spot on for yours, i wouldnt use that air box though, not even sure it would fit. Parts of it are familiar iv replaced the odd bits of exhaust tube now (07-03-2013, 10:19 PM)C2K Wrote:(07-03-2013, 09:24 PM)puglove Wrote: that pipe looks ideal, apart from it would fawl my FMIC pipe Dont take the piss out of my lack of spelling skills RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - CJ_Derv - 08-03-2013 Looks well pal RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Chris_90 - 08-03-2013 (07-03-2013, 09:54 PM)ozonehostile Wrote: i have a 405 airbox and pipes for sale if your interested. tbh it is a much better layout for better airflow Yer i asked in for sale section but was abit much for me unless you wana do it cheaper for me? RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - zx_volcane - 08-03-2013 Looking good, you'll be glad you went for a bigger turbo RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Chris_90 - 08-03-2013 (08-03-2013, 10:00 AM)zx_volcane Wrote: Looking good, you'll be glad you went for a bigger turbo Hope so just abit worried about the lag that people go on about as i do all my mileage round town stop start so not sure how i will get on with it will have to see when i get it on RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - CJ_Derv - 08-03-2013 What pump you running chris? To be honest the lag compared to a T2 isnt much more IMO a 13t can hit full boost around 3k and if gov modded can go to about 5k safely i sometime push mine to about 6k lol RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Chris_90 - 08-03-2013 (08-03-2013, 10:21 AM)CJ_Derv Wrote: What pump you running chris? To be honest the lag compared to a T2 isnt much more IMO a 13t can hit full boost around 3k and if gov modded can go to about 5k safely i sometime push mine to about 6k lol just 9mm bosch with lda grind i do want it gov modding but i need to get some one to do it for me as im not confident enough to do it my self RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Jenkosowls - 08-03-2013 Chris told you il do your gov mod! RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Chris_90 - 08-03-2013 (08-03-2013, 11:02 AM)Jenkosowls Wrote: Chris told you il do your gov mod! I no mate just getting time to come up and some decent weather not in any rush to get it done, depending on weather i will be fitting turbo not this sunday, sunday after, so probably after that i will want it doing but i will let you no RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - CJ_Derv - 08-03-2013 Trust me get it done asap you wont get the full benefit from a bosch and td04 without a gov mod jenks knows his shizz n will have it done in no time RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Chris_90 - 08-03-2013 (08-03-2013, 01:10 PM)CJ_Derv Wrote: Trust me get it done asap you wont get the full benefit from a bosch and td04 without a gov mod jenks knows his shizz n will have it done in no time i no he's the one that made my car go from no power to slipping the clutch power lol although clutch dont slip any more, but i have a feeling once td04 is on then im gona have big slipping issues RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Chris_90 - 09-03-2013 little update went to scrappy today and spotted these on a phase 1, need a clean like Not sure if i should put them on or not with me doing a sleeper look, what you guys think? RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Ben - 09-03-2013 I wouldn't put them on I think it'd spoil the sleeper look. Liking the project btw RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Chris_90 - 14-03-2013 Bit of an update decied not to fit the spoiler and mirror caps, Fitted a new badge ;-) Now officially XNd lol Also got some genuine subaru gaskets for the td04 Was hopeing to get it on this week end but weather looks like its gona be shite agin Carnt wait to get the turbo on as its cost me a fortune so far in bits etc hope its worth it when its on RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Jenkosowls - 14-03-2013 you fitting the turbo chris? RE: Chris_90 D turbo sleeper Project, Soon to be TD04'ed - Chris_90 - 14-03-2013 (14-03-2013, 01:38 PM)Jenkosowls Wrote: you fitting the turbo chris? Yer will be doing it my self, had turbo off when i put new inlet/exhast gasket on but didnt have the td04 ready then. RE: Chris_90 D turbo sleeper Project, NOW TD04'ed - Chris_90 - 17-03-2013 TD04 is now on just got a problem with a oil leak I belive its comeing from the oil return will get it sorted tomorrow pics comeing soon Chris_90 D turbo sleeper Project, NOW TD04'ed - MarkTD - 17-03-2013 Excellent work mate! I shall have to come and see it! RE: Chris_90 D turbo sleeper Project, NOW TD04'ed - Chris_90 - 17-03-2013 Thanks mate yer defo come up when ever Pic here turbo off Side by side turbos (k14 left TD04 right) TD04 on And the bonnet stay kept getting in the way so did this lol So got the turbo on to find it hitting the bulk head didnt want to piss around takeing all off agin so ended up useing drill and chaseing it out a bit (couldnt get grinder in) Got it all back togeather i turned the pump right down so i can let the engine get used to the boost still boosting 15psi tho, been for a quick spin seem ok not that great at min with me turning pump down. Will slowly keep turning it up till i get to around 25psi i think or there abouts. Just got an oil leak to sort out in morning hopeing its a simple fix got a feeling its the oil return but not 100% sure yet. Next up 283mm Brakes (if i can every find some at the right price) Gov mod Then maybe look in to lowering it 40mm but not sure about that Comments welcome RE: Chris_90 D turbo sleeper Project, NOW TD04'ed - Ricky - 17-03-2013 I think 30mm would fit better with the sleeper look. Mine used to tap the bulkhead slightly, it's the most annoying noise in the world! Looking good though, boost is highly addictive! RE: Chris_90 D turbo sleeper Project, NOW TD04'ed - Chris_90 - 17-03-2013 I drilled the bulk head out got about. 1cm all way round the cold side/outlet. I noabout boost being adictive when I bought this car said it was staying standard lol 30mm is a good idea aslong as I can get 30mm springs just wana stiffen it up abit but not to much as needs to still be ok for bumps RE: Chris_90 D turbo sleeper Project, NOW TD04'ed - Ricky - 17-03-2013 Well i'm 40mm, and it's not very low really, 30mm would stiffen things up a bit without looking obvious to others. RE: Chris_90 D turbo sleeper Project, NOW TD04'ed - ozonehostile - 17-03-2013 finally!!! epic sleeper starts now |