![]() |
Sigma 5dr 1.9 XUD Project Dyno Results Included - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Sigma 5dr 1.9 XUD Project Dyno Results Included (/showthread.php?tid=3849) |
RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 22-07-2013 (22-07-2013, 07:07 PM)cwspellowe Wrote: Buy my banded steels so I can buy different banded steels What if I gave you some exhaust pipe in exchange ![]() ![]() (22-07-2013, 07:18 PM)rd070707 Wrote: Or........buy my minilites so I can buy pellowes steels. Pellowe what offset are they? Not too sure what they look like, I'll have a look in a sec. (22-07-2013, 07:45 PM)martyn92 Wrote: Not too bad Cheers mate, nah not yet, been busy with other things and in all honesty haven't done enough research yet to know how to do it! RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - martyn92 - 22-07-2013 Nooo. Your living with like half power ! ![]() RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - rd070707 - 22-07-2013 I think they would look awesome on yours. If you wanted I could refurb them a different colour for you RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 05-08-2013 Update time ![]() Was about to write a lovely piece about how much I love my car and how reliable it has been, but NOOOOOOOOOOOOOO. Had a bit of a nightmare today. To start with, got my wing mirror destroyed by a truck and it put a small dent in the door ![]() Then driving home from work, car went all juddery all of a sudden and something felt chronically bad. Turns out, one of the caliper bolts felt like going on holiday and I now have a lovely mark all the way round my wheel. Lightened alloy ftw I guess. Also, gov modded the pump with Jonny the other night, which is an epic mod. Don't know it has taken us so long to get it done! I'm also wanting to get my intake sorted and I'm struggling to figure how is best to do it. Anyone with a TD04 got advice? I'm wanting to bring the pipe round the back of the block and go into a enclosed box above the gearbox, just like the standard HDi set up, but bigger. But, I don't think there's enough room to get straight up to 3" off the turbo, so is a 57mm 180 degree the best and then bump it up to 3" along the back? RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - martyn92 - 05-08-2013 That wheel reminds me of Europe and my brake pad haha! I have exactly the same problem with the air intake, a 57mm pipe at the back of the block gets squished under the master and puts holes in the pipe (for me anyway) RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - Frosty - 05-08-2013 Have a look in my d turbo project thread to see how I did my intake. Its not a TD04 turbo but I imagine it would be similar. Let me know if you want any help/info RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 19-08-2013 Update time: Most exciting update is I've refurbished my wheels. Gone for orange and they looks pretty damn smart, well I'm bound to say that ![]() It's properly dirty from Knockhill, so I'll give it a proper clean and get much better photos during the week. Had a go with trying to sort out my intake with Jonny the other day and that didn't quite work out. Battled for a while to get it to fit properly without the bend getting squashed and it's not touching the master cylinder, so it should be all good once its sorted. Other issues was the pipe i got from the reducer to the bend was marginally too big, so we'll come back to that at the weekend. Anyway, once it's all sorted I want it to look like this: I've got some 20mm spacers for the back, just need to buy a tyre and then that will be sorted. Got a front mount intercooler on the way as well, so need buy all the pipe and bends for that. FFS!!! So was all looking good, but picked a chronic boost leak at knockhill. My D seal is split, so instant gasketed that didn't work and the pipe from the turbo to the top mount had a slit in the protection part on the top, so may have split the pipe as well, but couldn't tell. Hoping it's one of those. Pellowe noticed some soot down the back, so I'm really REALLY hoping I haven't blown the gasket. RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - martyn92 - 19-08-2013 Actually quite like them wheels! RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - samass - 19-08-2013 you need some 20mm spacers on the back dude RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 19-08-2013 I've got some sat downstairs. I ordered the wrong wheel bolts though, but I've got some special washers now. So once I've got my replacement tyre, that will get sorted ![]() RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - mr_fish - 20-08-2013 awesome setup! I want your exhaust though.... RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 22-08-2013 (20-08-2013, 01:58 PM)mr_fish Wrote: awesome setup! It can be all yours for £100,000,000 MWAHAHAHAHAAHA Well had a bit of a disappointment with my spacers, the people who sent me them for some reason only gave me one bolt that is the correct length. So I'll give them a call tomorrow so see what has happened. Thankfully, my lack of boost appears to be a split pipe. Will get a replacement one this weekend and hopefully all will be fine again ![]() Gave the car a clean tonight, so you can now have a much better idea of how the wheels look! RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - Jonny81191 - 22-08-2013 Looks shit. RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - samass - 22-08-2013 sort out your f*cking pictures you spanner. caption them dammit!! RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 22-08-2013 What do you mean?? I talked about everything at the start and then put some pictures in. Would you prefer a bit of writing then a picture and then some more writing and then another picture??????????? RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - samass - 22-08-2013 In a word, yes. RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 22-08-2013 Its a good job you are not a female, you would quite literally be the worlds biggest nagging girlfriend! RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - samass - 22-08-2013 Nah, I'd be single, and a proper slut. RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 22-08-2013 hahaha, that's what I always thought I'd be like! RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - samass - 22-08-2013 Taking all of the cock ![]() tbf, I'd be in porn. Especially if I was a midget. RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - Tom - 23-08-2013 f*ck this things looks amazing! I want a phase 2 ![]() RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 28-08-2013 Cheeky lap at Knockhill ![]() http://www.youtube.com/watch?v=jZm-eNkdWVs RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 29-08-2013 Got the spacers fitted. Looks spot on on the passenger side, but has highlighted how ridiculously offset the beam is when you look at the other side! RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - Jonny81191 - 29-08-2013 And removed the rear seats to stop the scrubbing?? Looks a little high. RE: Sigma 5dr 1.9 XUD Project - with added boost and a yellow heart - c.gerrard - 29-08-2013 That picture is with the seats in. Must be your imagination..... On a slightly random note, I got told my car looks like a jaffa cake the other day ![]() RE: Sigma 5dr 1.9 XUD Project Jaffa Cake - c.gerrard - 21-09-2013 Exciting news! Had a pretty full on day getting a front mount set up sorted. Jonny was absolute hero (once again ![]() Got a number of jobs that still need sorting, but I'll get all those sorted tomorrow morning. Including an epic bumper, unfortunately mine doesn't fit properly, so we had a spare blaze one which has been "modified." I'm very VERY reluctant to hack into the current one! RE: Sigma 5dr 1.9 XUD Project Jaffa Cake - Tom - 21-09-2013 Looks epic!! RE: Sigma 5dr 1.9 XUD Project Stage 2 Epicness - devils_fuel - 21-09-2013 Is that a hdi airbox on the previous page, the bay picture? If so was it easy to fit, so so might I might fit one if this cone filters not any better RE: Sigma 5dr 1.9 XUD Project Stage 2 Epicness - Piotrek Wielos - 22-09-2013 Looks great! RE: Sigma 5dr 1.9 XUD Project Stage 2 Epicness - c.gerrard - 22-09-2013 It was a hdi air box yeah. Fairly easy, I had to chop the battery tray a bit and a bracket would need making up, so could be done. Never got that fully sorted and now that there's intercooler pipes going through, it didn't quite work out. |