306oc - Peugeot 306 Owners Club & Forum
205 dt sleeper, engine in :) - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Other Marques (https://www.306oc.co.uk/forum/forumdisplay.php?fid=38)
+--- Forum: Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=39)
+--- Thread: 205 dt sleeper, engine in :) (/showthread.php?tid=17887)

Pages: 1 2 3 4 5 6

RE: 205 dt sleeper, engine in :) - Paul_13 - 03-08-2014

[url="http://s1224.photobucket.com/user/paul13205/media/IMG_20140724_203252_zpstdmoufkk.jpg.html"][Image: IMG_20140724_203252_zpstdmoufkk.jpg][/url]

My new intercooler
[url="http://s1224.photobucket.com/user/paul13205/media/IMG-20140728-WA0000_zpstlsdjjw4.jpeg.html"][Image: IMG-20140728-WA0000_zpstlsdjjw4.jpeg][/url]

Replacement rad, not cheap!
[url="http://s1224.photobucket.com/user/paul13205/media/IMG-20140726-WA0002_zpsignrqhjh.jpg.html"][Image: IMG-20140726-WA0002_zpsignrqhjh.jpg][/url]

Bent this trying to get the clutch arm pin out.
Straightened out with a hammer and reused Wink
[url="http://s1224.photobucket.com/user/paul13205/media/IMG-20140726-WA0004_zpspvicipna.jpg.html"][Image: IMG-20140726-WA0004_zpspvicipna.jpg][/url]

The engine ready to go in Smile
[url="http://s1224.photobucket.com/user/paul13205/media/IMG-20140724-WA0003_zpscrjug9ju.jpg.html"][Image: IMG-20140724-WA0003_zpscrjug9ju.jpg][/url]

new bits
[url="http://s1224.photobucket.com/user/paul13205/media/IMG_20140726_203217_zps2tilke8h.jpg.html"][Image: IMG_20140726_203217_zps2tilke8h.jpg][/url]

Engine going in
[url="http://s1224.photobucket.com/user/paul13205/media/IMG_20140726_203124_zpsjjrghkxn.jpg.html"][Image: IMG_20140726_203124_zpsjjrghkxn.jpg][/url]

Hanging on its mounts
[url="http://s1224.photobucket.com/user/paul13205/media/IMG-20140802-WA0002_zpsddafyzvy.jpeg.html"][Image: IMG-20140802-WA0002_zpsddafyzvy.jpeg][/url]

Loads of room around the turbo
[url="http://s1224.photobucket.com/user/paul13205/media/IMG-20140802-WA0005_zps7r5yrqbq.jpeg.html"][Image: IMG-20140802-WA0005_zps7r5yrqbq.jpeg][/url]

Air feed pipe in.
The coolant hose around the back of the engine was a complete bitch to get right. There's no room!
[url="http://s1224.photobucket.com/user/paul13205/media/IMG-20140802-WA0009_zpsqo2ndzae.jpeg.html"][Image: IMG-20140802-WA0009_zpsqo2ndzae.jpeg][/url]
[url="http://s1224.photobucket.com/user/paul13205/media/IMG-20140802-WA0011_zpssikgkkhu.jpeg.html"][Image: IMG-20140802-WA0011_zpssikgkkhu.jpeg][/url]
[url="http://s1224.photobucket.com/user/paul13205/media/IMG-20140802-WA0013_zpsoufapfdl.jpeg.html"][Image: IMG-20140802-WA0013_zpsoufapfdl.jpeg][/url]

RE: 205 dt sleeper, engine in :) - Niall - 03-08-2014

Didn't hang about getting that sorted! Will it be at ace this month?

RE: 205 dt sleeper, engine in :) - Paul_13 - 03-08-2014

Hopefully mate, my Nan needs her Yaris back which I'm borrowing

RE: 205 dt sleeper, engine in :) - Niall - 03-08-2014

Dude can you even fit in a Yaris? haha

RE: 205 dt sleeper, engine in :) - aggyj17 - 03-08-2014

Looking good mate. Cooler system looks really similar to mine best way to route it imo.

RE: 205 dt sleeper, engine in :) - Paul_13 - 04-08-2014

It lives!

RE: 205 dt sleeper, engine in :) - procta - 04-08-2014

(04-08-2014, 04:16 PM)Paul_13 Wrote: It lives!

good! another sleeper lives!

RE: 205 dt sleeper, engine in :) - Paul_13 - 10-08-2014

good news is it hasn't blown up yet!

just cranked the boost and fuelling up, await test drive tomorrow morning.
also clutch is slipping Sad need an uprated one.

Can someone send me a link for the cg one please

RE: 205 dt sleeper, engine in :) - procta - 12-08-2014

paul paint the intercooler will you fella, so it adds more sleeper.

RE: 205 dt sleeper, engine in :) - Paul_13 - 12-08-2014

It's black now don't you worry

RE: 205 dt sleeper, engine in :) - procta - 12-08-2014

(12-08-2014, 06:18 PM)Paul_13 Wrote: It's black now don't you worry

good! just need to test her now, my new shell as gelled really well with my vvc setup, gelled better than my old shell did.

RE: 205 dt sleeper, engine in :) - Paul_13 - 13-08-2014

.....

RE: 205 dt sleeper, engine in :) - silverzx - 13-08-2014

How much was the rad?

RE: 205 dt sleeper, engine in :) - Paul_13 - 13-08-2014

Done 200 miles on the engine soo far, running at around 30+ psi. Clutch is slipping at high rpm.
It's still very driveable off boost and I swear my mpgz has gone up.

Also Costco are selling veg oil at 64p/l bargain! If any one local needs any I may be able to get you some, obviously bulk orders not just 1 or 2. I could fit possibly 10 at a push
(13-08-2014, 01:56 PM)silverzx Wrote: How much was the rad?

£200 posted, felt like crying after I had ordered it.
Mind you the local motor factors wanted 300 + vat

RE: 205 dt sleeper, engine in :) - silverzx - 13-08-2014

(13-08-2014, 01:57 PM)Paul_13 Wrote: Done 200 miles on the engine soo far, running at around 30+ psi. Clutch is slipping at high rpm.
It's still very driveable off boost and I swear my mpgz has gone up.

Also Costco are selling veg oil at 64p/l bargain! If any one local needs any I may be able to get you some, obviously bulk orders not just 1 or 2. I could fit possibly 10 at a push
(13-08-2014, 01:56 PM)silverzx Wrote: How much was the rad?

£200 posted, felt like crying after I had ordered it.
Mind you the local motor factors wanted 300 + vat

F**k me! Did you not think about bodging a 306 rad on or something?

RE: 205 dt sleeper, engine in :) - Paul_13 - 13-08-2014

I've got a gti rad lying about, but after a good think I opted for a dt rad. I didn't think the gti would cope

RE: 205 dt sleeper, engine in :) - aggyj17 - 13-08-2014

£200 for the rad. There's someone selling them on ebay an uprated ally rads for the same price for a dturbo

RE: 205 dt sleeper, engine in :) - silverzx - 13-08-2014

(13-08-2014, 02:29 PM)aggyj17 Wrote: £200 for the rad. There's someone selling them on ebay an uprated ally rads for the same price for a dturbo

Huh?

Is there any reason why it specifically has to be a 205 rad? Why not buy a bigger aftermarket rad for something else and "make it fit"?

Re: RE: 205 dt sleeper, engine in :) - aggyj17 - 13-08-2014

(13-08-2014, 02:39 PM)silverzx Wrote:
(13-08-2014, 02:29 PM)aggyj17 Wrote: £200 for the rad. There's someone selling them on ebay an uprated ally rads for the same price for a dturbo

Huh?

Is there any reason why it specifically has to be a 205 rad? Why not buy a bigger aftermarket rad for something else and "make it fit"?
It's not just a 205 rad it has to be a 205 dturbo rad as they have a thicker core the uprated ones are 52mm iirc and have a better flow than standard.

Yes you will be able to fit a universal one but the hoses need to come out in the right place and need to make sure the fan switch is there aswell so would be easier to just get one made for the car

RE: 205 dt sleeper, engine in :) - silverzx - 13-08-2014

Why do the hoses "need to come out in the right place", can just buy hoses and direct it where it needs to go?

Look at this bad boy for £480.

[Image: peugeot-205-alloy-short-height-competition-radiator.jpg]

RE: 205 dt sleeper, engine in :) - aggyj17 - 13-08-2014

http://m.ebay.co.uk/itm/261242393778?nav=WATCHING_ACTIVE

This is the one I'm watching

RE: 205 dt sleeper, engine in :) - Paul_13 - 14-08-2014

Seems as though I owe cg an apology. The royal mail took the piss

RE: 205 dt sleeper, engine in :) - Paul_13 - 15-08-2014

[Image: IMG-20140815-WA0002_zps7bitwol4.jpeg]
[Image: IMG-20140815-WA0000_zps40hhkqkl.jpeg]
Not f*cking happy

RE: 205 dt sleeper, engine in :) - Chris_90 - 15-08-2014

What's wrong? Or am I missing something?

RE: 205 dt sleeper, engine in :) - Paul_13 - 15-08-2014

[Image: 20140815_110902_zpsdshsq7d4.jpg]

RE: 205 dt sleeper, engine in :) - Paul Baldwin - 15-08-2014

Hard to see from the photos but is the hole not square to the clutch face? Surely not?!

RE: 205 dt sleeper, engine in :) - Paul_13 - 15-08-2014

The splines aren't formed properly

RE: 205 dt sleeper, engine in :) - Paul Baldwin - 15-08-2014

ah. Zooming in on photo helps lol. Not good qc anyway!

RE: 205 dt sleeper, engine in :) - Poodle - 17-08-2014

Standard CG tbh, don't know why the hell people keep buying them, they're beyond shit. Surprised that snail fits in there quite so neatly, good job!

RE: 205 dt sleeper, engine in :) - Paul_13 - 17-08-2014

I didn't read up properly before ordering it really.
Not impressed with the initial customer service I received, after a bit of moaning and speaking to some one else, I've managed to get a replacement.

Thanks for the good words. Was a squeeze!