+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: FCS prep phase win sigma gearbox mounted (/showthread.php?tid=19956)
Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - turkish - 08-04-2014
Looking soo good mate! Can wait to see this rip up jimbos smug face
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 09-04-2014
I hope it's pretty fast when done just got to get it all finished and then set up but to be fair jimbos is pretty rapid
Another thing I have been doing is trying to sort the inside out gauge etc
Been playing with the emp as well
![[Image: 52005467-E99F-4D7C-90BC-B2F41D6DF4D0_zpsvatnsd3s.jpg]](http://s852.photobucket.com/user/mikebaker345/media/52005467-E99F-4D7C-90BC-B2F41D6DF4D0_zpsvatnsd3s.jpg.html)
![[Image: CE849198-C9E3-4D9D-8B07-9AA5072007D8_zpsoxlzwi4k.jpg]](http://s852.photobucket.com/user/mikebaker345/media/CE849198-C9E3-4D9D-8B07-9AA5072007D8_zpsoxlzwi4k.jpg.html)
This goes to a brake pipe end threaded into the manifold acting as a heat sink
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - ozonehostile - 09-04-2014
Looks great so far man
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 09-04-2014
Thanks getting there slowly things just taking time only like 8 weeks till fcs so should be k lol
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 13-04-2014
Tiny update sorted actuator yesterday and sorted all the main battery cable and the battery box
![[Image: D33FCB0F-CD05-43A3-8D65-814E1E0F930F_zpskppojorz.jpg]](http://s852.photobucket.com/user/mikebaker345/media/D33FCB0F-CD05-43A3-8D65-814E1E0F930F_zpskppojorz.jpg.html)
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - C.A.R. - 13-04-2014
Good progress, but is that some kind of badass dagger in your boot?!
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 13-04-2014
(13-04-2014, 02:04 PM)C.A.R. Wrote: Good progress, but is that some kind of badass dagger in your boot?!
It's my wiring knife sort of thing just somet I got down the garage lol
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - Grant - 13-04-2014
Wiring knife?!
Thats a bayonet!!! haha
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 20-04-2014
Got my exhaust all made up toady came out pretty good really
Got the heater matrix pipes sorted as well just getting all the guages plumed in then hope to put the front back on
![[Image: EDE700D3-F8B8-4982-BB90-DCD15BFFE357_zpshrfbca6t.jpg]](http://s852.photobucket.com/user/mikebaker345/media/EDE700D3-F8B8-4982-BB90-DCD15BFFE357_zpshrfbca6t.jpg.html)
![[Image: C361FBD5-8FE9-43F4-833A-27107E9F15E5_zps9asxwegh.jpg]](http://s852.photobucket.com/user/mikebaker345/media/C361FBD5-8FE9-43F4-833A-27107E9F15E5_zps9asxwegh.jpg.html)
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - Jimbo - 21-04-2014
Exhaust looks win mate, wish i hadnt sold mine now
Cant be far off now surely
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 22-04-2014
Thanks chap yep getting there started to put slam pannel back and tried to for intercooler but it's far to big so a new one on the way
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - Frosty - 22-04-2014
You manage to get a smaller twin pass intercooler?
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - mr_fish - 22-04-2014
she's coming along nicely chief!
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 22-04-2014
Managed to get another intercooler mr frost not a twin pass but should work ok just got to wait for bits to turn up then should be nearly fin mark
RE: Engine is in finally mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 30-04-2014
Right getting close to fcs do fort I better get me arse in gear got a fiat few bits done need to get a list of bits left going hope to have every thing sorted pretty soon getting excited for the first test drive now
Had few issues with my massive twin pass so went for this
![[Image: BC0A5679-1673-4E6E-AAD9-C72D918B839F_zpsu21h71ih.jpg]](http://s852.photobucket.com/user/mikebaker345/media/BC0A5679-1673-4E6E-AAD9-C72D918B839F_zpsu21h71ih.jpg.html)
![[Image: 7E7CCDE6-F724-4FE7-BC19-B681B90CBD70_zpsbygyjz19.jpg]](http://s852.photobucket.com/user/mikebaker345/media/7E7CCDE6-F724-4FE7-BC19-B681B90CBD70_zpsbygyjz19.jpg.html)
![[Image: AEA786E6-55EB-4DEC-B80B-6197A00B8634_zps86uii4vf.jpg]](http://s852.photobucket.com/user/mikebaker345/media/AEA786E6-55EB-4DEC-B80B-6197A00B8634_zps86uii4vf.jpg.html)
Got me bonnet on as well and every thing misses witch is good lol
And spent bit of time sorting all my gauges and moving radio
![[Image: 35F41635-54B3-44D6-BAE5-13904D3BFDFC_zpservbhk6m.jpg]](http://s852.photobucket.com/user/mikebaker345/media/35F41635-54B3-44D6-BAE5-13904D3BFDFC_zpservbhk6m.jpg.html)
Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - Frosty - 30-04-2014
Look pretty epic mike! Keep up the good work. Can't be far off now
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - zx_volcane - 30-04-2014
Christ that is some pipe routing, what went wrong with the twin pass?
You gone for 2 1/4 or 2 1/2?
mines still at 2 inch pipe, not sure where the limitations are on ic piping, conflicting info out there.
turbo is in a nice position, loving the v band on the downpipe too, wish I'd gone for one of those!
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - Tom - 30-04-2014
Oooooooo looks so cool!!
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 30-04-2014
(30-04-2014, 07:45 AM)zx_volcane Wrote: Christ that is some pipe routing, what went wrong with the twin pass?
You gone for 2 1/4 or 2 1/2?
mines still at 2 inch pipe, not sure where the limitations are on ic piping, conflicting info out there.
turbo is in a nice position, loving the v band on the downpipe too, wish I'd gone for one of those!
The twin pass I had was way to big think it the
Biggest one they do on eBay I am using 2.5 piping not sure
Meself if it will make much difference and the
V band I thort would make it easier to adjust my down pipe and the merc turbo uses a v band so had half on the turbo it's 3 inch out of the turbo and then I have reduced it down to 2.5 hope
To c how it goes in a few weeks or
Less
(30-04-2014, 02:42 PM)Tom Wrote: Oooooooo looks so cool!!
Thanks tom hope it goes as well as it looks
Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - zx_volcane - 30-04-2014
Was the same intercooler as I'm running I think, only just got mine behind the bumper!
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - Tom - 30-04-2014
Also lol at the cutlass in the boot! Wiring knife my arse
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 30-04-2014
(30-04-2014, 05:21 PM)Tom Wrote: Also lol at the cutlass in the boot! Wiring knife my arse
Yep it's a little big never leaves the garage
(30-04-2014, 04:23 PM)zx_volcane Wrote: Was the same intercooler as I'm running I think, only just got mine behind the bumper!
The one I had including the inlets was 40 inches long not sure if there is any more room on a zx but didn't want to chop me bumper to much yours seams to fit pretty well looking forward to seeing it a fcs
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - mr_fish - 01-05-2014
Chronic Piping Mike!
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 01-05-2014
(01-05-2014, 10:12 AM)mr_fish Wrote: Chronic Piping Mike!
2.5 looks good nice and shiny got me air filter all
Sorted last night you will ave to pop over again mark changed a bit since ya saw it last
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 07-05-2014
Haven't done much to it really just been doing things like getting gearbox oil and drive shaft nuts had a bit of time so I thort I would see why it used to surge a bit checked fuel filter and that was all fine so I removed the fuel strainer from the tank and found this think this was my problem lol bit dirty
![[Image: 615979F6-0AC9-40CF-A9B9-A76C2050BAB9_zpslp2yecp2.jpg]](http://s852.photobucket.com/user/mikebaker345/media/615979F6-0AC9-40CF-A9B9-A76C2050BAB9_zpslp2yecp2.jpg.html)
![[Image: 78289D11-DF07-44F9-A6AF-2DAA83979A92_zpsmnb0nxul.jpg]](http://s852.photobucket.com/user/mikebaker345/media/78289D11-DF07-44F9-A6AF-2DAA83979A92_zpsmnb0nxul.jpg.html)
Cleaned it all ok so the fuel should flow good again now
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - zx_volcane - 07-05-2014
crikey, what the heck is all that rubbish in there?
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 08-05-2014
(07-05-2014, 09:14 PM)zx_volcane Wrote: crikey, what the heck is all that rubbish in there?
Not sure but had a bit of time so I thort I would check in there before she goes back on the road
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - Piggy - 08-05-2014
I had the red flakes when I cleaned my old ph1 out...weird.
Looking fapping epic fella
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - ozonehostile - 08-05-2014
That pipe route looks great, may have to change the route I'm going as I've got major clearance issues with the phase 1 bumper.
That strainer is probably the worst one I've seen yet haha
RE: Getting close to fcs mikey b`s phase 1 sigma gearbox mounted vnt - mikey b - 09-05-2014
(08-05-2014, 06:14 AM)Piggy Wrote: I had the red flakes when I cleaned my old ph1 out...weird.
Looking fapping epic fella
Yep the red flakes bit strange as you had them as well and thanks it's all getting a bit tight under there now
(08-05-2014, 06:36 AM)ozonehostile Wrote: That pipe route looks great, may have to change the route I'm going as I've got major clearance issues with the phase 1 bumper.
That strainer is probably the worst one I've seen yet haha
Yep the strainer was pretty bad and I done he pipe work like that cus didn't want to cut the bumper to much and I liked washer bottle lol