306oc - Peugeot 306 Owners Club & Forum
Breaking - China 306 Meridian Estate!! - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Breaking - China 306 Meridian Estate!! (/showthread.php?tid=11861)

Pages: 1 2 3 4 5 6


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 31-03-2013

I do Dan, its currently on ebay at £50 plus postage with several watchers....

Sam I could've done it much quicker tbh, just running out of space so selling stuff before I can remove the rest lol.


RE: Breaking - China 306 Meridian Estate!! - DanWY - 31-03-2013

Ahhh so it was yours I found on ebay then, I shall keep watching it Smile


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 31-03-2013

Yup, more than likely mine. Big Grin

I've got a few more bits off if anyone's intersted before they go on ebay -

Starter
Alternator
Pas pump
Rear bumper
Rear beam
Rear arch liners (only partial liner on pass side)
Rads and fans (can't guarantee air con rad as there was no gas at all in my ac system)
Front wings
Auto wiper motor (no skipping)
Arms and aerotwins

And more lol....


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 01-04-2013

Mmmm wondered what a rallye estate would look like! lol

[Image: Breaking3065277_zps82dbeb40.jpg]


Anyway, most parts off now, just engine side of things now and then panels last. Any interest in the below items?

Have the rad pack -

[Image: Breaking3065276_zpscd410ad7.jpg]

[Image: Breaking3065275_zpsb75b9ab8.jpg]

Climate unit - but the bellend that ruined the majority of the interior doing the matrix change also managed to break the matrix housing, not sure if it affects anything though, doesn't leak as far as i know...unless ofcourse I had an airlock for the entire time I owned it... lol

[Image: Breaking3065273_zpsc86a1864.jpg]

[Image: Breaking3065274_zps7bb66c1f.jpg]

Fuel tank -

[Image: Breaking3065271_zps8837200b.jpg]

HDi lift pump (been replaced at some point as the ring around it has been mashed but cant find anything in the s/h for it)

[Image: Breaking3065272_zps7783843d.jpg]


Also found some other interesting stuff lol...firstly the reason my blower motor didn't work often. Rolleyes

[Image: Breaking3065264_zpsa77b0b72.jpg]

And also this, not sure what it was for but it looks as though it got pretty hot! Confused

[Image: Breaking3065263_zps533814a2.jpg]

[Image: Breaking3065262_zpsa65d448e.jpg]


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 02-04-2013

No interest in anything else? Sad

Looks like I'll be spending more time on ebay then lol.


RE: Breaking - China 306 Meridian Estate!! - Matt - 02-04-2013

How much for the shell ninja


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 02-04-2013

I'm not posting the shell............ Tongue

But if you come and take it for scrap value you're welcome to it.....I'll even include the rust for free!


RE: Breaking - China 306 Meridian Estate!! - Willo - 02-04-2013

How much for Passenger side front electric window motor and mechanism posted mate


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 02-04-2013

I'm selling the doors whole on ebay atm. If they don't go whole I'll strip them and let you know. Smile


RE: Breaking - China 306 Meridian Estate!! - Willo - 02-04-2013

Providing its same as this one I found on eBay

http://item.mobileweb.ebay.co.uk/viewitem?itemId=370775212742&index=10&nav=WATCHING&nid=37282453105

Ok mate no worries


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 02-04-2013

Loads of stuff on ebay now, some ending within the hour!!

Leather wheel, load cover, suspension, brakes, beam, bumper, doors, lights, wipers, dash, clocks, switches, climate panel, interior plastics etc etc. Big Grin

http://www.ebay.co.uk/sch/toms14292/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686


RE: Breaking - China 306 Meridian Estate!! - Connor - 02-04-2013

Might have the hubs off you Tom, they're not ovaled?


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 02-04-2013

Not sure how I'd check if they're ovalled?

I posted your knob today btw. Smile


Also....if anyones interested in the load cover theres like 10 mins left.....its mint as well! Big Grin


RE: Breaking - China 306 Meridian Estate!! - Connor - 02-04-2013

Well is it still circular? Lol price for both?


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 02-04-2013

I dunno, didn't look tbh. Tongue. Will it be blatently obvious if they're not perfectly round now then? I thought it might have been like trying to work out disc runout by eye.... lol

I'll have a look tomorow though lol, and sort a price then as well.


Breaking - China 306 Meridian Estate!! - Joe205 - 03-04-2013

How much for fuel tank?would you courier? Desperate for one


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 03-04-2013

I could courier it I guess, just in pallet wrap though as it take about a mile of bubblewrap otherwise lol.

Will have to get dimensions and weight later today and see how much the price would be though, if they'll even take stuff that big.


Breaking - China 306 Meridian Estate!! - Joe205 - 03-04-2013

Where abouts are you to collect? Is the sender unit still in the tank?


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 03-04-2013

In Ipswich, IP9 mate.

Yep the lift pump is still in there....exactly as in the pic. Smile


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 03-04-2013

Big Grin

[Image: Breaking3065023_zps85fd43ea.jpg]

[Image: Breaking3065024_zps2dfe8be8.jpg]

[Image: Breaking3065025_zps0ce73f0b.jpg]

[Image: Breaking3065026_zpsa27ef749.jpg]

[Image: Breaking3065027_zps2af61881.jpg]

So head, sump, rods/pistons, fuel pump and rail coming off tomorow if your after any of those.... Smile


RE: Breaking - China 306 Meridian Estate!! - ashkid - 04-04-2013

have you got the rear boot side panels?


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 04-04-2013

The parts that open? Or the solid parts?


RE: Breaking - China 306 Meridian Estate!! - DeeTurbo - 04-04-2013

I need the bleed nipple thats on the pipe that goes to the heater matrix, do you still have that?


RE: Breaking - China 306 Meridian Estate!! - ashkid - 04-04-2013

parts that open


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 04-04-2013

(04-04-2013, 08:57 PM)DeeTurbo Wrote: I need the bleed nipple thats on the pipe that goes to the heater matrix, do you still have that?

Umm, should do, I didn't realise the nipples were separate from the pipes themselves tbh. I 'think' I know where the rad hoses are so I'll check tomorow for you. Smile

(04-04-2013, 09:12 PM)ashkid Wrote: parts that open

Ah ok, those are saved for SRowell atm, sorry.

Right, stripped engine down today - parts available -

Complete head (minus rail and injectors) - £50+postage

[Image: Breaking3066026_zps524e908b.jpg]

[Image: Breaking3066027_zps054fe699.jpg]

HDi rods and pistons £50 couriered. Crankshaft £50 couriered. Oil cooler £25 posted -

[Image: Breaking3066032_zps4f7ddd8b.jpg]

HDi gearbox - £50 collection only (unless you know of a courier that takes something as heavy as a 'box)

[Image: Breaking3066030_zps80992a2f.jpg]


Breaking - China 306 Meridian Estate!! - Joe205 - 05-04-2013

Any news on tank posted ?


RE: Breaking - China 306 Meridian Estate!! - Connor - 05-04-2013

Tom can you pm me my tracking no. please


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 05-04-2013

(05-04-2013, 04:02 PM)Joe205 Wrote: Any news on tank posted ?

Err...no. You asked where I was but didn't reply so I assumed you were no longer interested. I'll have a look tomorow.

(05-04-2013, 04:29 PM)Connor Wrote: Tom can you pm me my tracking no. please

It was posted royal mail, as you didn't want Hermes. Tongue. Was only 2nd class though as they'd changed postage prices.


RE: Breaking - China 306 Meridian Estate!! - Connor - 05-04-2013

So no tracking number..?


RE: Breaking - China 306 Meridian Estate!! - Toms306 - 05-04-2013

Don't think so? Do royal mail do tracking as standard?