+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 (/showthread.php?tid=170)
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Toms306 - 09-12-2014
Those wheels are awful tbf...even without a close up of the paint! You must have a spare set of 'clones lol!
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Matt-Rallye - 09-12-2014
That makes him a lady garden then. end off
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Eeyore - 09-12-2014
(09-12-2014, 10:00 AM)Toms306 Wrote: Those wheels are awful tbf...even without a close up of the paint! You must have a spare set of 'clones lol!
Problem is...
Shadow Chrome Cylcones - Need a rainsport 2 as one blew out.
Fondmetals - Need a PS3 as one blew out.
Cyclones - Need refurbishing.
Orguans - Need binning and tyres sold.
Wolfrace Dragons - Need binning and tyres sold.
So I have got enough wheels but most sets are crap and the good ones are one tyre short of being usable!
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Toms306 - 09-12-2014
Tbh the Dragons would've been an improvement over the Ouragons!
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - procta - 09-12-2014
just drop it on wide steelies
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Eeyore - 09-12-2014
(09-12-2014, 11:30 AM)procta Wrote: just drop it on wide steelies
or not! Wont be buying any new wheels before 3 dooring!
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Dum-Dum - 09-12-2014
C5 steels [/thread]
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Niall - 09-12-2014
(09-12-2014, 09:20 AM)Matt-Rallye Wrote:(08-12-2014, 11:20 PM)SRowell Wrote:(08-12-2014, 11:18 PM)7057sam Wrote: I actually prefer these to the fondmetals
Think of all the brake possibilities
are you blind? These have been brushed painted white and are kurbed to hell. Seller was a massive liar and I never did get the spacers I was promised. VAUGHAN I will get money out of you for those spacers especially seeing as you sold them to Grant.
I dont know where the fondmetals will go. Ideally I want big brakes on the 1.8. Itll probably end up on silver TD 1.2s and the fondmetals will go on the estate.
So let me get this straight..
You name and shame one of the old forum bummers as a rip off merchant..
And no-one bats an eyelid?standard forum procedure!
I've always said and will say it again, we take no liability with sales. Of course we will try and help where possible but this was before my time as admin.
Rowells a big boy, he can contact Vaughan and I know he's tried to several times just be ignored. Just goes to show you don't know some people as well as you may think!
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Matt-Rallye - 10-12-2014
(09-12-2014, 02:51 PM)Niall Wrote:(09-12-2014, 09:20 AM)Matt-Rallye Wrote:(08-12-2014, 11:20 PM)SRowell Wrote:(08-12-2014, 11:18 PM)7057sam Wrote: I actually prefer these to the fondmetals
Think of all the brake possibilities
are you blind? These have been brushed painted white and are kurbed to hell. Seller was a massive liar and I never did get the spacers I was promised. VAUGHAN I will get money out of you for those spacers especially seeing as you sold them to Grant.
I dont know where the fondmetals will go. Ideally I want big brakes on the 1.8. Itll probably end up on silver TD 1.2s and the fondmetals will go on the estate.
So let me get this straight..
You name and shame one of the old forum bummers as a rip off merchant..
And no-one bats an eyelid?
I've always said and will say it again, we take no liability with sales. Of course we will try and help where possible but this was before my time as admin.
Rowells a big boy, he can contact Vaughan and I know he's tried to several times just be ignored. Just goes to show you don't know some people as well as you may think!
Think i should explain:
My post wasnt aimed directly at the forum staff or the forum itself, more at a slight clique of older members, Most of which seem to of moved on thankfully.
I know rowells a big boy
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - lolsteve - 10-12-2014
He certainly is
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Eeyore - 10-12-2014
(10-12-2014, 12:39 PM)lolsteve Wrote: He certainly is
Im not fat! Shut up everyone!
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Matt-Rallye - 10-12-2014
You are abit podgy though....
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Eeyore - 10-12-2014
(10-12-2014, 01:22 PM)Matt-Rallye Wrote: You are abit podgy though....
shut up
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Niall - 10-12-2014
There right....
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Eeyore - 10-12-2014
(10-12-2014, 01:33 PM)Niall Wrote: There right....
unlike your spelling.... everyone shut up.
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - 7057sam - 10-12-2014
All them frank and bennys finally catching up with you
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - lolsteve - 16-12-2014
I wasn't on about him being fat..
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Seid' - 17-12-2014
What specs for the fondmetal's mate?
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - 7057sam - 17-12-2014
Fondmetal 4000 ET11 15x7J
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Eeyore - 17-12-2014
(17-12-2014, 12:33 AM)7057sam Wrote: Fondmetal 4000 ET11 15x7J
Exactly this. They originally came off a ford capri! Difficult to find in the UK and i presume the rest of the world. They are a decent fitment straight out of the box without spacers but they wont clear 266mm brakes. Mine do with spacers, ground down callipers and being the special type of calliper.
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Seid' - 17-12-2014
maybe yes because of the offset... e have used my 266 with my old bbs rj 14" et22 but the design its different of course.
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Eeyore - 17-12-2014
(17-12-2014, 11:13 PM)Seid Wrote: maybe yes because of the offset... e have used my 266 with my old bbs rj 14" et22 but the design its different of course.
its the thickness of the rims. These are very thick and there is only a few mm clearance. Its not just offset.
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Eeyore - 18-12-2014
So not much work at the moment so I made a start today on the 3D models of the fondmetal centre caps. I keep losing them and you cant buy them any more so making a model myself and getting them 3d printed for £10 or so each will do the trick!
With my lack of 3D modelling skills and finding/installing 123D Design it has taken me about 3 hours to do. Of course im not going to go to all this effort without any credit so ive stuck my name on the model!I have designed these to be identical to the original ones but with improvements. There are 6 prongs not 4. All the prongs have been moved out slightly with the bulge enlarged. This should result in a tighter fit and can always be sanded down if needed.
![[Image: Capture1_zps937d1518.png]](http://i1184.photobucket.com/albums/z327/srowell3/Capture1_zps937d1518.png)
![[Image: Capture2_zps9f1c8898.png]](http://i1184.photobucket.com/albums/z327/srowell3/Capture2_zps9f1c8898.png)
View in 3D here: https://skfb.ly/Cq8z
Ive ordered 4 of them for £37 delivered in the next 10 working days. Which will probably be early January in reality! They will be printed in the ABS plastic but on shapeways you can also get other materials including metal. Fingers crossed they fit okay and this is the start of me making things for the 306!
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - lolsteve - 19-12-2014
Nicee , been looking into 3d printing. Wanted to design a new rocker cover as surprisenly a 1980 s engine looks a bit dated .
Seems quite expensive for such a small shape even though there's 4
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - procta - 19-12-2014
good piece of design work!
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Eeyore - 20-12-2014
Cheers. As I say it took 3 hours from installing the software to actually ordering them. Hopefully the material will be strong enough to do the job!
No update on this really...I snapped one of my flocked sunvisors and put in a billion pounds more petrol... Standard.
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - lolsteve - 21-12-2014
At least petrol prices have dropped alot
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - 7057sam - 21-12-2014
Sam do you have a shell card?
May save you a few pounds?though I highly suspect you have to spent £500 or fuel to get a free sausage roll
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - procta - 21-12-2014
sam I think you should take toms 306 gti off him and rebody your bit setup, f*ck the colour!
RE: SRowells Diablo 1.8 - Jenvey 45s & OMEX600 - Toms306 - 21-12-2014
Its a good point really....even comes with a good GTi beam (rare these days!) and a decent '6 head. Could sell the bottom end and gearbox, ripped seat doesn't matter as he's got buckets... It's up to Sam though, and theres not much point making his ideal car if its the wrong colour, colour makes more difference than you think tbh.