![]() |
Sams astor 6 new shoes!! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Sams astor 6 new shoes!! (/showthread.php?tid=11812) |
RE: sam ' s astor 6 being re shelled ;) - sam - 10-06-2014 The reshell has started ![]() sam ' s astor 6 being re shelled ;) - rocker8742 - 10-06-2014 Good to see you on Saturday man will look good once it's all finished RE: sam ' s astor 6 being re shelled ;) - sam - 10-06-2014 Yeah same dude was good to see you chap, and fingers crossed it'll be mot'd by the end of the day ![]() RE: sam ' s astor 6 re shelled has begun - ozonehostile - 10-06-2014 Nice to see you at fcs :-) Interested to see what you do with this one, your cars usually end up with some nice bits haha RE: sam ' s astor 6 re shelled has begun - sam - 10-06-2014 Yeah same dude! Haha hopefully chap got a few things up my sleeve that I want todo but in no rush as I want to take my time on the one RE: sam ' s astor 6 re shelled has begun - Leemus - 10-06-2014 give you week till you change your mind what you are doing to it.... ha RE: sam ' s astor 6 re shelled has begun - sam - 10-06-2014 Haha ![]() RE: sam ' s astor 6 re shelled has begun - procta - 10-06-2014 get your finger out sam! i bet your not going as hard core as me! have a look at my thread! RE: sam ' s astor 6 re shelled has begun - sam - 11-06-2014 Probably not dude haha going to take it slow on this one ![]() RE: sam ' s astor 6 re shelled has begun - Piggy - 11-06-2014 To be fair, I think Proctas is the fastest reshell ever. But it is half the size of a 306 and everything was perfect thats being swapped over!! And its a rover. RE: sam ' s astor 6 re shelled has begun - sam - 11-06-2014 Yeah true that dude RE: sam ' s astor 6 re shelled has begun - mr_fish - 11-06-2014 severe lack of photos sam!! RE: sam ' s astor 6 re shelled has begun - sam - 11-06-2014 Haha will put some up once I get it home dude RE: sam ' s astor 6 re shelled has begun - sam - 11-06-2014 pictures as promised: the new shell ![]() old and new together ![]() ![]() ![]() ![]() ![]() ![]() ![]() and all back in the new shell!!!! ![]() ![]() ![]() next on the list is disks and pads all round ready for the mot on Tuesday ![]() RE: sam 's astor 6 - Piggy - 11-06-2014 wow....quick turn around...how long did it take in all?? Thats impressive mate...you happy? is the new shell good, it looks it by the few pics ![]() How do you rate the AVO 40mm springs?? I use GTI6 springs due to similar front axle weight, but the front end is too soft so Im looking into other options inc b6/b8 dampers but not sure on springs and dont wana sit low RE: sam 's astor 6 - sam - 11-06-2014 I'm on 40 mm spacers springs and spa shocks at the moment, but speaking to coling about b8 ( as there 20mm shorter and alot more stiffer ) using a 40 mm 350 lbs spring will lower it around 60mm which is what I want but tbh I haven't driven it yet so I wouldn't no haha taken roughly 2 days I think, big thanks to Colin and james RE: sam 's astor 6 - procta - 11-06-2014 sam you call that a reshell??? id say that's just an engine swop ![]() you want to be hard! get the full works pulled out and put back in, that's everything! electrics and fuel and running gear! ![]() (11-06-2014, 07:15 AM)Piggy Wrote: To be fair, I think Proctas is the fastest reshell ever. I don't hang about hahaha! RE: sam 's astor 6 - sam - 12-06-2014 Haha well its only like this for the Mot still got to fit my beam and my coilovers etc haha RE: sam 's astor 6 - sam - 12-06-2014 Haha well its only like this for the Mot still got to fit my beam and my coilovers etc haha RE: sam 's astor 6 - Piggy - 12-06-2014 So you using coilover springs on a standard type Bilstein damper?! RE: sam 's astor 6 - mr_fish - 12-06-2014 nice looking replacement sam! tidy base to make it what you want again! are you stripping your old one bare and scrapping then? RE: sam 's astor 6 - sam - 12-06-2014 (12-06-2014, 07:06 AM)Piggy Wrote: So you using coilover springs on a standard type Bilstein damper?! No using lowering springs dude I'mselling the coilovers, using avo lowering springs and bilstien dampers (12-06-2014, 09:37 AM)mr_fish Wrote: nice looking replacement sam! tidy base to make it what you want again! Cheers dude, kind of stripping my bits off it and then Colins selling the rest as that's the deal we both agreed on RE: sam 's astor 6 - Tom - 12-06-2014 Glad it went well, looks good bud, i have been following on fb :p RE: sam 's astor 6 - sam - 12-06-2014 ![]() ![]() RE: sam 's astor 6 - ozonehostile - 13-06-2014 Looks real nice man. Out of curiosity, is it a darker shade of astor than your other one? I know it's Peugeots favourite thing to do with paint, there's 2 shades of black ffs ![]() RE: sam 's astor 6 - sam - 13-06-2014 Yeah it is chap my other one is quite a bit lighter ![]() RE: sam 's astor 6 - procta - 16-06-2014 (12-06-2014, 06:45 AM)sam Wrote: Haha well its only like this for the Mot still got to fit my beam and my coilovers etc haha get all swopped over ![]() RE: sam 's astor 6 - sam - 16-06-2014 Haha well picking them up tomorrow so hopefully it'll be alot better looking soon ![]() RE: sam 's astor 6 - sam - 16-06-2014 Mini update popped into work today to replace disks and pads all round as they barley needed doing! Got a tad confused as on the last mot the front disks were advised, which was seen quite clearly, the thing that confused me was the owner before brett put brand new pads on very very f***** disks :/ anyway I order mtec grooved disks and minter pads all round ![]() ![]() RE: sam 's astor 6 - Eeyore - 17-06-2014 Good progress mate. Hope youre happy with it after all your hard work. |