306oc - Peugeot 306 Owners Club & Forum
NSF HEAVY suspension clonk/knock - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: NSF HEAVY suspension clonk/knock (/showthread.php?tid=32360)

Pages: 1 2 3


RE: NSF HEAVY suspension clonk/knock - Niall - 03-11-2015

https://youtu.be/RfK8f5Q3sd0

Skip to 40 wish seconds - 1 minute and you can hear mine. Is that what yours is like piggy?


RE: NSF HEAVY suspension clonk/knock - PUGNUT_XS - 03-11-2015

Its getting to the point, im going to drop the N/S Suspension off and rebuild it again, bloody frustrating.Angry


RE: NSF HEAVY suspension clonk/knock - Piggy - 03-11-2015

(03-11-2015, 04:31 PM)Niall Wrote: Skip to 40 wish seconds - 1 minute and you can hear mine. Is that what yours is like piggy?

yeah does sound similar. 

Often I get at least two heavy "clicks" when pulling away though.

(03-11-2015, 05:05 PM)PUGNUT_XS Wrote: Its getting to the point, im going to drop the N/S Suspension off and rebuild it again, bloody frustrating.Angry

see...

I've done that lol


RE: NSF HEAVY suspension clonk/knock - cully - 03-11-2015

NS chassis rail is cracked around the gearbox mount captive nuts?


RE: NSF HEAVY suspension clonk/knock - Piggy - 03-11-2015

(03-11-2015, 08:04 PM)cully Wrote: NS chassis rail is cracked around the gearbox mount captive nuts?

not been able to look at that yet.

I STILL have yet to lift the engine off its mounts to check them all.

This I plan to do friday.

Plan is...hoist engine up. blocks under for safety.

Remove all mounts and inspect.


RE: NSF HEAVY suspension clonk/knock - Gaz85 - 11-12-2015

Got the same noise on mine to, a clunk when pulling off and under heavy braking and sometimes over bumps also sometimes changing up under heavy load. it's been to three garages and they can find anything wrong, i am exhausted with it now, everything has been changed shocks,springs,spring cups,droplinks,ball joints,bottom arms,arbs,arb clamps, all bolts/nuts. :-(


RE: NSF HEAVY suspension clonk/knock - Piggy - 11-12-2015

Mine turned out to be a FG bonnet lmao


NSF HEAVY suspension clonk/knock - zx_volcane - 11-12-2015

(11-12-2015, 06:53 AM)Piggy Wrote: Mine turned out to be a FG bonnet lmao

Ffs, least you finally tracked it down!


RE: NSF HEAVY suspension clonk/knock - Piggy - 11-12-2015

Aye...hence the bonnet raisers to see if it was

They won't be staying...just a test procedure