![]() |
The E30 Track car - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: Photos Of Members / Cars (https://www.306oc.co.uk/forum/forumdisplay.php?fid=15) +--- Thread: The E30 Track car (/showthread.php?tid=2281) |
Re: The E30 Track car - Dan! - 08-05-2012 Its got a stainless powerflow exhaust which sounds pretty good imo, has a lovely old skool engine purr too ![]() You gonna have your camera? Il have mine but it will be in the car recording the track driving so wont get any photos ![]() Re: The E30 Track car - Ben Jay - 08-05-2012 Carlos182 Wrote:Interesting to see how that diff turns out too... haha! ![]() Like this ![]() Re: The E30 Track car - C.A.R. - 08-05-2012 Looks like a lot of fun ![]() Can you not get a LSD from an M3 or does nothing line up correctly? I thought that by having an open diff on track then the car might be harder to catch if you should find yourself in a bit of a slide? Re: The E30 Track car - Dan! - 08-05-2012 Yeah an LSD should fit no problem, but a normal old / non-refurbed LSD from the E30 sport models is £300+, which is too much at the moment. Its something we'l be buying in a few months though. And the welded diff made it a bit of a nightmare to control round fast corners. You basically either had to go round slowly or sideways ![]() Re: The E30 Track car - C.A.R. - 08-05-2012 Yea always used to wind me up when people just welded the LSDs on the MX5 forums. WHYY!!? makes it very twitchy and unpredictable on the public highway, which can't be good for your trousers... Re: The E30 Track car - silverzx - 08-05-2012 Dan! Wrote:You basically had to go round sideways Win. :auto-iroc: Re: The E30 Track car - Poodle - 08-05-2012 Really can't wait to see this at PPC, just remember to put some fuel in it this time. ![]() Re: The E30 Track car - 4WayDiablo - 08-05-2012 silverzx Wrote::auto-layrubber: more winDan! Wrote:You basically had to go round sideways Re: The E30 Track car - procta - 20-05-2012 you had some fun with this yet? The E30 Track car - Jake - 20-05-2012 procta Wrote:you had some fun with this yet? Check the PPC pics thread! Re: The E30 Track car - ginge191 - 20-05-2012 How was it round the track Dan!? i've seen the pics but it doesnt say much about the car itself ![]() RE: The E30 Track car - C2K - 16-12-2012 Has this gone anywhere since this thread? Love old skool E30's, may well make one my next project. If the mrs wants to move to South Africa then it's going to be an old skool BMW project with overnight parts from Europe. Nothing rusts here! RE: The E30 Track car - GTI 6 - 06-01-2013 Loving the e30 dan if ever you decide to sell the rims be sure to give me a shout as they would look awesome on my 325i sport RE: The E30 Track car - procta - 13-01-2013 (16-12-2012, 01:17 PM)C2K Wrote: Has this gone anywhere since this thread? never heard anything more either, The E30 Track car - Jake - 13-01-2013 It's currently covered in mould hahah There is stuff happening, just not stuff worth updating at the moment.. But by the looks of it there will be some update to this in the near future ![]() RE: The E30 Track car - Andy325i - 22-02-2013 Nice work. Did I see somewhere its an M20B25? M52B28's are a nice improvement ![]() ![]() Keep up the good work ![]() Andy Re: The E30 Track car - Dan! - 22-02-2013 Yeah its a 2.5, we have considered an engine change but decided its not worth it, it really is a budget motor and the 2.5 does drive well so it will do :-) Quite a bit to update on this soon, polycarb windows, coilovers, lots of weight removed and general clean up of the engine bay/dash etc. Will get some photos and do a proper write up soon :-) RE: The E30 Track car - Andy325i - 22-02-2013 Awesome keep it coming ![]() RE: The E30 Track car - Dan! - 05-03-2013 Yeah im on there Andy, but dont use it much unless I have an E30 specific problem. The Wiki on there is really helpful! Anyway, time for an update! Its been in the garage a lot over winter for a bit of a makeover. Stripped around 60kg more weight out of it (Front bumper insert, windows/motors, dash, wiring, sound deadening, rear spoiler and bonnet hinge/strut/release) And also got some extended rear arches and some coilovers. The rear arches took a bit of cutting, trimming and test fitting but they are on now and serve their purpose well, no more scrubbing tyres. The coilovers are only FK cheapies but in comparison to the worn out standard shocks and ancient 40mm springs they are much stiffer and have dropped the car nicely, body roll was a big issue before but that should be sorted out now. Going to pull the height adjuster plates out of the rear soon to drop it another 10mm. Also got some polycarbonate sheet and made up front and rear side windows, easy enough and saved around 15kg overall. Few photos I got when it was outside the other day. Bonnet currently off while we fit bonnet pins but other than that its in its 'finished' state ready for summer. ![]() The BMW by Daan!, on Flickr ![]() The BMW by Daan!, on Flickr ![]() The BMW by Daan!, on Flickr ![]() The BMW by Daan!, on Flickr ![]() The BMW by Daan!, on Flickr ![]() The BMW by Daan!, on Flickr ![]() The BMW by Daan!, on Flickr Also, front wheels are hideous, I know! But they were cheap and came with some fairly decent Yoko Paradas on, so they are staying until the tyres are polished off ![]() RE: The E30 Track car - Dum-Dum - 05-03-2013 Shes looking good mate. The E30 Track car - vlj - 05-03-2013 Looks so good! RE: The E30 Track car - puglove - 05-03-2013 What f*cking cowboy done this ?? ![]() The E30 Track car - Jonny b - 05-03-2013 Ha ha never noticed the wheel bolt lfmao! RE: The E30 Track car - darrenjlobb - 05-03-2013 Lol that diff wont last 5 minutes, ive welded a few field car ones over the years and found you have gotta weld them seriosuly solid to stop them breaking free, and thats not on tarmac! ![]() RE: The E30 Track car - Birk - 05-03-2013 That weld doesn't look like it hold a cold, let alone a drift lol I welded the diff on my 328 because it was the easiest option at the time, I did a much better job than that haha The E30 Track car - Jake - 05-03-2013 That was how it was hen he bought it.... It has been sorted since. RE: The E30 Track car - darrenjlobb - 05-03-2013 Ah thank fook! RE: The E30 Track car - Dan! - 05-03-2013 Here you go Darren, you'll love this! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() It's done over 1000 miles since like that, doesnt whine or grind, seems fine ![]() RE: The E30 Track car - darrenjlobb - 05-03-2013 haha you hero ![]() RE: The E30 Track car - strictly_perv - 05-03-2013 Love that bodge weld there. My mates welded up a diff on a E46 318 estate wagon with an arc and it was welded so strong that the stress of having a welder' actually ripped the subframe from the chassis from drift abuse ![]() Epic car though Dan, shame I didn't know you had a welder on it as a mate had sold his E30 LSD not long ago. |