+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: LDA pins, Injector refurbs, Pump mods blah blah (/showthread.php?tid=6719)
RE: LDA pins, Injector refurbs, Pump mods blah blah - Frosty - 07-10-2012
ok mate when you get sort i will be after 1 cheers
RE: LDA pins, Injector refurbs, Pump mods blah blah - ally406 - 09-10-2012
Hi, new guy here. I have a 406 but have read a lot on this forum and others about the LDA mod. I'm after a ground pin, if you can help Dan? I can't PM you, presumably due to my low post count. Cheers.
Re: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 09-10-2012
Hi Ally, yeah that should be fine. Do you want a ground pin sent to you (£20) or would you want to send me your pin, have it ground and then returned to you? (£13).
Thanks.
RE: LDA pins, Injector refurbs, Pump mods blah blah - Jonny81191 - 09-10-2012
Did you get a price on refurbing my injectors mate?
RE: LDA pins, Injector refurbs, Pump mods blah blah - ally406 - 09-10-2012
If you could send me an already ground pin, that would be great! Perhaps you can PM me you email address and we can get something sorted out.
Re: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 09-10-2012
Sorry Jonny, busy couple of days. I'll check the prices tomorrow for you x
Ally, sounds good man. PM incoming.
Edit, Okay, your PM system is totally disabled at the moment. I'll put my email below and once you have seen it let me know and I'll edit it out.
danhargrave at live.co.uk
LDA pins, Injector refurbs, Pump mods blah blah - dturbopeck - 09-10-2012
Can u grind pins yet, as I can send 1 to u if so?
Re: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 09-10-2012
I should be able to start doing pins this weekend and injectors/pumps soon after that. I'll pm my address and PayPal to all of you tomorrow :-)
RE: LDA pins, Injector refurbs, Pump mods blah blah - zx_volcane - 09-10-2012
Yay, now where did I put my spare set of injectors ...
LDA pins, Injector refurbs, Pump mods blah blah - dturbopeck - 09-10-2012
Thanks
RE: LDA pins, Injector refurbs, Pump mods blah blah - ally406 - 11-10-2012
I just noticed that I can't access the messages yet (low post count). If you've sent me a PM I won't be able to access it. If you don't mind forwarding it to evilally at hotmail dot com that would be great.
RE: LDA pins, Injector refurbs, Pump mods blah blah - David - 15-10-2012
Dear Dan!
I would very very VERY much like to book my car in with you as the bloody thing used an extra quater of a tank getting back to camp then i normally does
Hoping your ok
David Mowle
LDA pins, Injector refurbs, Pump mods blah blah - dturbopeck - 19-10-2012
Just received my LDA pin back from Dan, can say he's done a great job! I will send my injectors to you next month wen I have funds!
Cheers Dan!
RE: LDA pins, Injector refurbs, Pump mods blah blah - CJ_Derv - 19-10-2012
Got my pin today aswell Dan nice one buddy
RE: LDA pins, Injector refurbs, Pump mods blah blah - CJ_Derv - 19-10-2012
Reasons for griding original LDA pin as to making your own...
![[Image: 20121019_161125.jpg]](http://i1207.photobucket.com/albums/bb466/CJ_306/20121019_161125.jpg)
this was a custom made pin, the problem is that it is extremely difficult to get a hardening process correct....or should i say as good as original item. It is a shame as it worked a treat for a perios of time but just wasnt hard enough
CJ
RE: LDA pins, Injector refurbs, Pump mods blah blah - karl1989 - 19-10-2012
this the pin from the RR meet. looks paggerd. were you get it from
RE: LDA pins, Injector refurbs, Pump mods blah blah - zx_volcane - 19-10-2012
I have a pin that looks like that :/
(19-10-2012, 03:22 PM)CJ_Derv Wrote: Reasons for griding original LDA pin as to making your own...
this was a custom made pin, the problem is that it is extremely difficult to get a hardening process correct....or should i say as good as original item. It is a shame as it worked a treat for a perios of time but just wasnt hard enough
CJ
RE: LDA pins, Injector refurbs, Pump mods blah blah - CJ_Derv - 19-10-2012
Got it off a good mate a while ago, but now got dans pin in and made a huge difference as its not getting stuck
Re: LDA pins, Injector refurbs, Pump mods blah blah - Tyronnster - 19-10-2012
gutted you so far need a pump change
Re: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 24-10-2012
First set of injectors done for zx_volcane.. :-)
RE: LDA pins, Injector refurbs, Pump mods blah blah - CJ_Derv - 24-10-2012
^^^Shiney bits
RE: LDA pins, Injector refurbs, Pump mods blah blah - Dave - 24-10-2012
Can you get uprated tips dan? This would be HELLISH epic if you could!!
RE: LDA pins, Injector refurbs, Pump mods blah blah - CJ_Derv - 24-10-2012
(24-10-2012, 09:57 AM)Dave Wrote: Can you get uprated tips dan? This would be HELLISH epic if you could!!
was thinking this also
RE: LDA pins, Injector refurbs, Pump mods blah blah - zx_volcane - 24-10-2012
Shiny indeed
(24-10-2012, 08:34 AM)Dan! Wrote: First set of injectors done for zx_volcane.. :-)
LDA pins, Injector refurbs, Pump mods blah blah - dturbopeck - 24-10-2012
What's the turn around time on injectors?
Re: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 24-10-2012
I can get in any nozzles/tips that you want, although its not as easy as just phoning up to order them and asking for uprated ones, id have to research which tips would fit and if/how much they would flow higher. Id like to do this but its not something iv done yet, Toms nozzles are an upDATED version of standard nozzles, 299c's instead of original 299's, but afaik they are just updated oem, not higher flow...
Turn around time, if you post them first class they will be with me next day, i can then refurb them and send them back first class the next day. So for example if you post them monday, il get them tuesday, refurb them tuesday night, send them back wednesday and they should be with you thursday.
Thats for a standard refurb with no new nozzles, just stripped cleaned etc. If you want new nozzles youd have to allow an extra day for delivery of nozzles.
Cheers.
RE: LDA pins, Injector refurbs, Pump mods blah blah - bayley - 24-10-2012
my pump and injectors should be with you today mate...cash inside -_-
Re: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 24-10-2012
Goodo cheers mate. Got a text from my stepmum earlier saying i have 2 parcels at home, should be one of them i reckon! :-)
RE: LDA pins, Injector refurbs, Pump mods blah blah - bayley - 24-10-2012
hope so,can't wait dan to get it all on.gonna be busy when it comes back...got gmax superstrut gas dampers plus need to lower the torsion,gmax 60mm front springs,oil return pipe,td04l turbo,adapter plate,cambelt kit,glow plugs,pump,lines and injectors to put on -_-
RE: LDA pins, Injector refurbs, Pump mods blah blah - Dave - 24-10-2012
If you can get hold of uprated injectors that would be brilliant, and I'm sure you'de get some excellent business too...