309 TD - Printable Version

309 TD - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: 309 TD (/showthread.php?tid=3901)

Pages: 1 2 3

309 TD - Sambarker - 28-06-2012

More goodies arrived today

[Image: dd5e3c6c.jpg]

Thats my Friday evening sorted

RE: 309 TD - HDIkyle - 29-06-2012

Shiney (black) goodness

RE: 309 TD - Sambarker - 22-07-2012

Tidied my garage out so i could get the car in while im on holiday

painted the inner lamps yellow, not sure im keen on it tbh

[Image: P1000628.jpg]

Randomly, ended up with a berlingo van which im now breaking.

[Image: P1000625.jpg]

Got these goodies off for myself

14" steels, which may or may not be getting banded

[Image: P1000626.jpg]

and almost brand new 266mm brake set up and master cylinder. should be a nice upgrade over my 247's

[Image: P1000627.jpg]

RE: 309 TD - strictly_perv - 22-07-2012

Good stuff. I'm running 266's and they stop bloody well in a light car. Same wheels as mine too except mine are banded.

309 TD - Sambarker - 24-07-2012

Ordered my front mount, was a steal at £50 posted brand new. It's only a baby, but I don't want to get too chop happy with my front end. Plus will try and reduce lag. Just a shame the inlets are 3" as I'm only planning on running 2.25" pipes.

Filename: ImageUploadedByTapatalk1343145754.794189.jpg Size: 29.83 KB 24-07-2012, 04:02 PM

Update on plans:

1. Get spare rear axle rebuilt and lowered
2. Get spare engine rebuilt with hdi rods
3. Fit new head gasket and new head, updated head studs
4. Swap turbo over, xantia inlet and Fmic
5. 11mm frankenpump
6. Coilovers on the front, or perhaps slightly lower springs
7. Possibly banded Berlingo steels with Berlingo centers and 185/55/14 tyres
8. Berlingo 266 front brake setup
9. New heater matrix and plumb it in ready for winter
10. Carbon wrap the spare bonnet, possibly grill too or at least Matt black it
11. Would like some new reclineable buckets
12. Custom 2.5" or 3" stainless straight through with possibly fake rear box depends how much I care.

Hopefully all this done by next FCS!

RE: 309 TD - Ruan - 24-07-2012

I thought you were all over the Mambas iirc?

309 TD - Sambarker - 24-07-2012

(24-07-2012, 04:10 PM)Ruan Wrote: I thought you were all over the Mambas iirc?

The mambas are shagged!

RE: 309 TD - Ruan - 25-07-2012

Boooo!

309 TD - Sambarker - 26-07-2012

Right, don't know why but I've mounted my intercooler tonight. Not actually plumbed in but it will be shortly.

Some pics during and after:

Filename: ImageUploadedByTapatalk1343332634.176619.jpg Size: 72.24 KB 26-07-2012, 07:57 PM

Filename: ImageUploadedByTapatalk1343332645.551201.jpg Size: 104.09 KB 26-07-2012, 07:57 PM

Filename: ImageUploadedByTapatalk1343332655.933778.jpg Size: 97.09 KB 26-07-2012, 07:57 PM

Filename: ImageUploadedByTapatalk1343332670.215930.jpg Size: 81.25 KB 26-07-2012, 07:57 PM

Filename: ImageUploadedByTapatalk1343332681.385014.jpg Size: 71.44 KB 26-07-2012, 07:58 PM

Had to modify a spare front panel

Filename: ImageUploadedByTapatalk1343332693.673126.jpg Size: 78.88 KB 26-07-2012, 07:58 PM

Filename: ImageUploadedByTapatalk1343332722.361692.jpg Size: 71.02 KB 26-07-2012, 07:58 PM

Had a mess about with a spare grill. Not keen tbh

Filename: ImageUploadedByTapatalk1343332737.732852.jpg Size: 74.12 KB 26-07-2012, 07:58 PM

Original grill looks better

Filename: ImageUploadedByTapatalk1343332790.066605.jpg Size: 71.43 KB 26-07-2012, 07:59 PM

Filename: ImageUploadedByTapatalk1343332843.118659.jpg Size: 64.48 KB 26-07-2012, 08:00 PM

309 TD - Sambarker - 29-07-2012

I think my plans are changin for this car now, I'm thinking on returning the outside appearance of the car to as close to standard as possible, with the exception of a little bit of lows, but obviously still going all out with the engine mods.

Thinking factory wheel trims on the Berlingo steels so I can have bigger front brakes, but thinking of ditching the gti kit and going back to base spec for the sleeper look!

RE: 309 TD - Sambarker - 16-08-2012

Start of the stealth look

[Image: D11385B3-0193-4D44-B14A-73D3A38DF058-628...5EDFCF.jpg]

[Image: 9DAD8817-C9F8-4F1E-A6C6-08BCF6DCC47B-628...852037.jpg]

RE: 309 TD - Mattcheese31 - 16-08-2012

i like the idea mate . . . Smile

RE: 309 TD - Sambarker - 16-08-2012

just wish i could lower the back Sad

309 TD - Sambarker - 22-08-2012

Head gasket issues really becoming a concern now

Filename: ImageUploadedByTapatalk1345663433.082603.jpg Size: 150.43 KB 22-08-2012, 07:23 PM

Drastic measures to keep engine cool until spare engine is ready

Some new 12 inch fans

Filename: ImageUploadedByTapatalk1345663474.390815.jpg Size: 197.03 KB 22-08-2012, 07:24 PM

And some choice bumper mods

Filename: ImageUploadedByTapatalk1345663494.337706.jpg Size: 187.78 KB 22-08-2012, 07:24 PM

Hopefully can get another few months out of it!

Oh and its booked in with Rickyp next Friday hopefully so he can lower the back!

RE: 309 TD - Jenkosowls - 22-08-2012

Yes it does get a bit hot rather quickly!

RE: 309 TD - strictly_perv - 22-08-2012

Looking good. Bet that will shock a few people looking like it does.
Are you interested in that 205 box?

309 TD - Sambarker - 22-08-2012

I am interested but your miles away!

RE: 309 TD - strictly_perv - 22-08-2012

(22-08-2012, 08:22 PM)Sambarker Wrote: I am interested but your miles away!

I just did a quick quote on interparcel and got one for £18 delivered

P.M me if you want to sort something out.

RE: 309 TD - gumball3000 - 23-08-2012

Love it mate!! Awesome build!!

309 TD - Sambarker - 04-09-2012

Some new rimz

[Image: tymy5uqu.jpg]

And the start of my Matt red look

[Image: ame8ezu7.jpg]

309 TD - Pete - 04-09-2012

Nice! Are they the ones Rob was selling a while back? Look familiar. Need to get back to Rickys myself to get the arches rolled at some point.

Sent from my BlackBerry 9800 using Tapatalk

309 TD - Sambarker - 04-09-2012

Yeah they are Robs wheels

Going down Ricky's on Friday for some lowerage

309 TD - Icywalts - 04-09-2012

Absolutely love your wheels the same as mine except u have centres!! JEL!!! They will look small on the car but they do look good..

Filename: ImageUploadedByTapatalk1346797418.488026.jpg Size: 424.55 KB 04-09-2012, 10:23 PM

RE: 309 TD - Joe - 04-09-2012

right you are the man to ask, does the 309 steering wheel have an air bag? im 99.9% sure they dont! but do they?

RE: 309 TD - samass - 04-09-2012

saw a 309 derv today, thought it was you, but was far too quiet haha

like where you're going with the matt red!

309 TD - Sambarker - 05-09-2012

(04-09-2012, 11:29 PM)Joe Wrote: right you are the man to ask, does the 309 steering wheel have an air bag? im 99.9% sure they dont! but do they?

I have a gti wheel and it has no airbag

309 TD - Sambarker - 20-10-2012

New steering wheel

Filename: ImageUploadedByTapatalk1350759583.840329.jpg Size: 179.61 KB 20-10-2012, 06:59 PM

Also been doing a bit more red oxiding, so I have now painted the boot, bonnet, grill, front wings and n/s door! A bit at a time!

Got some new seats to fit (passenger side done) then I'm going to plate over the sunroof and attempt to drop the front a tiny bit more, this may involve a grinder as a temporary fix until i find some coilovers!

309 TD - Sambarker - 21-10-2012

[Image: 4ubu5a8e.jpg]

RE: 309 TD - jonny1.6 - 21-10-2012

wheels suit it to the ground needs more lows at the front though,loved seenin this project on .net keep up the good work sam

309 TD - Sambarker - 26-10-2012

Coilovers fitted today. They are FK coilovers for a 206 which I have had to modify slightly to fit.

[Image: 8ahyrypu.jpg]