306oc - Peugeot 306 Owners Club & Forum
Kezzers diablo gti6 - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Kezzers diablo gti6 (/showthread.php?tid=29656)

Pages: 1 2 3

RE: Kezzers diablo gti6 - Stef205 - 24-03-2015

(24-03-2015, 06:02 PM)O puglove Wrote: Just makes it look like you bought some. Gone im not even gona bother tryin to match The colour...... f*ck it black will do.... like when people put gti body kits on a 1.1 and think f*ck i'll spray it black thats easier . Then it just looks shit

Does this theory of yours apply to all models with black morettes?

RE: Kezzers diablo gti6 - puglove - 24-03-2015

Unless the car is black ..... yes

RE: Kezzers diablo gti6 - Stef205 - 24-03-2015

Interesting

RE: Kezzers diablo gti6 - Kezzer30 - 24-03-2015

Lmfao! Wow I've heard some things in my time
Well I could match the colour in fact I could do them any colour in want tbh
I've gone with a high gloss black from a spray gun which , will be flatted and buffed so they have a mirror face , and will sit nice next to a freshly painted grill and bumper (and soon bonnet when I have time )

When the can rattle canned matt black then I can sort of see where your coming from but otherwise I completely disagree . I'm hoping you will actually get over it but I fear you may not

RE: Kezzers diablo gti6 - puglove - 24-03-2015

Lol . You sir are a sarcastic dick. lol

I was only giving a appinion, but it has clearly upset you and i fear this somthing you may not get over lmao

RE: Kezzers diablo gti6 - Kezzer30 - 24-03-2015

Maybe I threw a bit or sarcasm in there as I was a little (shocked ) at your opinion on black morrettes in general, I really don't care your entitled to your opinion and as I'm on a public forum I except opinions.
I think they will look good that's the bottom line as it's my car
(Would you like a hug?) Wink

RE: Kezzers diablo gti6 - Kezzer30 - 24-03-2015

So let's update with today's work , job one was to finish prepping the bumper and to remove the splitter and central grill
[Image: 20150324_130954_zpse0kboll5.jpg]

I sanded down the splitter as it's actually been painted and was so badly damaged it was unclean able so needed a coat of black which I just rattled canned , as I could not bring myself to waste good paint on something that will be battered on the first drive out
[Image: 20150324_131924_zpsg8i3xmgr.jpg]
[Image: 20150324_132149_zpsxfceh7fz.jpg]

Next up it was time for primer so here are a few pics
[Image: 20150324_142731_zpsxoa6im3q.jpg]
[Image: 20150324_142736_zpss9eyqae8.jpg]
[Image: 20150324_142754_zpsqv1m6uwc.jpg]
[Image: 20150324_142822_zpsmwjns1wo.jpg]
[Image: 20150324_142836_zps4x7opf3j.jpg]

Here is a pic of the pug as she stands
[Image: 20150324_144042_zpsbytcvfgi.jpg]

Back to it then , as the morrettes where going a different colour to the bumper and grill they needed doing first so here they are , just need a light flat and buff on the face and will look spot on
[Image: 20150324_173737_zpsvbrnoa2w.jpg]
[Image: 20150324_204145_zpse2mqwqqt.jpg]

After it was time to colour and then lacquer the grill slam panel and bonnet and I will leave you all with them drying for the night
[Image: 20150324_211442_zps1iekrix2.jpg]
[Image: 20150324_211436_zpsbwj8jhnx.jpg]
[Image: 20150324_211431_zpsr3al4olm.jpg]
[Image: 20150324_211351_zpsyedrsbuv.jpg]
[Image: 20150324_211342_zpsjsaa8itv.jpg]

RE: Kezzers diablo gti6 - Moonwalker - 25-03-2015

Progress is looking great mate! Smile I need to get started on the body work on mines!

RE: Kezzers diablo gti6 - 7057sam - 25-03-2015

Top job mate,you should do the whole car Smile

RE: Kezzers diablo gti6 - Kezzer30 - 25-03-2015

Well I've put it all back together tonight and it looks stunning but waiting till morning to get pics as night pics are always crap

RE: Kezzers diablo gti6 - Kezzer30 - 26-03-2015

So literally have not stopped over last few days and only just had enough time to hit some snaps of the car this morning was hoping for some sun but these will have to do for now etc
[Image: 20150326_091147_zpsllnoew4j.jpg]
[Image: 20150326_091216_zpsn95j4n5d.jpg]
[Image: 20150326_091202_zpsluwajv03.jpg]

RE: Kezzers diablo gti6 - procta - 26-03-2015

i am not sure if i like the black morrettes, the paint job is good mind!

RE: Kezzers diablo gti6 - Kezzer30 - 26-03-2015

There is a little bit more to it have a small quirky plan for the car nothing major but in order for that plan the morrettes need to be black , in person it looks great.
Bonnet will be off next week and il be painting that as it's also covered in stone chips and lacquer peel due to the chips etc

RE: Kezzers diablo gti6 - Kezzer30 - 27-03-2015

Got a bit of sun so snapped a couple of pics
[Image: 20150327_083720_zpsjcmjic4o.jpg]
[Image: 20150327_083803_zps8yazkth4.jpg]

RE: Kezzers diablo gti6 - Kezzer30 - 28-03-2015

Ok so a small update I recently purchased an omp strut brace , I turned up the other day , as you can see its certainly had it day.
[Image: 20150328_200830_zps4exdabcu.jpg]
[Image: 20150328_200844_zps1mxbmjbf.jpg]
[Image: 20150328_200850_zps99xbk8zv.jpg]

So what to do with it , give it a 5 minute sand down and hit it with some rattle can back and bolt it on?
Nah , instead I'm going to sand the entire thing down so it's even and the polish the whole thing and lacquer it Smile
Unfortunatly my supplies have ran low so I didn't make a huge amount of progress tonight as the rust is pretty bad and deep but I did do a small teaser on what to expect
[Image: 20150328_212018_zpsaayeaffi.jpg]

RE: Kezzers diablo gti6 - Kezzer30 - 29-03-2015

So spent a tad more time after work of the small side of the brace , needs abit more but certainly looking a lot better
[Image: 050194b805cfea0ce13797e063928dbd_zpsasri9w3u.jpg]

RE: Kezzers diablo gti6 - 7057sam - 30-03-2015

I'm doing the exact same thing with my strut brace at the moment,looking forward to the update Smile

RE: Kezzers diablo gti6 - Kezzer30 - 30-03-2015

It would have been a lot easier if it was not so rusty as it's so deep it just takes for ever

RE: Kezzers diablo gti6 - Kezzer30 - 31-03-2015

So today I cracked on with the brace and got it to a decent standard .
[Image: 734cd646ec4e7b9033ba1cf63f189013_zpsntefr6db.jpg]
[Image: 2c84a09a41a5dd4731dca7b696b30cd8_zpsjydnk4xj.jpg]
[Image: 0f2437a79c3c7655ff78da9164bf0c06_zpsg66sfw28.jpg]

Also my new custom , brake fluid , power steering fluid , fuse box and ecu cover came today , so got them all on
[Image: f13907c727ae2a9ac22d01514434a054_zps6tmbf7dj.jpg]
[Image: 7f715122a0fa4e8830465cd2f6ce3a84_zpshstwbqf5.jpg]
[Image: 368e87f87935e2863d0119d01f7d8061_zpssipnchuy.jpg]

And this turned up and I will be making a start
[Image: 95fccb5f85423dd099d7c02fc2b47f0d_zpsknm64yam.jpg]

RE: Kezzers diablo gti6 - Kezzer30 - 31-03-2015

Did some on the inlet tonight here is a bit of early stage progress
[Image: 20150331_222902_zps3jeorv1p.jpg]

RE: Kezzers diablo gti6 - 7057sam - 31-03-2015

This project's comming on very quickly,got much else in the pipe line Smile

RE: Kezzers diablo gti6 - Kezzer30 - 31-03-2015

Plenty to come haha

RE: Kezzers diablo gti6 - Kezzer30 - 02-04-2015

So yesterday while I was shopping for a new drill I decided to see if b&q had anything I could make a intake pipe for My morrettes , I had an old intake cup to start with but it was big and would look a bit crap on its own , so I found some sink pipe kit for £7 and then had a great idea with a spot light surrounding which was £2 , I took the item home and got to work
I drilled and few holes in the old intake cup and attached the sink pipe
[Image: 20150401_194227_zps5fhssklv.jpg]

I then had a test fit with the spot light surrounding and I knew I would be good as it has 2 springs that hold it into the cup
[Image: 20150401_194255_zps3q39tpnh.jpg]
[Image: 20150401_194537_zpsbdmdw4ah.jpg]

Then sprayed it yellow and put on the car I made a small insertion into the standard air intake pipe so I have not messed with its original intake system

[Image: 20150401_221934_zpstyf0uwl9.jpg]
[Image: 20150402_090359_zpshnveip59.jpg]
[Image: 20150402_090428_zpsju7arcrb.jpg]

RE: Kezzers diablo gti6 - 7057sam - 02-04-2015

Looks good,should spray the inlet black to go with the lights.

How much work did the strut brace take to get it that shiny.

RE: Kezzers diablo gti6 - 1616six - 02-04-2015

Your front bumper needs pulling in a little, sits too far out under the wings.

RE: Kezzers diablo gti6 - Kezzer30 - 02-04-2015

Inlets getting polished mate , and jj yes just purchased my lowered jack so I can get under and stick 2 more bolts in

RE: Kezzers diablo gti6 - Kezzer30 - 03-04-2015

Some late night antics
[Image: 456a753aa36803e1e0e315b57f7eb806_zpsok4szsfi.jpg]

RE: Kezzers diablo gti6 - Kezzer30 - 03-04-2015

Popped the badge on this morning
[Image: 20150403_101107_zpstkcaatph.jpg]

RE: Kezzers diablo gti6 - Niall - 03-04-2015

This is looking awesome! Needs darker wheels though I reckon? Maybe anthracite?

RE: Kezzers diablo gti6 - adam b - 03-04-2015

The inner lights are horrendously expensive but available on eBay. It'd look better with a gloss black grill.

I genuinely hate body coloured morettes, mine are Matt black