+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Phase 1 Black 306 DTurbo - Road Test! (GT2052S, 11mm, FMIC) (/showthread.php?tid=22790)
Phase 1 Black 306 DTurbo - Reborn - silverzx - 24-04-2014
Bay got cleaned up yesterday.
![[Image: 7ebetaru.jpg]](http://img.tapatalk.com/d/14/04/24/7ebetaru.jpg)
Phase 1 Black 306 DTurbo - Reborn - mr_fish - 24-04-2014
Just the engines to swap bits over from now...any idea on turbo?
RE: Phase 1 Black 306 DTurbo - Reborn - silverzx - 24-04-2014
(24-04-2014, 05:19 PM)mr_fish Wrote: Just the engines to swap bits over from now...any idea on turbo?
Shall we go old school T2?
It's tight as a nuns..
RE: Phase 1 Black 306 DTurbo - Reborn - silverzx - 27-05-2014
Ninja stuff...
Phase 1 Black 306 DTurbo - Reborn - silverzx - 28-05-2014
Spec list is looking much better .. Just having teething issues with the Cambelt not sitting on the pulley right.
MASSIVE THANKS TO MR_FISH (MARK)!!
Anyway here's the spec:
Rebuilt engine with:
- new waterpump
- new Cambelt
- new tensioners
- new sump gasket
- new ARP head studs
- new clutch
- Rebuilt 11mm Bosch pump
- New Bosch duraterm glow plugs
- New oil breather hose
- New inlet/exhaust gasket
- New oil sandwich plate
- New 3.2L TT fuel filter
Other stuff:
- EGT gauge
- Oil temp / pressure gauge
- Boost gauge pre/post FMIC
- Water temp gauge
- FMIC
- Twin slim line fans
- Straight through to backbox
- GTi6 seats
- 205 Roland Garros steering wheel
- Uprated shocks
- Beam lowered 60-80mm
- Cut springs
Etc
And here's some photos:
![[Image: qu5aduda.jpg]](http://img.tapatalk.com/d/14/05/28/qu5aduda.jpg)
![[Image: 3adamu5e.jpg]](http://img.tapatalk.com/d/14/05/28/3adamu5e.jpg)
![[Image: 4uqy4y7a.jpg]](http://img.tapatalk.com/d/14/05/28/4uqy4y7a.jpg)
![[Image: amaqy2y7.jpg]](http://img.tapatalk.com/d/14/05/28/amaqy2y7.jpg)
![[Image: yvaqu6yv.jpg]](http://img.tapatalk.com/d/14/05/28/yvaqu6yv.jpg)
![[Image: uvequ4aj.jpg]](http://img.tapatalk.com/d/14/05/28/uvequ4aj.jpg)
![[Image: saja3eru.jpg]](http://img.tapatalk.com/d/14/05/28/saja3eru.jpg)
![[Image: 3apyvuda.jpg]](http://img.tapatalk.com/d/14/05/28/3apyvuda.jpg)
RE: Phase 1 Black 306 DTurbo - Reborn - ozonehostile - 28-05-2014
Coming along nicely dude. Making an appearance at FCS or coming in the datsun?
RE: Phase 1 Black 306 DTurbo - Reborn - silverzx - 28-05-2014
(28-05-2014, 11:14 AM)ozonehostile Wrote: Coming along nicely dude. Making an appearance at FCS or coming in the datsun?
Datsun, this thing isn't ready for road, still have to do:
- GTi6 brakes
- Springs/Coilies
- Cambelt alligned correctly
- FMIC plumbed in
- Gauges plumbed in
Then it will at least be drivable. Then get a bigger turbo on, have about four turbos in mind but it'd settle for a GT2052/56 S for the time being.
The T2 should be plenty of fun on FMIC/11mm for the time being anyway.
150 BHP old school T2.
RE: Phase 1 Black 306 DTurbo - Reborn - ozonehostile - 28-05-2014
Your cambelt issue, where isn't it sitting straight?
On the tensioner?
RE: Phase 1 Black 306 DTurbo - Reborn - silverzx - 28-05-2014
(28-05-2014, 01:49 PM)ozonehostile Wrote: Your cambelt issue, where isn't it sitting straight?
On the tensioner?
Cam and pump pulleys it's over hanging. Photos in XUD section.
RE: Phase 1 Black 306 DTurbo - Reborn - Piggy - 28-05-2014
coming along nicely fella....
still fancy a flocked centre console, clocks surround? Its just taking up space here...can bring to FCS for a tenner
RE: Phase 1 Black 306 DTurbo - Reborn - Danny Wideboy - 29-05-2014
Black PH1 FTW.
Coming along well dude.
RE: Phase 1 Black 306 DTurbo - Reborn - silverzx - 10-06-2014
Bought various bits and bobs at FCS for this including:
- GTi shocks / 60mm springs
- TA Technic Coil Overs
- GTi6 Front Brake Setup
- GT2052S
- Water Meth Pump
Should give me a bit to get on with.
RE: Phase 1 Black 306 DTurbo - Reborn - Piggy - 10-06-2014
Nice few bits there pal!!
What model fuel filter is that bud? Is it 10mm in/outs?
RE: Phase 1 Black 306 DTurbo - Reborn - silverzx - 10-06-2014
(10-06-2014, 12:32 PM)Piggy Wrote: Nice few bits there pal!!
What model fuel filter is that bud? Is it 10mm in/outs?
Quote:3.2L TT fuel filter
Can't remember what inlet/outlet size are, it's just "big-f*ck-off" spec.
RE: Phase 1 Black 306 DTurbo - Reborn - Piggy - 10-06-2014
Ahh yeah...looked into those, think they 8mm in/out though.
Thanks tho
RE: Phase 1 Black 306 DTurbo - Reborn - ozonehostile - 10-06-2014
Yeah tt filters are 8mm standard 306 size
Phase 1 Black 306 DTurbo - Reborn - silverzx - 16-07-2014
Fitted the gti shocks and springs last night.
My god the suspension on there was so pikey you wouldn't believe it.
![[Image: esesy6yd.jpg]](http://img.tapatalk.com/d/14/07/16/esesy6yd.jpg)
![[Image: qu5abu5e.jpg]](http://img.tapatalk.com/d/14/07/16/qu5abu5e.jpg)
![[Image: hugypy3y.jpg]](http://img.tapatalk.com/d/14/07/16/hugypy3y.jpg)
RE: Phase 1 Black 306 DTurbo - Reborn - Frosty - 16-07-2014
What the hell went through someones brain to do that to the springs! Cable ties are good for a lot of things but to hold springs in is 1 step to far
RE: Phase 1 Black 306 DTurbo - Reborn - silverzx - 16-07-2014
(16-07-2014, 12:27 PM)Frosty Wrote: What the hell went through someones brain to do that to the springs! Cable ties are good for a lot of things but to hold springs in is 1 step to far
Pfft, not suprised tbh, kid I bought it off drives a Saxo VTS or something and sold the car with blown rods..
RE: Phase 1 Black 306 DTurbo - Reborn - nominous - 16-07-2014
Wow. Just wow.
Phase 1 Black 306 DTurbo - Reborn - silverzx - 16-07-2014
Haha!
Get your ninja out!
Few people will recognise this beast:
![[Image: hetyqy5e.jpg]](http://img.tapatalk.com/d/14/07/16/hetyqy5e.jpg)
Again, sorry for destroying your box with epic drifting Mark. Love you!
RE: Phase 1 Black 306 DTurbo - Reborn - Piggy - 16-07-2014
GT20 of some sort?
Phase 1 Black 306 DTurbo - Reborn - mr_fish - 16-07-2014
As long as it was an epic drift, I'll let you off...
Phase 1 Black 306 DTurbo - Reborn - silverzx - 17-07-2014
It sure was Mark, it sure was...!
More pics..
![[Image: du3ada8e.jpg]](http://img.tapatalk.com/d/14/07/17/du3ada8e.jpg)
![[Image: uzu7yhyg.jpg]](http://img.tapatalk.com/d/14/07/17/uzu7yhyg.jpg)
![[Image: avave9yz.jpg]](http://img.tapatalk.com/d/14/07/17/avave9yz.jpg)
RE: Phase 1 Black 306 DTurbo - Reborn - Tom - 17-07-2014
Haha pikey lowering ftw!! Thats outrageous!
RE: Phase 1 Black 306 DTurbo - Reborn - ozonehostile - 17-07-2014
Oh dear Ivan ?I didn't know he was that much of a pikey haha
At least it's got something more substantial on there now
Phase 1 Black 306 DTurbo - Reborn - silverzx - 17-07-2014
Yeah it's bad!
Got some fabrication done tonight.
![[Image: husypedy.jpg]](http://img.tapatalk.com/d/14/07/18/husypedy.jpg)
![[Image: y9apymu3.jpg]](http://img.tapatalk.com/d/14/07/18/y9apymu3.jpg)
![[Image: ase6ahuh.jpg]](http://img.tapatalk.com/d/14/07/18/ase6ahuh.jpg)
![[Image: eqebu2y8.jpg]](http://img.tapatalk.com/d/14/07/18/eqebu2y8.jpg)
![[Image: u6umuvyd.jpg]](http://img.tapatalk.com/d/14/07/18/u6umuvyd.jpg)
RE: Phase 1 Black 306 DTurbo - Reborn - ozonehostile - 18-07-2014
Nice to see some progress dude
RE: Phase 1 Black 306 DTurbo - Reborn - silverzx - 18-07-2014
(18-07-2014, 01:38 PM)ozonehostile Wrote: Nice to see some progress dude
Pulling my finger out.
RE: Phase 1 Black 306 DTurbo - Reborn (GT2052S) - Tom - 18-07-2014
Nice to see the effort of a proper downpipe!! Good job sir