+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: Jacking (/showthread.php?tid=18637)
Pages:
1
2
RE: Jacking - Jonny81191 - 05-11-2013
RE: Jacking - lolsteve - 06-11-2013
Certified jackin
http://www.youtube.com/watch?v=dpbh_YpUeq4
RE: Jacking - c.gerrard - 06-11-2013
It was halfords for the record not aldi
So, using a trolley jack onto those tie down loops should be fine, as long as the wheels on the jack are turning.
RE: Jacking - Tom - 06-11-2013
As long as the jack is moving undercard as you jack, not the jack staying still and the car being pulled towards you.
RE: Jacking - cully - 06-11-2013
![[Image: dodgy-repair.jpg]](http://ct.weirdnutdaily.com/ol/wn/sw/userpics/funny_pictures/dodgy-repair.jpg)
![[Image: Dangerous-car-repair.jpg]](http://www.funnyandhappy.com/wp-content/uploads/2013/07/Dangerous-car-repair.jpg)
![[Image: 24.jpg]](http://laprevention.be/wp-content/uploads/2012/04/24.jpg)
dont try any of these
RE: Jacking - Grant - 06-11-2013
He doesn't need to. He can just get Jonny to walk underneath it on the deck
RE: Jacking - Poodle - 06-11-2013
Ramps then jack from the centre of the subframe, it's how i do mine and that's low enough to be a pita. If you're having problems with cars falling off you're either not seating the stands properly or the ground is too uneven/sloped to be working on.