306oc - Peugeot 306 Owners Club & Forum
hi - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: hi (/showthread.php?tid=18319)

Pages: 1 2


RE: hi - vanman - 25-10-2013

mmmm it go's hard after 4 to 6 pumps so i don't know ?


hi - devils_fuel - 31-10-2013

(25-10-2013, 11:55 AM)Jenkosowls Wrote:
(25-10-2013, 10:37 AM)vanman Wrote: hi thanks jenkosowls iv just gone tryed 3 cycles on glowplugs and i tested power to plugs is 12v then clicks off,but still the same, so is your car 173bhp.

It used to be it's now in a skip awaiting scrap!

Diesels ignite there fuel under high compression after an initial heat source. A dodgy or weak plug won't ignite the fuel till it's got heat so Un burnt fuel is the white smoke. I found that 2 non working plugs causes havoc!

My old bosche'd xud did this when glow plugs were failing which then lead me to doing the above guide.

I looked into doing the Bosch conversion on my nad berlingo but it's different bracket and cambelt setup on them just easier to buy a Dt lump and drop that in

I have the same problem with my DT, new Bosch plugs and the problem is still there - to me it's feels/sounds like the cold start isn't kicking in straight away, after a while mines fine