+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: 306 hdi remap (/showthread.php?tid=16881)
RE: 306 hdi remap - ttbook - 10-09-2013
that was the main reason i did mine.. dont quite have the money for a new car yet, but im happy keeping it now!
Mine was done on 127k, no idea about when is good or bad time to do it?
RE: 306 hdi remap - Poodle - 10-09-2013
Depends what condition the engine is in tbh, remapping it won't do any harm, but it might highlight existing problems.
RE: 306 hdi remap - WILL1000 - 12-09-2013
remapped my estate its done 141k and also decatted alot better to drive but my clutch has started to slip when i hit 2000 rpm with me foot to the floor but suppose it would of started to slip soon enough remap or not.
RE: 306 hdi remap - AMJAZZ - 16-09-2013
Guys, sorry if this had been covered, but how much £ is a stage 1 remap?
RE: 306 hdi remap - DeeTurbo - 16-09-2013
Between 70-80 if you use whippy or pro steve.
Re: RE: 306 hdi remap - bigtone0777 - 16-09-2013
(16-09-2013, 10:04 PM)DeeTurbo Wrote: Between 70-80 if you use whippy or pro steve.
Is that just to buy the file or is that uploaded to the ecu too?
RE: 306 hdi remap - DeeTurbo - 16-09-2013
Just to buy a file.
RE: 306 hdi remap - bigtone0777 - 17-09-2013
Do you need posh equipment to upload or do those 20 quid flea bay jobs do the trick?
RE: 306 hdi remap - Poodle - 18-09-2013
Clone tool off ebay will be fine, people argue over whether the galletto or kwp are better, but theres nothing in it as best I can see, so take your pick.
RE: 306 hdi remap - C2K - 19-09-2013
I remapped mine at 180K, so no.
RE: 306 hdi remap - Ricky - 10-10-2013
(29-08-2013, 02:27 PM)Toms306 Wrote: If you fall asleep during a 30-70, its not mapped -
http://www.youtube.com/watch?v=ac9YPwcsTQU
S1 mapped ones are slightly faster, not much though.
http://www.youtube.com/watch?v=fvJuDwwKrgs
Also got a stage 1 vid of my china estate - no before with this one though.
http://www.youtube.com/watch?v=fHPhJ5iwqq4
Enjoy the injector tick on the fist vid haha!
Thread revival, but dayum your china estate vid looks slower than mine standard! Unless mine is mapped, which I doubt very much. If it is mapped, stage one is really rubbish..
RE: 306 hdi remap - Midnightclub - 11-10-2013
A decent stage one should definitely be a noticeable difference, if it isn't then something's either broken or it's not a very good map
RE: 306 hdi remap - Ricky - 11-10-2013
I might actually be able to afford to map mine after next week, fingers crossed.
RE: 306 hdi remap - rd070707 - 11-10-2013
I want to load my stage one but I fear for my clutch as I think the release bearing is rattling
RE: 306 hdi remap - Midnightclub - 11-10-2013
Excuse to put a nice shiney new one in though
RE: 306 hdi remap - Toms306 - 11-10-2013
You need to put new one in anyway before it explodes....
RE: 306 hdi remap - rd070707 - 11-10-2013
Yeah but probs talking like 200 plus for a clutch change using a valeo. Could do without atm lol
RE: 306 hdi remap - Arron - 11-10-2013
They dont really explode they just slip until you cant set off with anything more than quarter throttle after 1st gear!!
Seriously tho if you remap to stage 1 from stock and there isnt 'much' difference... there is something wrong with your car!! Stage 1 from stock is like night and day and well worth the money.
RE: 306 hdi remap - rd070707 - 11-10-2013
My clutch is hard work when pulling off in 1st, bit juddery. May get saving for a valeo
RE: 306 hdi remap - Midnightclub - 11-10-2013
Our valeo is still holding give or take 280 lb/ft, it's the one i'd go for
RE: 306 hdi remap - Toms306 - 11-10-2013
(11-10-2013, 03:05 PM)Arron Wrote: They dont really explode they just slip until you cant set off with anything more than quarter throttle after 1st gear!!
Seriously tho if you remap to stage 1 from stock and there isnt 'much' difference... there is something wrong with your car!! Stage 1 from stock is like night and day and well worth the money.
I've never seen a rattly release bearing slip.
Worn clutch plate maybe, but that's not the issue lol.Seriously though, they do just explode eventually and you end up with ball bearings everywhere, not something you wanna chance when it starts whining!
RE: 306 hdi remap - Arron - 11-10-2013
True say tom!!!! :meh:. id just drive on if you aint got the funds. As said most oem if not all will handle stage 1.
Thinking...My paddle rattles like a bitch after a spirited drive... is that normal??
RE: 306 hdi remap - Midnightclub - 11-10-2013
Did you get a sprung or unsprung centre arron?
RE: 306 hdi remap - Ricky - 11-10-2013
(11-10-2013, 04:25 PM)Arron Wrote: True say tom!!!! :meh:. id just drive on if you aint got the funds. As said most oem if not all will handle stage 1.
Thinking...My paddle rattles like a bitch after a spirited drive... is that normal??
My unsprung paddle on the XUD rattled like mad, was quite embarrassing actually!
RE: 306 hdi remap - rd070707 - 11-10-2013
Do you think if I were to chuck the map on would it give in quicker or will it just choose its own time anyway?
RE: 306 hdi remap - Toms306 - 11-10-2013
It'll chose it's time. I ran a stage 1 with a really noisy bearing and a slippy clutch as I knew I wasn't gonna keep the car long and I couldn't deal with the slowness of standard lol..... It lasted 6 months until I broke it for parts....and the bearing fell apart in my hand so definitely didn't have long left, was just lucky with that though really, it could've gone at any point.
RE: 306 hdi remap - Ricky - 11-10-2013
It's going to go with or without a remap.
RE: 306 hdi remap - Arron - 11-10-2013
Its that sachs paddle.. sprung.
its not majorly loud... or should I say it hasnt concerned me. Ricky also when the clutch is warm does ut become more juddery to set off... or should I say snatchy?
Just assumed it was all part of it been uprated. Clutch dont slip like.....
Tom you pounded that car!
RE: 306 hdi remap - Midnightclub - 11-10-2013
If it's sprung.. then the clutch springs may well have snapped, they don't tend to like much over 270 lb/ft (can't remember how much torque yours is off the top of my head)
RE: 306 hdi remap - Toms306 - 11-10-2013
Meh, that's what I bought it for.
As for the paddle clutch, I've never had one myself but I drove a Golf with one, it was horrible, snatchy and I kept stalling trying to pull away lol. Wasn't so bad on the move though, but still put me off getting one!