306oc - Peugeot 306 Owners Club & Forum
Black Phase 1 DTurbo = Win. - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Black Phase 1 DTurbo = Win. (/showthread.php?tid=1077)

Pages: 1 2 3

Re: Black Phase 1 DTurbo = Win. - studturbo - 09-03-2012

Wish i got that intercooler kit now Sad
RED

Re: Black Phase 1 DTurbo = Win. - Ruan - 09-03-2012

It'll definitely be a 1 piece gasket.... All Turbo XUD9s are a one piece gasket, it's the NAs that aren't.

Re: Black Phase 1 DTurbo = Win. - silverzx - 09-03-2012

Nice one Ruan! Mills the place to go for a new one?

Re: Black Phase 1 DTurbo = Win. - silverzx - 13-03-2012

Not much of an update but replaced my tired air filter and adjusted pumps throttle/LDA some more.

1 - Old vs New
[Image: IMG_0803.jpg]
2 - Old vs New
[Image: IMG_0804.jpg]
3 - Fitted
[Image: IMG_0805.jpg]
4 - Fitted
[Image: IMG_0806.jpg]
5 - Fitted
[Image: IMG_0807.jpg]
6 - Bay
[Image: IMG_0808.jpg]
7 - Pump
[Image: IMG_0809.jpg]
8 - LDA
[Image: IMG_0811.jpg]

Re: Black Phase 1 DTurbo = Win. - mark_airey - 13-03-2012

Looks good mate, the IC kit should be great, shouldn't need to hack the bumper up to get that in Smile

Get it fitted then, I still see a top mount in the pics ninja

Re: Black Phase 1 DTurbo = Win. - silverzx - 13-03-2012

mark_airey Wrote:Looks good mate, the IC kit should be great, shouldn't need to hack the bumper up to get that in Smile

Get it fitted then, I still see a top mount in the pics ninja

Cheers mate, trying not to rush into the FMIC though. Need order a gasket (I'll do that now), and some 90* silicone bends.

Re: Black Phase 1 DTurbo = Win. - mark_airey - 13-03-2012

Crack on then Tongue

Re: Black Phase 1 DTurbo = Win. - ginge191 - 13-03-2012

silverzx Wrote:Cheers mate, trying not to rush into the FMIC though. Need order a gasket (I'll do that now), and some 90* silicone bends.

i've got one if you need one pal...

Re: Black Phase 1 DTurbo = Win. - mark_airey - 13-03-2012

ginge191 Wrote:I've got one if you need one pal...

Inlet/exhaust one that is required IIRC for what they cost he would be as well just just get one Smile

Re: Black Phase 1 DTurbo = Win. - ginge191 - 13-03-2012

mark_airey Wrote:
ginge191 Wrote:I've got one if you need one pal...

Inlet/exhaust one that is required IIRC for what they cost he would be as well just just get one Smile

sorry, i meant a 90* silicone :roll: my bad... and a piece of straight pipe if its any good..

Re: Black Phase 1 DTurbo = Win. - silverzx - 14-03-2012

I got a gasket from my local for £5 ~ something. So that's sorted.

Ginge, do you have one 90* bend silicone? Is it 2.25"? Big Grin

Re: Black Phase 1 DTurbo = Win. - devils_fuel - 18-03-2012

Are the breaks ok?

Re: Black Phase 1 DTurbo = Win. - silverzx - 18-03-2012

Bit of squealing when turning now and then but I'm sure that's them just bedding in. :thumbup:

Re: Black Phase 1 DTurbo = Win. - silverzx - 19-03-2012

Gave her a oil & filter service along with tweaking LDA some more and fine tuning.

Devil_Fuel & Connor were also kind enough to fit my 266's in the pouring rain on Saturday! Nice one lads!

Few updates & pic's below:

1 - Cleaned Inlet.
[Image: IMG_0757.jpg]
2 - De-badge (don't like it).
[Image: IMG_0769.jpg]
3 - De-badge (don't like it).
[Image: IMG_0770.jpg]
4 - LDA hanging on by couple threads.
[Image: IMG_0783.jpg]
5 - Inlet/Exhaust gasket for FMIC (says XUD7 but looks same)?
[Image: IMG_0828.jpg]
6 - Close up of ^ label.
[Image: IMG_0830.jpg]
7 - LDA pins from scrappy.
[Image: IMG_0831.jpg]
8 - Oil used on left, potential usable oil on right?
[Image: IMG_0832.jpg]

Re: Black Phase 1 DTurbo = Win. - Pugmarshall - 20-03-2012

I recently ordered some gaskets for my dturbo, all BGA gaskets, and they all say XUD7 too, wouldn't worry about it Smile

Re: Black Phase 1 DTurbo = Win. - Connor - 20-03-2012

Id say 15w40 was too thick, but seeing as you already have it, might as well use it lol

Re: Black Phase 1 DTurbo = Win. - silverzx - 28-03-2012

Passed MOT, so fresh 12 months on the old girl.

Ordered and received last bits I need to fit my FMIC.

Did some detailing. Mainly removing vegetable oil stains from the fuel tank area..

Running well on 25 psi. 8-)

1. TCut fuel cap area
[Image: th_P1030827.jpg]

2. TCut whole car
[Image: th_P1030826.jpg]

Turned out pretty well. :dance:

3. Before
[Image: th_P1030829.jpg]

4. After
[Image: th_P1030831.jpg]

5. After
[Image: th_P1030832.jpg]

Painted my inlet manifold red to match my pipes and silicone etc.

6. Xantia inlet
[Image: th_P1030834.jpg]

Gave some of the body a good seeing to

7. Wax & polish
[Image: th_P1030833.jpg]

8. Bonnet after
[Image: th_P1030837.jpg]

9. Shiney wing
[Image: th_P1030839.jpg]

10. Shiny'ish car
[Image: th_P1030840.jpg]

And couple of pictures at bottom of my field

11. Car at field
[Image: th_P1030847.jpg]

12. Car at field
[Image: th_P1030846.jpg]

Re: Black Phase 1 DTurbo = Win. - studturbo - 28-03-2012

Red inlet manifold Smile same as me

Re: Black Phase 1 DTurbo = Win. - silverzx - 20-04-2012

If weathers good going to mock up the FMIC over next couple of days.

FMIC parts to date:

- Single pass 2.25" FMIC 550x140x65
- (2) 90 degrees Mandrel Bent Pipes
- (2) 135 degrees Mandrel Bent Pipes
- (2) U Mandrel Bent Pipes
- (2) Straight Pipes
- (8) Straight Triple layers Silicone Couplers
- (16) Clamps
- (2) 90 degrees silicone coupler
- Inlet/Exhaust Gasket
- Xantia inlet manifold (red)
- Xantia FMIC piping: (Turbo pipe, inlet pipe with LDA feed, S bend)

Re: Black Phase 1 DTurbo = Win. - silverzx - 22-04-2012

Got a bit carried away with the pipes!

1
[Image: IMG_0918.jpg]

2
[Image: IMG_0921.jpg]

3
[Image: IMG_0927.jpg]

If all goes to plan should be on by end of next month.

Re: Black Phase 1 DTurbo = Win. - Dan! - 22-04-2012

Looks like you've got enough for 3 fmic systems there! haha Big Grin

Re: Black Phase 1 DTurbo = Win. - puglove - 22-04-2012

Looks tidy dude , black ph1s are pure porn. a set of ph1/2 side skirts need adding to the wanted list Smile

Re: Black Phase 1 DTurbo = Win. - silverzx - 22-04-2012

@!Dan - Haha tell me about it, thought I'd get too many then not enough. Also not 100% sure what way I'm going to route it yet so at least having lots of pipes leaves my options open!

@puglove - Cheers mate, not sure if I can be arsed with side skirts etc. Quite happy just leaving the bodywork standard. Do the skirts really make that much difference? Tongue

Re: Black Phase 1 DTurbo = Win. - puglove - 22-04-2012

Personally i always think the sill looks like its been bent with out them, just make the 306 look that little bit wider and meaner, also looks a bit low spec with out them i think

Re: Black Phase 1 DTurbo = Win. - puglove - 22-04-2012

Stolen from mr lobb to give you an idea of the difference with skirts

[Image: DSC04482.jpg]
[Image: P1030699.jpg]

Re: Black Phase 1 DTurbo = Win. - silverzx - 22-04-2012

Yeah it looks good mate! Smile How much do skirts go for roughly?

Re: Black Phase 1 DTurbo = Win. - Ruan - 23-04-2012

Not a case of how much, it's how often!!!!

I've been looking for a set for bledy years that aren't fecked or £ra*e.99...

Re: Black Phase 1 DTurbo = Win. - puglove - 23-04-2012

It just so happens i have a set of 3door astor grey ones you could have for 30 notes just throw a can of black over them Smile

Re: Black Phase 1 DTurbo = Win. - Ruan - 23-04-2012

Dammit!

Re: Black Phase 1 DTurbo = Win. - mark_airey - 23-04-2012

Ruan Wrote:Dammit!

And I even offered you one of the 2 sets I have which you turned down so stop bloody complaining!