306oc - Peugeot 306 Owners Club & Forum
Miss_Tap's Diablo GTi-6 > XUD project - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Miss_Tap's Diablo GTi-6 > XUD project (/showthread.php?tid=3700)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Miss_Tap's Diablo GTi-6 > XUD project - devils_fuel - 13-09-2013

(13-09-2013, 03:06 PM)THE_Liam Wrote: The MOT tester is gonna get a surprise when he starts it lol

Smoke test only mate!

He'll also have I wait for the glowplug light to go out before its starts lol

Re: Miss_Tap's Diablo GTi-6 > XUD project - THE_Liam - 13-09-2013

Does it have one?

Miss_Tap's Diablo GTi-6 > XUD project - MissTap_GTI6 - 13-09-2013

Nope...

RE: Miss_Tap's Diablo GTi-6 > XUD project - Rich306 - 13-09-2013

I'd pop a set of Diesel clocks in it then Smile

RE: Miss_Tap's Diablo GTi-6 > XUD project - Pompey306mark - 13-09-2013

I have a set of phase one diesel clocks with metal monkey dials. But I think you will need phase 2 clocks.

RE: Miss_Tap's Diablo GTi-6 > XUD project - ginge191 - 13-09-2013

It doesnt NEED diesel clocks at all - all the dials work besides the rev gauge, which on a derv is IMO pointless Tongue

As for a glowplug light, it's not particularly essential, im sure most are aware of how long the glowplug relay is live for, anywho, if it's really needed, i can wire in an LED if needed lol

RE: Miss_Tap's Diablo GTi-6 > XUD project - darrenjlobb - 13-09-2013

Glow plug light can just be wired into a spare light on the cluster, plenty of them...

RE: Miss_Tap's Diablo GTi-6 > XUD project - Rich306 - 14-09-2013

(13-09-2013, 08:16 PM)ginge191 Wrote: It doesnt NEED diesel clocks at all - all the dials work besides the rev gauge, which on a derv is IMO pointless Tongue

As for a glowplug light, it's not particularly essential, im sure most are aware of how long the glowplug relay is live for, anywho, if it's really needed, i can wire in an LED if needed lol

Wanting to keep the 'Gti 6' feel then buddy?! hehe

Miss_Tap's Diablo GTi-6 > XUD project - MissTap_GTI6 - 14-09-2013

Yeah right! Gotta keep her perdy!

RE: Miss_Tap's Diablo GTi-6 > XUD project - Piggy - 14-09-2013

the glow plug blank IS there on the petrol clocks...just put a bulb/holder in the blank.

It worked on the ph3 petrol clocks on mine for a few test runs anyway

RE: Miss_Tap's Diablo GTi-6 > XUD project - MissTap_GTI6 - 14-09-2013

(14-09-2013, 07:17 PM)Piggy Wrote: the glow plug blank IS there on the petrol clocks...just put a bulb/holder in the blank.

It worked on the ph3 petrol clocks on mine for a few test runs anyway

Orly??
That could save a lot of hassle! Thanks for the advice!

RE: Miss_Tap's Diablo GTi-6 > XUD project - Rich306 - 15-09-2013

Did you manage to sell the engine then?

Miss_Tap's Diablo GTi-6 > XUD project - td_dan - 16-09-2013

Its about time you got this up lol, glad to see everythings going well and glad i could help

RE: Miss_Tap's Diablo GTi-6 > XUD project - 4WayDiablo - 16-09-2013

what turbo/ pump setup do you have?

RE: Miss_Tap's Diablo GTi-6 > XUD project - MissTap_GTI6 - 16-09-2013

(16-09-2013, 05:24 AM)td_dan Wrote: Its about time you got this up lol, glad to see everythings going well and glad i could help

You saved the day, you really did, Thank you so much!


(16-09-2013, 11:17 AM)4WayDiablo Wrote: what turbo/ pump setup do you have?

K14 and Max's previous 9mm Bosch on there Smile

RE: Miss_Tap's Diablo GTi-6 > XUD project - 4WayDiablo - 16-09-2013

Sweet. Take it you have given it a tune?

Miss_Tap's Diablo GTi-6 > XUD project - MissTap_GTI6 - 16-09-2013

(16-09-2013, 01:49 PM)4WayDiablo Wrote: Sweet. Take it you have given it a tune?

No, it's not on the road yet! Almost Prambs, almost!

RE: Miss_Tap's Diablo GTi-6 > XUD project - Poodle - 16-09-2013

For anyone reading, who may be wondering: yes, you do have to declare the engine change and get it all orted before you can get it through an MOT.

Miss_Tap's Diablo GTi-6 > XUD project - td_dan - 16-09-2013

(16-09-2013, 12:18 PM)MissTap_GTI6 Wrote: You saved the day, you really did, Thank you so much!

Not a problem would rather it all went to a good cause be good to see it on the road

RE: Miss_Tap's Diablo GTi-6 > XUD project - 4WayDiablo - 16-09-2013

(16-09-2013, 01:55 PM)MissTap_GTI6 Wrote:
(16-09-2013, 01:49 PM)4WayDiablo Wrote: Sweet. Take it you have given it a tune?

No, it's not on the road yet! Almost Prambs, almost!

What's up with it? What more needs doing? You should have give me a shout as I can get an engine crane! Lol my grandad has one and never uses it!

RE: Miss_Tap's Diablo GTi-6 > XUD project - ginge191 - 16-09-2013

All shall be revealed soon! I hope...

RE: Miss_Tap's Diablo GTi-6 > XUD project - 4WayDiablo - 16-09-2013

Or you could just tell us....lol then we can offer help and maybe advice

RE: Miss_Tap's Diablo GTi-6 > XUD project - ginge191 - 16-09-2013

(16-09-2013, 05:18 PM)4WayDiablo Wrote: Or you could just tell us....lol then we can offer help and maybe advice

Angel

Re: Miss_Tap's Diablo GTi-6 > XUD project - vlj - 16-09-2013

ninja

RE: Miss_Tap's Diablo GTi-6 > XUD project - Piggy - 16-09-2013

Popcorn

RE: Miss_Tap's Diablo GTi-6 > XUD project - strictly_perv - 16-09-2013

Turn that pump down if anything! It's set up for 170bhp!
I'm running the second pump which I had on the 205, when it got dynoed at 190bhp, plus the wastegates not been touched yet, chronic coal haha.
Be good to see the ol' tapper running again.g

RE: Miss_Tap's Diablo GTi-6 > XUD project - ginge191 - 16-09-2013

still needs retarding slightly i feel; quite smokey on idle.

Will have a play around tomorrow.

RE: Miss_Tap's Diablo GTi-6 > XUD project - ginge191 - 17-09-2013

small update; weather has been CRAP so been stuck in the confinement of the garage; not wide enough to get a jack under and get on with any under work (exhaust, arches, bumper) so got on with what we could.
Sorted out the glowplug relay after having issues with getting the relay power and then not holding the 12v. Anywho, sorted it, NOT bodged Tongue


managed to get slam panel, rad, hoses and fans on;

[Image: f1W2iqX.jpg]


Had to get to the scrappy and get an intercooler to use and a top rad hose; to cut a long story short, the car NEEDS to be on the road asap, with the 406 inlet manifold, i can't fit a standard TMIC as manifold change requires the K14 to be removed/pulled off etc.. havn't the time to do this, so a quick intercooler setup was required.
It's not fantastic but should do the job. SMIC FTW!

[Image: C5yPAeA.jpg]

RE: Miss_Tap's Diablo GTi-6 > XUD project - 4WayDiablo - 17-09-2013

Interesting setup haha
I should imagine it would be better than a TMIC but not as good as a FMIC.
Good work though!

RE: Miss_Tap's Diablo GTi-6 > XUD project - ginge191 - 17-09-2013

(17-09-2013, 05:24 PM)4WayDiablo Wrote: Interesting setup haha
I should imagine it would be better than a TMIC but not as good as a FMIC.
Good work though!

pretty much; we have no liner for a TMIC, plus it hasn't the burden of engine heat rising through it like a TMIC; in theory, it should be alright, plenty of space to radiate heat, with at least some air flow to it.
It's not to cool anything huge for now, so should suffice!