+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Cully's Bianca 6 R150 YVM (/showthread.php?tid=13188)
RE: Cully's Bianca 6 R150 YVM - Eeyore - 19-03-2014
I know the feeling man. I cant hear anything driving my car at the moment
Cully's Bianca 6 R150 YVM - devils_fuel - 20-03-2014
Ah you off to the ring mate?
RE: Cully's Bianca 6 R150 YVM - cully - 20-03-2014
(20-03-2014, 09:22 PM)devils_fuel Wrote: Ah you off to the ring mate?
yup cars nearly ready now!
just need to change a track rod end but may do both as i have them here and the spare wheel cradle hook,
will be a quiet drive over and even have a working radio now
Cully's Bianca 6 R150 YVM - devils_fuel - 20-03-2014
Nice..true oem with the extra boxes
I'm sure the car will be nice, reliable and thirsty all the way there and back
Cully's Bianca 6 R150 YVM - rocker8742 - 22-03-2014
Man up :p my exhaust was nice and loud by the time we'd gone all over Europe lol
RE: Cully's Bianca 6 R150 YVM - cully - 30-03-2014
finished making these badboys today just need to fit them to see how good my welded alinement is
![[Image: DSCF1364.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1364.jpg.html)
RE: Cully's Bianca 6 R150 YVM - Niall - 30-03-2014
Awaits "My rear axle fell off at 80mph on a county lane" thread.
RE: Cully's Bianca 6 R150 YVM - Tom - 30-03-2014
Very nice!
RE: Cully's Bianca 6 R150 YVM - cully - 30-03-2014
no chance of that niall theres good penatration on them welds
RE: Cully's Bianca 6 R150 YVM - Niall - 30-03-2014
Just make sure you put some cable ties around the beam and the boot floor just in case they do break away eh
Cully's Bianca 6 R150 YVM - devils_fuel - 30-03-2014
Dare you to ride the ring with those mounts
RE: Cully's Bianca 6 R150 YVM - cully - 08-04-2014
nearly ready for the ring trip now
today ive replaced the P bush's for some Partner ones cant quite finish it as i need 2x 10mm 1.25 x 20 mm bolts for fixing the Bush to chassis
ive also renewed the top engine stabaliser buffer rubbers for new as the old was worn should stop the engine movment a little more with the fillets i added when i did the cracked top mount
[attachment=15107]
RE: Cully's Bianca 6 R150 YVM - jammapic - 08-04-2014
Looking good mate... Hopefully starting my EPAS install tonight, and my 306 will be ready for the 'ring trip too!!
RE: Cully's Bianca 6 R150 YVM - devils_fuel - 08-04-2014
put my partner bushes on at the weekend...cars still at Zachs with a leaky waterpump. Will let you know what it drives like
RE: Cully's Bianca 6 R150 YVM - Niall - 08-04-2014
(08-04-2014, 11:56 AM)jammapic Wrote: Looking good mate... Hopefully starting my EPAS install tonight, and my 306 will be ready for the 'ring trip too!!
Hope your ready for noise PAS now! lol
RE: Cully's Bianca 6 R150 YVM - cully - 09-04-2014
just been for a little hoon
the car is different in its off throttle behaviour the rear dont want to over take front!
the old P bushes must be quite soft with lots of movment room, unlike these partner ones
Partner Bush's are well worth the effort in changing them
but dont forget to buy two 10mm x 1.25 x 20mm bolt as your old 8mm chassis bolt is too small
RE: Cully's Bianca 6 R150 YVM - 7057sam - 09-04-2014
One best mods I've done was the solid rear mounts soo good
Good bye let off oversteer
RE: Cully's Bianca 6 R150 YVM - cully - 12-04-2014
took the car on an twisty shake down tonight i realy do like the way this goes now even though its got a std exhust
i do think im in love!!
lovely 80mile trip
google maps
and if anyone wants a good twisty road i can recomend the A39 taunton to minhead then onto the A396 at dunster to tiverton
RE: Cully's Bianca 6 R150 YVM - Piggy - 13-04-2014
Taunton to minehead and bridgewater to minehead are both epic roads, I drive them once a month...
But overtaking spots are almost non existant and theres always a caravan/boat/bus/doddery old git who does 27mph to ruin the journey
Sounds like you're a happy bunny fella
RE: Cully's Bianca 6 R150 YVM - RetroPug - 13-04-2014
(12-04-2014, 10:43 PM)cully Wrote: took the car on an twisty shake down tonight i realy do like the way this goes now even though its got a std exhust
i do think im in love!!
lovely 80mile trip
IMO the standard exhaust really is great.
Quiet, yes, but very well tuned to the engine and good for low-down pull.
Interesting that you seem to rate the partner p-bushes as a lot of other people seem to as well. I reckon I'll be doing this soon as well.
RE: Cully's Bianca 6 R150 YVM - Midnightclub - 13-04-2014
Completely agree about the stock exhaust, what you gain in top end power with a bigger zaust you definitely lose lower down-mid torque.. saw a big increase in torque going from my straight through to a scorpion system
RE: Cully's Bianca 6 R150 YVM - Niall - 13-04-2014
2nd the love for the stock exhaust. Sounds great, quiet when needed and goes well. Wish I never sold my quite new genuine one!
RE: Cully's Bianca 6 R150 YVM - 7057sam - 13-04-2014
(13-04-2014, 12:11 PM)Niall Wrote: 2nd the love for the standard exhaust. Sounds great, quiet when needed and goes well. Wish I never sold my quite new genuine one!
Totally agree with this sold pretty much new psa system off the astor.
seriously regret it now,forgot how much time I spend at 3k,god the drone!!
RE: Cully's Bianca 6 R150 YVM - eddy_gti6 - 13-04-2014
It drones because 2.5" is too big of a pipe for a standard engine. Mine isnt too bad to be honest but my astor had a 2.25" straight through middle section with scorpion back box with decat. Sounded awesome
RE: Cully's Bianca 6 R150 YVM - 7057sam - 13-04-2014
(13-04-2014, 12:28 PM)eddy_gti6 Wrote: It drones because 2.5" is too big of a pipe for a standard engine. Mine isnt too bad to be honest but my astor had a 2.25" straight through middle section with scorpion back box with decat. Sounded awesome
Yeah only time I prefer the magnex is really high up the rev range and the tailpipe looks the nuts
RE: Cully's Bianca 6 R150 YVM - cully - 13-04-2014
suns out!
I parked up before being dragged around shopping, and as you do, always turn and looked and took the compulsery selfi
![[Image: bianca%20selfi.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/bianca%20selfi.jpg.html)
RE: Cully's Bianca 6 R150 YVM - mcvite - 13-04-2014
Looks stunning in the sunlight mate
RE: Cully's Bianca 6 R150 YVM - Tom - 13-04-2014
Such an awesome looking car!
RE: Cully's Bianca 6 R150 YVM - Niall - 13-04-2014
Looks shit. Would you great with Gunmetal Turinis. Funnily enough, i know a guy who would happily do a straight swap for your wheels
RE: Cully's Bianca 6 R150 YVM - Ben - 13-04-2014
Looks great, I'm rather jealous! I'm sure it will be well worth all the effort you've put in when you go on your 'ring' trip. Looks like a good upgrade those bushes, did you order any Partner P bushes or did they have to be a certain year/model?