+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: White phase 1, now with added truck turbo and massive head gasket failure (/showthread.php?tid=7846)
RE: White phase 1, now with added truck turbo and dyno results - fan2xud - 06-02-2013
A nice project ahead, beautiful spec has come !!
200hp, this is a stage 2,
Good thing this is not a block DHY for more 200Hp, HaHa,,,
RE: White phase 1, now with added truck turbo and dyno results - Dave - 06-02-2013
Is this a stock block?
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 06-02-2013
(06-02-2013, 10:11 PM)Dave Wrote: Is this a stock block?
currently yeah, just stripped, cleaned and re-assembled with all new gaskets/seals/bearings etc
RE: White phase 1, now with added truck turbo and dyno results - Jimbo - 06-02-2013
Just had a proper read through this. Car looked and sounded awesome at the meet look forward to seeing it the next rr meet where hopefully ill be bringing my dt up.
Keep up the good work
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 06-02-2013
(06-02-2013, 10:42 PM)Jimbo Wrote: Just had a proper read through this. Car looked and sounded awesome at the meet look forward to seeing it the next rr meet where hopefully ill be bringing my dt up.
Keep up the good work
thanks mate, by the next meet itl hopefully be even more awesome. lots of work coming up
RE: White phase 1, now with added truck turbo and dyno results - fan2xud - 06-02-2013
Good luck in advance if I can help you for mapping any info on a turbo or fuel pump, do not hesitate to send a small MP ozonehostile!
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 06-02-2013
(06-02-2013, 11:17 PM)fan2xud Wrote: Good luck in advance if I can help you for mapping any info on a turbo or fuel pump, do not hesitate to send a small MP ozonehostile!
thanks mate
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 10-02-2013
Havnt done much recently due to work commitments, but more coming soon including a couple of purchases from the '6 forum
RE: White phase 1, now with added truck turbo and dyno results - Frosty - 10-02-2013
I look forward to seeing what you got!
RE: White phase 1, now with added truck turbo and dyno results - cwspellowe - 10-02-2013
Looks to be quite laggy from the graph? Still personally think the hotside is too big, if you had the engine revving to 6krpm then fair enough but it doesn't look to be at peak boost until pretty much 3krpm.
Was this not a twin scroller too?
And as said, don't worry about an 11mm until you can get it boosting clean.
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 10-02-2013
(10-02-2013, 10:42 AM)cwspellowe Wrote: Looks to be quite laggy from the graph? Still personally think the hotside is too big, if you had the engine revving to 6krpm then fair enough but it doesn't look to be at peak boost until pretty much 3krpm.
Was this not a twin scroller too?
And as said, don't worry about an 11mm until you can get it boosting clean.
It certainly does need more revs to get the most from the turbo, gov mod is on my to do list. it is a twin scroll yes, starts spooling quite early but the revs cant build up fast enough to get it boosting hard until about 3k.
il make a vid of it on boost, fiddled a bit with the pump when i got back from the dyno and it seems to be clean on boost now
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 14-02-2013
first of my '6 forum purchases turned up yesterday. i now have a working set and loads of spares all ready to be wired in
gonna be a good weekend
![[Image: IMAG0680_zps7b4c15c1.jpg]](http://i1310.photobucket.com/albums/s649/ozonehostile/IMAG0680_zps7b4c15c1.jpg)
RE: White phase 1, now with added truck turbo and dyno results - sam - 14-02-2013
Nice buy dude
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 21-02-2013
absolutely cant wait for payday this month, so much i want to get done on this, mostly painting things white.
morettes need the masks painting white, bonnet needs doing, new bumper needs doing and i still need to get the dented roof smoothed.
been considering painting the black strip on the front bumper and the splitter white.
will be changing the rad and wiring in all the remaining gauges over the next week and its service time.
oooh and getting some 16" rims from sam so the brembos can finally be fitted along with a cheeky lower to 60mm
RE: White phase 1, now with added truck turbo and dyno results - Frosty - 22-02-2013
I should be coming to the weston meet on Sunday. Looking forward to see this car again
RE: White phase 1, now with added truck turbo and dyno results - sam - 22-02-2013
Whem do you want the mou ts and 16's dude? There all off and have your name rittem all over them
RE: White phase 1, now with added truck turbo and dyno results - richie 87 - 22-02-2013
what headlights you got on at the moment? phase 3s?
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 22-02-2013
Yeah it's got crystals off a phase 3 currently, as I write this however, I am sanding and respraying a pair of phase 1 morette lights
And Sam, I get paid end of next week so will be down to see you not long after. Can't wait for new rims
RE: White phase 1, now with added truck turbo and dyno results - sam - 22-02-2013
Nice one dude
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 22-02-2013
started on the morettes today, all sanded down and ready for painting, never again though, so much sanding!
![[Image: IMAG0722_zps9b7804a4.jpg]](http://i1310.photobucket.com/albums/s649/ozonehostile/IMAG0722_zps9b7804a4.jpg)
![[Image: IMAG0723_zps4e8f2aab.jpg]](http://i1310.photobucket.com/albums/s649/ozonehostile/IMAG0723_zps4e8f2aab.jpg)
RE: White phase 1, now with added truck turbo and dyno results - richie 87 - 23-02-2013
whats the gap like at the bonnet with the phase 3s? they just a straight swap? trying to think of ways to freshen up my phase1 front.
cheers
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 23-02-2013
(23-02-2013, 08:16 AM)richie 87 Wrote: whats the gap like at the bonnet with the phase 3s? they just a straight swap? trying to think of ways to freshen up my phase1 front.
cheers
theres a pretty big gap tbh, doesnt look the best. i originally had a smooth phase 3 grill and bonnet but didnt like the look atall so put it back to phase 1 but kept the lights. i quite like the look tbh but as you can see, there are some pretty big gaps
![[Image: th_IMAG0470.jpg]](http://s1310.beta.photobucket.com/user/ozonehostile/media/IMAG0470.jpg.html)
*if you want to change the front end a bit, i have a smooth phase 1 grill for sale
RE: White phase 1, now with added truck turbo and dyno results - richie 87 - 23-02-2013
hmmm yh i see what you mean.
dunno what il do.
cheers dude
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 23-02-2013
a bit more work on the morettes done this morning, cold weather is a massive pain as it means it takes bloody hours for coats of paint to dry
but still, getting there
![[Image: IMAG0738_zpsd23a2fb2.jpg]](http://i1310.photobucket.com/albums/s649/ozonehostile/IMAG0738_zpsd23a2fb2.jpg)
White phase 1, now with added truck turbo and dyno results - Jonny b - 23-02-2013
Fecking cold is doing my head in too bud!! Want to paint my mo's but
It's fecking cold
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 23-02-2013
yeah, im dying to paint the strips on the sedan too but they will take too long to dry ffs
RE: White phase 1, now with added truck turbo and dyno results - Midnightclub - 23-02-2013
Never heard of halogen heaters? lol
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 23-02-2013
got a heater, but its a fan heater so don't want dust been blown over fresh paint
RE: White phase 1, now with added truck turbo and dyno results - Piggy - 23-02-2013
how good is your perspex sunroof?! does it not make for a lot of noise and leaks?!
RE: White phase 1, now with added truck turbo and dyno results - ozonehostile - 23-02-2013
(23-02-2013, 05:09 PM)Piggy1987 Wrote: how good is your perspex sunroof?! does it not make for a lot of noise and leaks?!
its not finished yet mate, need to get a tophat shape milled around the edges so that it fills the hole perfectly and can be bonded on from the underside