+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Cully's Bianca 6 R150 YVM (/showthread.php?tid=13188)
RE: Cully's Bianca 6 R150 YVM - Tom - 04-01-2014
Needs a bootlid without the strip on the bottom! But damn this car is sexy!
RE: Cully's Bianca 6 R150 YVM - Piggy - 04-01-2014
Daaang she looks fine
RE: Cully's Bianca 6 R150 YVM - WiNgNuTz - 04-01-2014
(04-01-2014, 02:14 PM)Tom Wrote: Needs a bootlid without the strip on the bottom! But damn this car is sexy!
Qft.
Looking good though mate, keep it up!
RE: Cully's Bianca 6 R150 YVM - Grant - 06-01-2014
Great to see this back on the floor again. When we came down to you, its great to see the attention to detail on this!
Can't believe I didn't see the exeter meet this weekend. I was in dulverton all weekend
RE: Cully's Bianca 6 R150 YVM - cully - 09-01-2014
had a good productive day today
i have worked out how to arm and disarm my Std alarm via the new RF key system i installed
for anyone thats interested
http://306oc.co.uk/forum/thread-16717.html
i have also installed my Fog Flash Mod which will brighten up the back roads a little while Hooning
info on this is here
http://306oc.co.uk/forum/thread-143-post-1157.html#pid1157
RE: Cully's Bianca 6 R150 YVM - cully - 18-01-2014
repair day of the chassis leg today
the job that was to much for me, i was right to get someone else to do it, im glade i did as he made an excellent job
credit go's to
Rowleys garage LTD and the work done by Ben
i even took a load of pictures of the proscess he took
i dont think it needs much explaining but the basics were...
clean it up
cut out the rust
make a plate
weld it in
clean it up
seal inside and outside
![[Image: DSCF1174.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1174.jpg.html)
![[Image: DSCF1179.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1179.jpg.html)
![[Image: DSCF1182.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1182.jpg.html)
![[Image: DSCF1188.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1188.jpg.html)
![[Image: DSCF1190.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1190.jpg.html)
![[Image: DSCF1192.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1192.jpg.html)
![[Image: DSCF1197.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1197.jpg.html)
![[Image: DSCF1201.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1201.jpg.html)
![[Image: DSCF1205.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1205.jpg.html)
![[Image: DSCF1206.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1206.jpg.html)
RE: Cully's Bianca 6 R150 YVM - cully - 18-01-2014
![[Image: DSCF1208.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1208.jpg.html)
![[Image: DSCF1211.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1211.jpg.html)
![[Image: DSCF1217.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1217.jpg.html)
![[Image: DSCF1218.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/DSCF1218.jpg.html)
RE: Cully's Bianca 6 R150 YVM - Niall - 18-01-2014
Looks like he has done a really tidy job of that!
RE: Cully's Bianca 6 R150 YVM - Grant - 18-01-2014
Looks like he's left a bit of rust in there still?
RE: Cully's Bianca 6 R150 YVM - Niall - 18-01-2014
(18-01-2014, 04:51 PM)Grant Wrote: Looks like he's left a bit of rust in there still?
Just looks to me like he's ground the weld down.
RE: Cully's Bianca 6 R150 YVM - Grant - 18-01-2014
5th picture down. Looks like the metal has rot on it still. Maybe its just me
RE: Cully's Bianca 6 R150 YVM - cully - 18-01-2014
what looks like rough areas is actually the original underseal that has turned a muddy brown colour
i am very pleased with the work to be honest i wasnt expecting such a good job
ben used plasma cutter to cut out the bad he even un picked the spot welds to remove parts to make the replacement plate fit like the original
RE: Cully's Bianca 6 R150 YVM - Grant - 18-01-2014
Ah fair enough. Was hard to see from the pics. Hard to tell it has even been touched after the seal is on
RE: Cully's Bianca 6 R150 YVM - cully - 18-01-2014
5th picture down was just serface rust which was taken back to clean metal then treated with something like Kurust the panel was still quite substantial
RE: Cully's Bianca 6 R150 YVM - Dum-Dum - 18-01-2014
It is a beautiful job hes done there.
RE: Cully's Bianca 6 R150 YVM - darrenjlobb - 18-01-2014
Who did the work cully?
Done a tidy job, have got a 306 which needs the same doing, only its worse.
Would be interested given looks like a good job...
RE: Cully's Bianca 6 R150 YVM - Matt - 18-01-2014
That's fair tidy work
RE: Cully's Bianca 6 R150 YVM - cully - 18-01-2014
(18-01-2014, 07:14 PM)darrenjlobb Wrote: Who did the work cully?
Done a tidy job, have got a 306 which needs the same doing, only its worse.
Would be interested given looks like a good job...
the garage is run by my mate
the guy that did the work is called Ben who is an employee
http://www.rowleysgarage.co.uk/
i will upload a few more pictures cause it was really a work of art
RE: Cully's Bianca 6 R150 YVM - cully - 18-01-2014
[attachment=12878]
[attachment=12879]
[attachment=12880]
[attachment=12881]
[attachment=12882]
[attachment=12883]
[attachment=12884]
[attachment=12885]
[attachment=12886]
[attachment=12887]
RE: Cully's Bianca 6 R150 YVM - cully - 18-01-2014
[attachment=12888]
[attachment=12889]
[attachment=12890]
[attachment=12891]
RE: Cully's Bianca 6 R150 YVM - Dum-Dum - 18-01-2014
Absolute work of art.
RE: Cully's Bianca 6 R150 YVM - Josh_Quant - 19-01-2014
how come you take your pug to a scooby garage?
nice tidy job though
RE: Cully's Bianca 6 R150 YVM - cully - 19-01-2014
(19-01-2014, 09:22 AM)Josh_Quant Wrote: how come you take your pug to a scooby garage?
nice tidy job though
he is a general garage that specialises in scoobys,
i also know him as a friend and i trust him to do a good job with all my cars
something that seems hard to find in a garage these days
he also has a rolling road and great contacts in motorsport, car building, engine building, and everything inbetween car related
RE: Cully's Bianca 6 R150 YVM - Tom - 19-01-2014
Cough* RR day
RE: Cully's Bianca 6 R150 YVM - Josh_Quant - 19-01-2014
he is a general garage that specialises in scoobys,
i also know him as a friend and i trust him to do a good job with all my cars
something that seems hard to find in a garage these days
he also has a rolling road and great contacts in motorsport, car building, engine building, and everything inbetween car related
[/quote]
yeah sounds fair just thought you would be getting charged top dollar for the work but sounds like that's not the case
RE: Cully's Bianca 6 R150 YVM - cully - 01-02-2014
time for a scary place selfie
![[Image: 1654145_1418149205094233_1368881178_n.jpg]](http://smg.photobucket.com/user/cully/media/bianca%20project/1654145_1418149205094233_1368881178_n.jpg.html)
RE: Cully's Bianca 6 R150 YVM - jammapic - 01-02-2014
Stunner - just need to loose the gash splitter!
JP
RE: Cully's Bianca 6 R150 YVM - cully - 01-02-2014
had a slight issue tonight with her
the drivers window has broken somthing as its tipping forward as it going up
im guessing theres a plastic clip in there or somthing attached to the glass thats broken
another trip to peugeot i suppose
RE: Cully's Bianca 6 R150 YVM - Niall - 01-02-2014
There's a plastic clip in the top of the glass that runs up the back edge. Bet that's broken. They are about £1.50 each and come in a bag of 4 from pug.
RE: Cully's Bianca 6 R150 YVM - cully - 01-02-2014
any idea of the part number niall ?