+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Other Marques (https://www.306oc.co.uk/forum/forumdisplay.php?fid=38)
+--- Forum: Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=39)
+--- Thread: chris_90 106 derv project xsi rep, turbo NAD ;) (/showthread.php?tid=13602)
RE: chris_90 106 derv project, axle refurbishing+New wheels - Danny2009 - 29-10-2013
Never really been a fan of them wheels but I think they will suit the 106
If you need a hand fitting the axle give me a shout
RE: chris_90 106 derv project, axle refurbishing+New wheels - Piggy - 29-10-2013
awesome...I was guna suggest you getting them!
RE: chris_90 106 derv project, axle refurbishing+New wheels - Chris_90 - 29-10-2013
(29-10-2013, 05:54 PM)Danny2009 Wrote: Never really been a fan of them wheels but I think they will suit the 106
If you need a hand fitting the axle give me a shout
I love them think they look pretty good, just hope they suit the car, think it will look good slammed to them
And no worrys will do should be pretty easy as wasn't that long ago I fitted the beam that's on it now.
(29-10-2013, 06:01 PM)Piggy Wrote: awesome...I was guna suggest you getting them!
Great minds think alike?
:Lol:
RE: chris_90 106 derv project, axle refurbishing+New wheels - Chris_90 - 31-10-2013
Small update axle is now rebuilt, set it to 30mm lower than it was (was told it was standard hight) so ready to go on now hopefully won't be long till I get it on as my axle is very scary in the corners
![[Image: DSC_0176_zps68e2837a.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/DSC_0176_zps68e2837a.jpg)
RE: chris_90 106 derv project, axle refurbishing+New wheels - Chris_90 - 04-11-2013
SO saturday night wishbone bush snapped from car
manged to limp it to my mates work shop, was planning on doing the axle on sunday any way. So sunday fitted new wishbone and axle, took 8 hours in total every thing that could go wrong went wrong, when took it off jacks was slammed right up in archs, so had to re adjust the hight still not happy with it but will do for now. Anyway on the test drive it didnt feel right at all felt like the rear end was trying to pull to one side. Thought it was to do with tracking being out due to fitting new wishbone.
So today fitted new track rod end took it to be tracked up on the pc type tracking thing. Back axle is all over place toe in camber etc etc. So got on phone to imaxle (great guys!) for some advice they said try the stub pins see if there bent if not the axle tube must be bent. So took passenger side stub pin out and it was bent swapped it for a known good one out my old axle.
Thats were im at the min had to give up for today as so stressed with it all ready just to give up with the whole thing scrap the f**king thing. So just see what its like when i go to work see if the new stub pin has helped it if not gonna be looking for a new axle tube
RE: chris_90 106 derv project, axle refurbishing=ALL BROKEN! - Piggy - 04-11-2013
at least you know whats wrong...its sortable
RE: chris_90 106 derv project, axle refurbishing=ALL BROKEN! - Tom - 04-11-2013
Now you can charge people to lower axles
chris_90 106 derv project, axle refurbishing=ALL BROKEN! - rocker8742 - 04-11-2013
That's a shitter about the axle buddy I swapped mine over yesterday so have the old one going spare if you can get down this way if its any good to you? It failed mot on swivel joints but I think the tube and bars are all straight
RE: chris_90 106 derv project, axle refurbishing=ALL BROKEN! - Chris_90 - 04-11-2013
(04-11-2013, 07:40 PM)Piggy Wrote: at least you know whats wrong...its sortable
Seems all good now done 78mile at work tonight and it's not twitched on rear end like it did before so looks like it was stub pin, was only bent by about 2/3mm amazing it makes that much difference.
(04-11-2013, 08:08 PM)Tom Wrote: Now you can charge people to lower axles
I did think about this but I always worry something will go wrong. So wouldn't like to do it on other people's cars. But don't mind lending a hand showing people what to do etc least if they brake it it's not my fault
(04-11-2013, 08:41 PM)rocker8742 Wrote: That's a shitter about the axle buddy I swapped mine over yesterday so have the old one going spare if you can get down this way if its any good to you? It failed mot on swivel joints but I think the tube and bars are all straight
Thanks mate but probaly way to far from me plus I got disc disc axle on so wanna try and keep it with disc on now.
In other news it handles extremely well now I have a working arb
Up next lift it up abit then it's gotta get me to Cornwall next week as haveing a few days away
chris_90 106 derv project, axle refurbishing=ALL BROKEN! - rocker8742 - 04-11-2013
I'm on the way to Cornwall buddy
look forward to seeing those wheels on there
RE: chris_90 106 derv project, axle refurbishing=ALL BROKEN! - Chris_90 - 05-11-2013
So been messing with axle again today, finally managed to get the ride hight I want. Pics here from last couple of days.
The broken wishbone
![[Image: DSC_0179_zps695ecd6f.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/DSC_0179_zps695ecd6f.jpg)
![[Image: DSC_0180_zpsb6d81543.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/DSC_0180_zpsb6d81543.jpg)
![[Image: DSC_0181_zpsacea290b.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/DSC_0181_zpsacea290b.jpg)
Old and New track rod ends
![[Image: DSC_0183_zps5a7ec600.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/DSC_0183_zps5a7ec600.jpg)
New hight
![[Image: DSC_0189_zps90dc4ef6.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/DSC_0189_zps90dc4ef6.jpg)
![[Image: DSC_0190_zps5d767524.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/DSC_0190_zps5d767524.jpg)
That's it for now, seems to be ok now on back axle but see how I get on over next few days
Oh and I blocked my first Fuel filter last night lasted 3,000 miles not bad I dont think.
Comments welcome
chris_90 106 derv project, axle refurbishing=ALL BROKEN! - MarkTD - 05-11-2013
(05-11-2013, 02:58 PM)Chris_90 Wrote: So been messing with axle again today, finally managed to get the ride hight I want. Pics here from last couple of days.
The broken wishbone
Old and New track rod ends
New hight
That's it for now, seems to be ok now on back axle but see how I get on over next few days
Oh and I blocked my first Fuel filter last night lasted 3,000 miles not bad I dont think.
Comments welcome
3000 miles ain't bad for what the filters cost.
U made it higher for winter?
RE: chris_90 106 derv project, axle refurbishing=ALL BROKEN! - Chris_90 - 05-11-2013
Not bad for Veg Oil, and yer just for winter be lowering it again next summer (if I still got it)
RE: chris_90 106 derv project, axle refurbishing=ALL BROKEN! - Chris_90 - 06-11-2013
Gave it a wash, polish and wax first time in a long while!
![[Image: DSC_0191_zpsfbcf0ead.jpg]](http://s552.photobucket.com/user/mazda_323f/media/DSC_0191_zpsfbcf0ead.jpg.html)
![[Image: DSC_0192_zps6d956814.jpg]](http://s552.photobucket.com/user/mazda_323f/media/DSC_0192_zps6d956814.jpg.html)
![[Image: DSC_0193_zps67d79a22.jpg]](http://s552.photobucket.com/user/mazda_323f/media/DSC_0193_zps67d79a22.jpg.html)
![[Image: DSC_0194_zps310473ce.jpg]](http://s552.photobucket.com/user/mazda_323f/media/DSC_0194_zps310473ce.jpg.html)
Not looking to bad if i say so my self, just the wheels and bonnet let it down quite alot. bring on next summer when i can slam it and fit the 205 alloys
RE: chris_90 106 derv project xsi rep, Clean :) - me-tm - 06-11-2013
If only that was a Peugeot 107 in the background instead of a Citroen C1.
RE: chris_90 106 derv project xsi rep, Clean :) - Danny2009 - 06-11-2013
Looking good mate
RE: chris_90 106 derv project xsi rep, Clean :) - silverzx - 06-11-2013
Needs some different wheels, otherwise looks all reeeet!
RE: chris_90 106 derv project xsi rep, Clean :) - Chris_90 - 06-11-2013
(06-11-2013, 12:15 PM)silverzx Wrote: Needs some different wheels, otherwise looks all reeeet!
Yer will have different wheels next year
the 205 ones few pages back. But I like the oem look at the min (06-11-2013, 12:11 PM)Danny2009 Wrote: Looking good mate
Thanks
RE: chris_90 106 derv project xsi rep, Clean :) - Chris_90 - 09-11-2013
Update
Serviced it yesterday 4 time since I bought it least I no it's well serviced
Considering keeping it a oem xsi, really liking the look of it at the moment plus how nice it it's over bumps and not to worry about ripping exhaust off all time lol. Not sure if to refurbish the Xsi wheels or put the 205 alloys on next year or not. Not made my mind up.
What you guys think?
RE: chris_90 106 derv project xsi rep, Clean :) - Danny2009 - 09-11-2013
I think you should sell them both and buy my minilites tbh
chris_90 106 derv project xsi rep, Clean :) - rocker8742 - 09-11-2013
If be interested to see what the 205 wheels look like on it so think you should do that then I can buy myself a set
RE: chris_90 106 derv project xsi rep, Clean :) - Chris_90 - 10-11-2013
(09-11-2013, 05:47 PM)Danny2009 Wrote: I think you should sell them both and buy my minilites tbh
Think they would look good but carnt justfi spending that much on wheels lol
(09-11-2013, 10:02 PM)rocker8742 Wrote: If be interested to see what the 205 wheels look like on it so think you should do that then I can buy myself a set
Think i will still put them on just be a while yet as gotta get this though mot yet and i can see it costing a fair few quid
RE: chris_90 106 derv project xsi rep, Clean :) - sam - 10-11-2013
Why did you raise it for winter?
chris_90 106 derv project xsi rep, Clean :) - rocker8742 - 10-11-2013
Know the feeling mate mines just cost 200 to get through its mot
RE: chris_90 106 derv project xsi rep, Clean :) - Chris_90 - 10-11-2013
(10-11-2013, 09:07 AM)sam Wrote: Why did you raise it for winter?
Cos i can
nah i fitted them -20/30mm springs on front so the arse has been sat down for a while, just lifted rear to match for now. More for the smooth ride than any thing else, might look in to lowering it next year again if i still have it. (10-11-2013, 09:39 AM)rocker8742 Wrote: Know the feeling mate mines just cost 200 to get through its mot
hoping mine wont be to bad with the amount of stuff ive replaced
chris_90 106 derv project xsi rep, Clean :) - rocker8742 - 10-11-2013
Mine turned out to be mainly bushes, beam and rear brakes
I'm being too lazy to read through did you get your refurbed beam on in the end?
RE: chris_90 106 derv project xsi rep, Clean :) - Chris_90 - 10-11-2013
(10-11-2013, 11:22 AM)rocker8742 Wrote: Mine turned out to be mainly bushes, beam and rear brakes
I'm being too lazy to read through did you get your refurbed beam on in the end?
Refurbished my own beam, it's had most parts replaced wishbones track rod ends, all 4 shocks, flexis on back etc etc
Just needs flexis on front a bit of welding and hopefully that should be ok for mot. Will see soon tho once I get back off holiday will be getting it booked in
RE: chris_90 106 derv project xsi rep, Clean :) - rd070707 - 10-11-2013
Get it slammed on the speedlines for god sake! Lol
chris_90 106 derv project xsi rep, Clean :) - rocker8742 - 10-11-2013
Hope it goes well then mate just turn the fuel down a bit
RE: chris_90 106 derv project xsi rep, Clean :) - Chris_90 - 10-11-2013
(10-11-2013, 11:45 AM)rd070707 Wrote: Get it slammed on the speedlines for god sake! Lol
maybe one day (10-11-2013, 11:50 AM)rocker8742 Wrote: Hope it goes well then mate just turn the fuel down a bit
It hardly smokes on the Veg Oil just a slight haze so think it will be ok. As long as the petrol in the mix don't cause it any issues