![]() |
Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Sean's Diablo HDi Stage 2 168bhp & 290lbsft (/showthread.php?tid=5120) |
RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Dum-Dum - 19-02-2013 (18-02-2013, 10:39 PM)Just Sean Wrote: Took Samass out and dum dum took me out. So you gonna let me look after your car while your away if I promise not to scrap it? ![]() RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 22-02-2013 ![]() Well happy with the buckets. Really comfy too! Next up is some cage and some flocked dash!! RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Midnightclub - 22-02-2013 Rear seats are sound deadening getting stripped out? It does make a nice difference and you'd love the noise RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 22-02-2013 Theirs no noise from the rear so the seats are staying. I still want it to be a comfy cruiser Lol! RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - sam - 22-02-2013 Get them gone there dead weight if you not useiing them and they make a difference dude ![]() RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Arron - 22-02-2013 If you've gone for buckets may swell strip the seats behind bud. Imo.. can see lots of work has gone into this RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 22-02-2013 No no no and no! Theirs no need. Give me one good reason RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - samass - 22-02-2013 Drive it stripped out once, hard, and you'll never look back. Guarantee. RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 22-02-2013 I've got too much shit in the back. I dont need any acceleration gains from removing the seats. Its not happening!! ![]() RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Arron - 22-02-2013 Just hang a fishnet off the roll age your going to put in.... hahaha!!! Its just me, if I see buckets in a car I always think it then needs stripping and a cage. RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Ruan - 22-02-2013 Trust me, once you strip, you won't go back, especially with buckets... The noise, the feeling everything, ungh!!! Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Jonny b - 22-02-2013 Just strip it already ya big girl!! Or does unc have to lay the slap down!!! Lol RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 22-02-2013 ![]() ![]() ![]() Is a GDI which doesn't have an exhaust note. If it was a petrol it would be stripped! But its not, and it isn't! Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Jonny b - 22-02-2013 Ha ha ya big bitch RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 22-02-2013 Lol! Thanks unc! RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Jonny b - 22-02-2013 looks sweet with the mo's!!! whats up with your rear bumper? RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 22-02-2013 Warped from where I ran with no exhaust! ![]() Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Jonny b - 22-02-2013 Gutted RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Ruan - 22-02-2013 You've never experienced a proper Diesel if you claim yours doesn't have an exhaust note... RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 22-02-2013 ^this! Am getting a 3" system made up for it when I get back so hopefully I can change that! RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 20-03-2013 So ive bought some bits for the car... Black masks 406 auto dimmer Carbon wrapped Mirror caps and spoiler (match the bonnet n grill) and might be getting some tarox 4pots. RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - rd070707 - 20-03-2013 what diameter is your exhaust tip? RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 20-03-2013 urm. 3.5 inch i think. inward rolled. RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - rd070707 - 20-03-2013 I couldnt decide between 3'' or 3.5'' lol. 3.5 it is RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - sam - 20-03-2013 Need a colour coded bonnet but smoothed though ![]() RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 20-03-2013 the whole sysyem will be for sale in july... RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - rd070707 - 20-03-2013 no im good dude just buying a tip... then at some point hopefully do a 3'' full stainless RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 20-03-2013 (20-03-2013, 07:52 PM)sam Wrote: Need a colour coded bonnet but smoothed though Yeah mate! I was gonna colour code, but the wrapped wing mirrors and spoiler came up for sale! Will roll with it for a bit! Just collecting mass parts atm... ![]() RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - sam - 20-03-2013 Ahhh makes sence chap colour code the grill RE: Sean's Diablo HDi Stage 2 168bhp & 290lbsft - Just Sean - 27-03-2013 So complied a list of things to do... Need to get majority done before FCS... anyone wanna come lend a hand in the evenings feel free!! Fob Bulbs (h7/100W Bulbs) E-PAS Shorter aux belt Re Map Mr Whippy (after fuel mods) 2.75" home made exhaust system R70 fuel pump - 2.2 peugeot/citroen or bmw 072 injectors Fit black masks or Carbon masks Fit 406 auto dimmer Paint and fit 4 pots yellow Paint rear brakes yellow Fit wind protectors Fit new boost gauge (mocal) Buy and fit dual oil temp/oil pressure gauge (mocal) Cambelt New bulbs for black masks Flock Dash (centre console/a,b,c pillars) Fit mirror caps Fit spoiler Re-trim buckets (alcantra with yellow stictching/detail) Meyle HD Wishbone and drop links Topmounts. Suspension Plasma dials |