+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Project 16v #theLEMOAN (/showthread.php?tid=33471)
Project 16v #theLEMOAN - bashbarnard - 29-08-2017
Ohhh we are nearing it now then
Sent from my iPhone using Tapatalk
RE: Project 16v #theLEMOAN - Piggy - 29-08-2017
MOT day tomorrow. Dropped it off this evening....promptly lost 1st, 2nd, 5th and reverse on route...
Guesses as to why?
RE: Project 16v #theLEMOAN - Eeyore - 29-08-2017
(29-08-2017, 09:58 PM)Piggy Wrote: MOT day tomorrow. Dropped it off this evening....promptly lost 1st, 2nd, 5th and reverse on route...well thats everything that isnt straight on the gear stick so i presume one of the linkages popped off.
Guesses as to why?
RE: Project 16v #theLEMOAN - Piggy - 30-08-2017
RE: Project 16v #theLEMOAN - Eeyore - 30-08-2017
Noice.
RE: Project 16v #theLEMOAN - dr_jekyll - 30-08-2017
You not got the clips locking them in???
Sent from my SM-G920F using Tapatalk
RE: Project 16v #theLEMOAN - Piggy - 30-08-2017
(30-08-2017, 11:56 AM)dr_jekyll Wrote: You not got the clips locking them in???
Sent from my SM-G920F using Tapatalk
Yeah I do.... Have a feeling my adapter ball is too small. Lol
It passed. Need new drivers seat though really.
Here is to getting it mapped next. New brakes. New rear beam and some tidying in engine bay
RE: Project 16v #theLEMOAN - dr_jekyll - 30-08-2017
(30-08-2017, 03:09 PM)Piggy Wrote:Thats alright then. Had one made from lockwire for a while [emoji23] was gonna suggest it as a get out of jail(30-08-2017, 11:56 AM)dr_jekyll Wrote: You not got the clips locking them in???
Sent from my SM-G920F using Tapatalk
Yeah I do.... Have a feeling my adapter ball is too small. Lol
It passed. Need new drivers seat though really.
Here is to getting it mapped next. New brakes. New rear beam and some tidying in engine bay
Sent from my SM-G920F using Tapatalk
RE: Project 16v #theLEMOAN - welshpug - 30-08-2017
they stay on fine without the extra clip tbh so must be a wrong size ball if its not stock.
RE: Project 16v #theLEMOAN - Piggy - 30-08-2017
(30-08-2017, 03:53 PM)welshpug Wrote: they stay on fine without the extra clip tbh so must be a wrong size ball if its not stock.
Yeah think I had it machined just a fraction too small
RE: Project 16v #theLEMOAN - Dave - 02-09-2017
Mole grips, crimp socket closed a tweak pop back on job done :p
RE: Project 16v #theLEMOAN - Piggy - 02-09-2017
(02-09-2017, 04:07 AM)Dave Wrote: Mole grips, crimp socket closed a tweak pop back on job done :p
I had to read that more than once
Popped it onto OEM ball and it's fine....no clip though which is odd... Must have fallen out ... again odd. Anyone know if can buy the clips by them selves?
Obligatory picture...
RE: Project 16v #theLEMOAN - Piggy - 02-09-2017
https://youtu.be/4DZFhgPqkEU
RE: Project 16v #theLEMOAN - Piggy - 22-09-2017
This is running. Next step tuning and adding the happy stuff....boost and fuel.
Weird issue at 3k rpm where preinj stops. Hoping it's just rings seating in...needs miles on it. Crap to start when cold too.
EMP gauge keeps failing...keeps gunkng up despite filter in line.
RE: Project 16v #theLEMOAN - Danny Wideboy - 24-09-2017
Good news.
Keep the updates coming.
RE: Project 16v #theLEMOAN - Piggy - 24-09-2017
"Custom gauge pod"
RE: Project 16v #theLEMOAN - HDi--Power - 28-09-2017
Are you using the filter setup i sent you with the gauge? There was never one piece of soot that got into the post filter line with that setup, I did find the lawnmower style inline filters to be useless though
RE: Project 16v #theLEMOAN - Magenta Sunset - 28-09-2017
(24-09-2017, 11:42 AM)Piggy Wrote: "Custom gauge pod"
has a certain "je ne sais quoi"!
RE: Project 16v #theLEMOAN - Piggy - 28-09-2017
(28-09-2017, 08:31 PM)HDi--Power Wrote: Are you using the filter setup i sent you with the gauge? There was never one piece of soot that got into the post filter line with that setup, I did find the lawnmower style inline filters to be useless though
Yes pal...just for initial running I couldn't get the filter inline... Was an obvious mistake.
Got a replacement filter on the way. But have that filter now inline. Hope to clean things out post filter. Gauge works...but very slow and needle gets stuck
RE: Project 16v #theLEMOAN - HDi--Power - 28-09-2017
Just clean out the gauge fitting with some brake clean and blow it out with the compressor, will go back to normal then. No filter at all and they last about 5 mins
Emp in the bottom of the filter and then the line to the gauge out the top, this lets the water condense in the filter itself and keeps everything working perfect
RE: Project 16v #theLEMOAN - Piggy - 28-09-2017
Ahh good idea... About having it vertically!
Thankyou
RE: Project 16v #theLEMOAN - Piggy - 05-10-2017
Gauge finally sorted .. went to Mickys to use airline. Used some machine oil.
Got a few odd issues. Cooling being one. The brand new (but cheap non OEM quality) radiator maybe at fault. Considering a 200sx one like before and improve air flow. Tried different stat/open one. .. same. It's not pressurising....just gets hot quick on a power pull.
Horrific starting. And fuel limits. Maybe connected.
Sneak pic.....
Project 16v #theLEMOAN - bashbarnard - 06-10-2017
Sweet looking rims man
Sent from my iPhone using Tapatalk
RE: Project 16v #theLEMOAN - Piggy - 07-10-2017
This is flipping cursed.
Key has gone walkies.
RE: Project 16v #theLEMOAN - Matt-Rallye - 07-10-2017
I bet ziggies eaten it
Top job on getting MOT etc sorted out. Looks hopeful to be on track etc next year at this rate
RE: Project 16v #theLEMOAN - Piggy - 09-10-2017
These arrived. Cheered me up.
Still no key
RE: Project 16v #theLEMOAN - Eeyore - 10-10-2017
such spacer. much wideness
RE: Project 16v #theLEMOAN - Piggy - 10-10-2017
(10-10-2017, 10:31 AM)Eeyore Wrote: such spacer. much wideness
Indeed there will be... 8" rims, 215 tyres. .....
RE: Project 16v #theLEMOAN - welshpug - 10-10-2017
guessing ford fit wheels? interesting to hear how you get on and if they fit in the arches.
RE: Project 16v #theLEMOAN - Piggy - 15-10-2017
Compression test today.... Not terrible, not perfect. No real figures to compare to.
Also found 3 dead glow plugs.
May have cooling system under control too.
Here is to boost control and moar fuel