+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Cully's Bianca 6 R150 YVM (/showthread.php?tid=13188)
RE: Cully's Bianca 6 R150 YVM - silverzx - 28-09-2013
So what, shes off the road for winter or!?
RE: Cully's Bianca 6 R150 YVM - cully - 28-09-2013
(28-09-2013, 12:36 PM)silverzx Wrote: So what, shes off the road for winter or!?
dont know how long yet but its a good time to stagger the tax from the other cars
and also gives me an excuss to pull it to bits and check the front end
RE: Cully's Bianca 6 R150 YVM - Jonny b - 28-09-2013
Love how your going to town on this chap!! Can see this being one of the best examples out there!!
RE: Cully's Bianca 6 R150 YVM - devils_fuel - 28-09-2013
(28-09-2013, 04:19 PM)Jonny b Wrote: Love how your going to town on this chap!! Can see this being one of the best examples out there!!
Seconded this will be a tidy car with all niggles and annoying things fixed
And I was joking about the body form wings
RE: Cully's Bianca 6 R150 YVM - cully - 28-09-2013
lol
so while it rains i rebuild an engine package for it and when the sun comes out i take the car to bits
RE: Cully's Bianca 6 R150 YVM - cully - 04-10-2013
hmmm do i spend my time and money on an engine dress up kit for bling lols
????
RE: Cully's Bianca 6 R150 YVM - Dum-Dum - 04-10-2013
Only if you want to spend your life polishing it.
RE: Cully's Bianca 6 R150 YVM - cully - 04-10-2013
(04-10-2013, 05:31 PM)Dum-Dum Wrote: Only if you want to spend your life polishing it.
and i dont spend most of the time trying to keep it white now!
white cars and country roads dont mix very well
RE: Cully's Bianca 6 R150 YVM - Dum-Dum - 04-10-2013
(04-10-2013, 05:35 PM)cully Wrote: white cars and country roads dont mix very well
LOL your telling me, mine is a distinct shade of grey at the moment
RE: Cully's Bianca 6 R150 YVM - Carlos182 - 04-10-2013
(04-10-2013, 05:45 PM)Dum-Dum Wrote: LOL your telling me, mine is a distinct shade of grey at the moment
And this is where I win
RE: Cully's Bianca 6 R150 YVM - Dum-Dum - 05-10-2013
(04-10-2013, 10:22 PM)Carlos182 Wrote:(04-10-2013, 05:45 PM)Dum-Dum Wrote: LOL your telling me, mine is a distinct shade of grey at the moment
And this is where I win
Yeah every non 306 enthusiast assuming that your car is a very dirty black one, defo winning lol
RE: Cully's Bianca 6 R150 YVM - cully - 09-11-2013
The sun is out so its outdoor jobs today!
i have been threatening to do it for a while now one side of the front don't have an arch liner, i wanted to check the condition and give the underseal a new coat of paint as it looked damaged in places
can you tell which side didn't have the liner??
yup N/Side is packed with mud!
but the O/Side may need a patch as it feels soft need to get in there with a wire brush and strip back the scabs.
lots of tar to get off from the side without the arch liner before painting
so wire brush kurust and paint is the order in the near future
RE: Cully's Bianca 6 R150 YVM - procta - 09-11-2013
that needs a phase 1 front end.
RE: Cully's Bianca 6 R150 YVM - Tom - 09-11-2013
Hahahahaha man that arch is lagged!
RE: Cully's Bianca 6 R150 YVM - bigcheez2k3 - 09-11-2013
Probably how my drivers arch is going to look when I get round to changing the wing.
RE: Cully's Bianca 6 R150 YVM - puglove - 10-11-2013
Bloody hell has some one been off roading in it??
RE: Cully's Bianca 6 R150 YVM - Sian - 11-11-2013
Can come clean mine if you want cully been sat there for a month haha!
RE: Cully's Bianca 6 R150 YVM - cully - 16-11-2013
been poking around the front archs ive found some Holes!
so ive cleaned back to good metal and welded in a plate
must be double skined there as it didnt burn through on fire watch
have also cleand back the passenger side and it looks good quick coat of Kurust to slow the brown evil
will have to do the drivers side tomorrow as the light is begining to go now
dark nights Great!
bet it rains tomorrow!
RE: Cully's Bianca 6 R150 YVM - silverzx - 16-11-2013
Oooh, good job mate! (:
Cully's Bianca 6 R150 YVM - Jtrigga - 16-11-2013
Love how much attention to detail that you do.
RE: Cully's Bianca 6 R150 YVM - cully - 18-11-2013
Hmmm think ive found something earlyer i didnt want to find
will investigate further tomorrow and report back
its another common 306 failure though
RE: Cully's Bianca 6 R150 YVM - Jenkosowls - 19-11-2013
Passenger rear arch?
RE: Cully's Bianca 6 R150 YVM - cully - 19-11-2013
(19-11-2013, 01:17 AM)Jenkosowls Wrote: Passenger rear arch?
no ive already been through the rear arches and given then a coat of paint and some good arch liners.
pictures of that were back a few pages
RE: Cully's Bianca 6 R150 YVM - cully - 19-11-2013
yup my suspicions were correct !
Top engine mount chassis cup is broken!
i cant find the bits of metal that are missing, the mount has what looks like a large washer so i think its been bodged before!
RE: Cully's Bianca 6 R150 YVM - Jenkosowls - 19-11-2013
(19-11-2013, 08:13 AM)cully Wrote:(19-11-2013, 01:17 AM)Jenkosowls Wrote: Passenger rear arch?
no ive already been through the rear arches and given then a coat of paint and some good arch liners.
pictures of that were back a few pages
Thread moves pretty quick so lose track of where its at! Will be a tidy example by the time you've completed it!
RE: Cully's Bianca 6 R150 YVM - mr_fish - 19-11-2013
Did you notice anything when driving?
Bit of a pain but you'll now know it's done, when you sort it.
RE: Cully's Bianca 6 R150 YVM - cully - 19-11-2013
(19-11-2013, 12:09 PM)mr_fish Wrote: Did you notice anything when driving?
earlyer in the thread i was saying the backend was skitish and loose coming off the throttle
im wondering if this is the cause engine moving transfering the weight around
thoughts ?
ive cut out a cardboard templet and a thin steal one for a templet of the cup
so im on the hunt in work tonight for some 3-4mm steal plate to cut a section out off
RE: Cully's Bianca 6 R150 YVM - cully - 19-11-2013
i couldnt find any 3-4mm plate so ive bashed one out of 5mm plate
the bugger won't break again
formed the rough shape will have to offer it up now to fine tune it with a big hammer
RE: Cully's Bianca 6 R150 YVM - Tom - 19-11-2013
Yay big hammer ftw!!
RE: Cully's Bianca 6 R150 YVM - mr_fish - 20-11-2013
(19-11-2013, 12:19 PM)cully Wrote:(19-11-2013, 12:09 PM)mr_fish Wrote: Did you notice anything when driving?
earlyer in the thread i was saying the backend was skitish and loose coming off the throttle
im wondering if this is the cause engine moving transfering the weight around
thoughts ?
I had that white ph1 DT that had a broken mount. and apart from a bit of a knock up the front (thought it was a wishbone bush) it felt funny coming off the throttle.
As you say, come off the throttle, engine tries to move a bit and the inertia creates that feel. Would be increased in a GTI due to the engine being heavier?