![]() |
Houdini brake pads - URGENT! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: Houdini brake pads - URGENT! (/showthread.php?tid=13525) Pages:
1
2
|
Houdini brake pads - URGENT! - Poodle - 04-05-2013 My car has found a fun new game - it will wait until i'm doing 70 and then drop an osr brake pad. This leaves me with the bum-twitchingly exciting challenge of stopping the car, crucially without using the piston to punch a hole through the disc... This has happened three times in the last day, the brand new fixing kit i fitted this morning has magically disappeared along with the latest - also brand new - brake pad to escape, someone please tell me what the f*ck is going on. As far as i'm concerned the car is unusable until i solve this little issue, so really need it sorted before work on Tuesday morning, please help! RE: Houdini brake pads - URGENT! - cully - 04-05-2013 fit the fixing kit properly! RE: Houdini brake pads - URGENT! - Poodle - 04-05-2013 Cheers Cully, can't believe i didn't think of that! What gets me is the first pad to escape - yesterday evening - has been fitted and behaving just fine for three months of good, solid thrashing. And suddenly they've started dropping out at, well, at the drop of a hat lol. RE: Houdini brake pads - URGENT! - cully - 04-05-2013 this may help RE: Houdini brake pads - URGENT! - Poodle - 04-05-2013 Again, tremendously helpful... ![]() RE: Houdini brake pads - URGENT! - rocker8742 - 04-05-2013 Did you have the split pins in the back of the caliper mate? martyns car did this on the eurotrip as he didnt have them.. The pad was sat at 90* to the calliper was bodged with some speaker wire ![]() RE: Houdini brake pads - URGENT! - Poodle - 04-05-2013 Split pins in the back of the caliper...? Pics? RE: Houdini brake pads - URGENT! - Niall - 04-05-2013 yeah sounds stupid but are you putting the split pin in the pad retainer on the bolt side and not on the other side? Cully has it right in the pic above if you dont quite get what im saying. if its the other way round and the split pin is in the opposite side to the bolt, it can still slide out. RE: Houdini brake pads - URGENT! - cully - 04-05-2013 ![]() not smug at all RE: Houdini brake pads - URGENT! - rocker8742 - 04-05-2013 ![]() ![]() RE: Houdini brake pads - URGENT! - Niall - 04-05-2013 Wow that is bodgetacular! RE: Houdini brake pads - URGENT! - Poodle - 04-05-2013 You guys are actually serious aren't you, ok... Thought you were trolling. :p Thanks for the advice, but i understand how the fixing kit works lol, done this just a few times before. ![]() RE: Houdini brake pads - URGENT! - Niall - 04-05-2013 well have to check. you are norther.....oh wait. RE: Houdini brake pads - URGENT! - rocker8742 - 04-05-2013 Northern? that bodge was done by northerners ![]() RE: Houdini brake pads - URGENT! - Poodle - 04-05-2013 That's a fairly decent bodge actually, i kinda like it haha! Still doesn't solve my problem though, any other ideas? RE: Houdini brake pads - URGENT! - 4WayDiablo - 04-05-2013 Wouldn't be missing the L shaped thingy that sits between the caliper and both pads at the bottom. Usually have to tap it in? The pads come out fairly easy without that there RE: Houdini brake pads - URGENT! - martyn92 - 04-05-2013 I promise my car is still not like that... ![]() RE: Houdini brake pads - URGENT! - Dum-Dum - 04-05-2013 The calipers/pads are a terrible design. Maybe retrofit a set from a newer 307 or something RE: Houdini brake pads - URGENT! - Rippthrough - 04-05-2013 If you put the retainer in the wrong way around it WILL fall out. RE: Houdini brake pads - URGENT! - Jonny81191 - 04-05-2013 (04-05-2013, 06:26 PM)martyn92 Wrote: I promise my car is still not like that... Jesus christ mate, get it sorted already! That was a temporary bodge to get you home ![]() RE: Houdini brake pads - URGENT! - Poodle - 04-05-2013 Phil, that's part of the pad retaining kit. Chris, i don't have pockets that work like yours. ![]() Other Phil, it was definitely round the right way lol. RE: Houdini brake pads - URGENT! - Rippthrough - 04-05-2013 If it was, they shouldn't have fallen out ![]() RE: Houdini brake pads - URGENT! - samass - 05-05-2013 Chemical metal. Done. RE: Houdini brake pads - URGENT! - Poodle - 05-05-2013 Exactly, hence the thread lol! When i fitted the most recent lot of pads, i got hold of them with a pair of pliers and pulled and shook them as much as i could and they didn't budge an inch, they were definitely in there good and proper. Sam, this is not the go-nad. :p I'm guessing it's got everyone else stumped for ideas as well then... ![]() RE: Houdini brake pads - URGENT! - Poodle - 05-05-2013 Had a good look at the caliper - sliders were clean, lubed and free; piston had some minor oxidising, but that's now cleaned and regreased; all boots were intact and clean; all bolts were tight; they haven't even got much built up crap on them because i cleaned them down when i rebuilt the car... I'm still completely in the dark, there's nothing unusual about it at all. I gave up trying to find a problem and just put in another pad and fresh fixing kit. Luckily enough buying stuff through work means this won't be crippling my wallet if it happens again, but it's still not exactly ideal. Oh and a picture of the pads and fixing kit fitted, for all you unbelievers ![]() ![]() Oh yeah, managed to drop my reservoir cap and immediately stand on it, so if anyone has a spare one they fancy sending to me i'd be very grateful. RE: Houdini brake pads - URGENT! - Poodle - 01-07-2013 Someone mentioned this to me the other day, thought i'd update the thread. This hasn't happened again since the third time, so i guess i've fixed the problem... All i did was clean and regrease the piston, based on that evidence i can only assume that this was causing the issue. RE: Houdini brake pads - URGENT! - Rippthrough - 03-07-2013 (04-05-2013, 05:06 PM)Niall Wrote: Wow that is bodgetacular! 's also binding the pads themselves... ![]() RE: Houdini brake pads - URGENT! - Grant - 03-07-2013 This seems to be a re-occurring thing with 205's, its not the first I've seen. What the hell are you 205 boys doing?! haha RE: Houdini brake pads - URGENT! - Poodle - 08-07-2013 This was on the 306 mate, but yeah, pretty random. RE: Houdini brake pads - URGENT! - Piggy - 08-07-2013 just a shockingly dumb design. a pug afterthought |