306oc - Peugeot 306 Owners Club & Forum

So heres my SLDT that I picked up on Monday for £450 with a full tank of fuel, nearly a years tax and about 9 months MOT.

She has some issues and im discovering more by the day including now that I've changed the fuel filter and shes back to full power the clutch is slipping.

However she is running a T2 and a bosch with a little bit of a tune.

Heres a few pics, cant believe how high she is compared to the 6

[attachment=3310]
[attachment=3311]
[attachment=3312]



Plans are ph3 front end with fogs (someone come and swap fogs for my rallye blanks), Clones, a HDi box, meridian half leathers, 405 spoiler, maybe a little cheeky lowering then more power (maybe in the form of a 2.1TD) and hopefully a set of electric window doors.

Can we have a sub section on this forum under projects for dum dums projects?

Should look mint

I have a set of front and rear elec window motors if you are interested out of a phase 3 but can supply you all plugs switches exc :p

good plans, should be epic! Look after this one!

(31-10-2012, 10:38 PM)Niall Wrote: [ -> ]Can we have a sub section on this forum under projects for dum dums projects?

LOL cheeky fucker

(31-10-2012, 10:41 PM)R45_ODV Wrote: [ -> ]Should look mint

I have a set of front and rear elec window motors if you are interested out of a phase 3 but can supply you all plugs switches exc :p

Cheers mate, Im after whole doors as swapping in all the electric bits is a pain in the arse. Looking for someone breaking a ph3 5dr or estate to get the bits i want.

(31-10-2012, 10:31 PM)Dum-Dum Wrote: [ -> ]Plans are ph3 front end with fogs (someone come and swap fogs for my rallye blanks), Clones, a HDi box, meridian half leathers

I have 4 fogs but the brackets are fooked, annoying as I want blanks badly!

Can do you the leathers as you know - pix in my for sale thread ive just put up.

Can also do you a HDI box & I will be selling my gunmetal clones as soon as I lay my hands on some other wheels.

[/quote]

Cheers mate, Im after whole doors as swapping in all the electric bits is a pain in the arse. Looking for someone breaking a ph3 5dr or estate to get the bits i want.
[/quote]

Yh mate i dont blame you its alot easyr im breaking a 5door hdi buy its silver so no good.

Will let you know on the steering wheel boss just watein to see if i win the wheel i want on ebay

Looking good mate. Have fun wiring up the phase three front end.

I've got some Hid's for a ph1 if its still single optics - can do for £20 posted all ballasts and wiring etc 6000k bulbs.

---

Never mind - just seen you're going ph3 front end lol

(31-10-2012, 11:12 PM)Pompey306mark Wrote: [ -> ]Looking good mate. Have fun wiring up the phase three front end.

Easy!

Nice, p3 sedan mmmmm, its gonna look epic!!
I wouldn't do the 405 spoiler tho, don't think it will suit ph3!
I'd either go without or find one like I had on my sedan (see 1st page on project thread) vvvvvv

Don't go phase 3! Keep it phase 1...

I have a couple sets of fogs ph2 and ph3 s take you pick lol

Looks pretty tidy mate, should look good with the '6 front end... You done with '6's now then or planning to get another? I know you get bored easily so probably not

A throttle-bodied GTi6 engined 6-speed phase 3 sedan?

Nope, just another diesel Such a missed opportunity!

(31-10-2012, 10:51 PM)Jonny81191 Wrote: [ -> ]good plans, should be epic! Look after this one!

Cheers mate, i will look after her, already been serviced.

(31-10-2012, 10:56 PM)JJ0063 Wrote: [ -> ]Can do you the leathers as you know - pix in my for sale thread ive just put up.

Can also do you a HDI box & I will be selling my gunmetal clones as soon as I lay my hands on some other wheels.

Mowle is going to pick the leathers up off you, give you them money and bring them down to me as hes picking up something else off the other car. Thought id said that in a PM

I currently look like i have a HDi box and set of clones sorted.

(31-10-2012, 11:03 PM)R45_ODV Wrote: [ -> ]Will let you know on the steering wheel boss just watein to see if i win the wheel i want on ebay

Cheers mate.

(31-10-2012, 11:12 PM)Pompey306mark Wrote: [ -> ]Looking good mate. Have fun wiring up the phase three front end.

Cheers mate, Ive got wiring diagrams. Also gonna swap to a ph3 headlight stalk to work all the headlights properly and hopefully get the fog light wiring swapped to that too. Gonna be alot of soldering lol.

(01-11-2012, 02:59 AM)Oil-burner Wrote: [ -> ]Nice, p3 sedan mmmmm, its gonna look epic!!
I wouldn't do the 405 spoiler tho, don't think it will suit ph3!
I'd either go without or find one like I had on my sedan (see 1st page on project thread) vvvvvv

Had one on my last sedan and it looked boss so im getting another

(01-11-2012, 07:11 AM)THE_Liam Wrote: [ -> ]Don't go phase 3! Keep it phase 1...

Sorry mate, you know im a massive ph3 fanboy

(01-11-2012, 07:58 AM)puglove Wrote: [ -> ]I have a couple sets of fogs ph2 and ph3 s take you pick lol

How much for a set of ph3 posted if all the mounts are intact.

(01-11-2012, 09:51 AM)Curt Wrote: [ -> ]Looks pretty tidy mate, should look good with the '6 front end... You done with '6's now then or planning to get another? I know you get bored easily so probably not

Cheers mate, Im done with GTi6s now, theyer just not fast enough, probably going to go back to looking at kit cars and RWD jap carp seen as itll only be a weekend car now. Looking for something at least 350bhp/tonne.

(01-11-2012, 09:58 AM)c.a.r. Wrote: [ -> ]A throttle-bodied GTi6 engined 6-speed phase 3 sedan?

Nope, just another diesel Such a missed opportunity!

It would be awesome but this is just a cheap daily. Cant afford the £400 a month in fuel I was spending. Means I can afford something properly fast as a second car now once ive saved up a little.

(01-11-2012, 09:58 AM)c.a.r. Wrote: [ -> ]A throttle-bodied GTi6 engined 6-speed phase 3 sedan?

Nope, just another diesel Such a missed opportunity!

Already been done but 3 door conversion.

Cool when me and kris did mine it was all educated guess work. Worked well though.

(01-11-2012, 10:25 AM)Pompey306mark Wrote: [ -> ]Coll when me and kris did mine it was all educated guess work. Worked well though.

Yeah, theres only 5 wires each side and the earths are earth coloured so it wouldnt take too much working out with a multi meter for the other wires but im gonna go off the diagrams.

5 doors, heavy... arn't you against these kind of things Chris

Im'a just trolling! Was looking at sedans before the NAD and really like the look of them! no doubt in your hands it's going to end up quite epic!

Think you'll find this has 4 doors... 5 is still an epic fail

Great plans, hope it turns out great!

Um believe mounts are f*cked on the ph 3 so if i put the ph3 lenses on the ph2 units . Come to a deal on the parts i want from you?

(01-11-2012, 11:28 AM)ginge191 Wrote: [ -> ]5 doors, heavy... arn't you against these kind of things Chris

Im'a just trolling! Was looking at sedans before the NAD and really like the look of them! no doubt in your hands it's going to end up quite epic!

good thing this is a 4dr then lol.

Sedans are EPIC already, im just gonna make it even more epic.

(01-11-2012, 11:30 AM)Curt Wrote: [ -> ]Think you'll find this has 4 doors... 5 is still an epic fail

This

(01-11-2012, 11:34 AM)Chris.M Wrote: [ -> ]Great plans, hope it turns out great!

Cheers mate, shell look totally different within a week hopefully.

(01-11-2012, 12:46 PM)puglove Wrote: [ -> ]Um believe mounts are f*cked on the ph 3 so if i put the ph3 lenses on the ph2 units . Come to a deal on the parts i want from you?

ill knock a tenner off for them?

(01-11-2012, 01:15 PM)Dum-Dum Wrote: [ -> ][quote='ginge191' pid='152639' dateline='1351769316']
5 doors, heavy... arn't you against these kind of things Chris

Im'a just trolling! Was looking at sedans before the NAD and really like the look of them! no doubt in your hands it's going to end up quite epic!

Or scrapped!

I kind miss my Cossack grey sedan now, that velour was damn comfy...

Chris please dont ruin this one. As i said yesterday, this one is mint for its age other than that rust.

(01-11-2012, 08:26 PM)Niall Wrote: [ -> ]Chris please dont ruin this one. As i said yesterday, this one is mint for its age other than that rust.

well you know thats not gunna happen, as wih all the others, this will meet a premature end and head to that scrapheap

Looks like a good replacement '6 engine should drop nicely in there

(02-11-2012, 12:15 PM)samass Wrote: [ -> ]

(01-11-2012, 08:26 PM)Niall Wrote: [ -> ]Chris please dont ruin this one. As i said yesterday, this one is mint for its age other than that rust.

well you know thats not gunna happen, as wih all the others, this will meet a premature end and head to that scrapheap

I very rarely buy cars intending to scrap them, it just kinda happens.
I do intend on keeping this one as getting rid of the last one was a big mistake. Veg prices FTMFW