306oc - Peugeot 306 Owners Club & Forum

Greetings everyone, I'm new here
so, this is my story..

after one winter my wipers stopped working, they were not moving at any setting at all,
I've red some info about cleaning the wiper motor and after i did it it started again, but now i have a strange problem ;d
when i put everything back my wipers started to go wrong direction, by this i mean that they go down at start, stuck there for a while and then go up and stay there (this is for one cycle)

I've got second motor but for right handed vehicle (mine is left handed) and wont fit in the left handed one (due to geometry), so my questions are:

1. what could be the problem of such behavior  of old motor - i made some mistake while putting everything back? or is it some contact/motor fault
2. can i switch the parts of right handed motor --> to left handed motor, so that all the working parts are from right handed motor (which is  the second hand one, but working one)

thanks,

Zura

anyone?

You'll fitted your wipers back on wrong basically.
Need to remove the mechanism.
Turn motor on. Let it rest into neutral.
Then fit the mechanism back on with wipers in place.

(30-08-2016, 02:39 PM)Piggy Wrote: [ -> ]You'll fitted your wipers back on wrong basically.
Need to remove the mechanism.
Turn motor on. Let it rest into neutral.
Then fit the mechanism back on with wipers in place.

thanks!, i did just right, now they go right direction
Thank you again!

Zura