306oc - Peugeot 306 Owners Club & Forum

Hello all, I'm possibly putting all my XUD goodies up for grasp and am just gauging interest at the moment.

Here's what I have-

Oil cooler again ready to bolt on with sandwich plate £80

GTI calipers visible parts painted hammerite yellow £30


eBay side entry intercooler roughly 60cm wide 20 wide £35

GT2052s bolt on setup £250

3" boost pipes and hoses almost enough for a 306 set up £50

Derv doctor inlet adaptor £50

*new- also have a full 5dr leaf pattern half leathers including door cards £50
Pictures upon interest.

What's the paddle like to drive with? Could be interested...

I cant speak for how Max finds his but I got a 4 paddle unsprung and to be fair it isn't that bad to drive. Just judders a bit on pull a ways and takes a little getting use to driving.

Think max's is a 5 paddle so should be a touch smoother than frostys 4 paddle.

Any pics of the front mount set up available pal? Interested.- the forge set up...

Cheers lads Max, pm me best price posted on the cutch

pic of turbo.

(01-12-2013, 07:06 PM)padge Wrote: [ -> ]pic of turbo.

In the xud section theres loads

You selling the 11mm

I've got an unsprung paddle and can say they are hardly any different to the stock clutches.

Yeah unsprung paddles aren't that bad at all to be honest.

Miley the 11mm will be up next week

How much wood u post fmic for mate

The Forge FMIC has sold earlier sorry. Also clutch as provisionally sold pending payement.

I do have the other intercooler with the 2.5" piping?

give you a tenner for the turbro eh eh eh eh.

How much you after for other piping you have and is it all there for a setup

If the clutch doesn't sell does it fit on HDI ? and will it take stage 2 torques?

I would take the brakes..

(06-12-2013, 11:40 AM)mitsirfishi Wrote: [ -> ]If the clutch doesn't sell does it fit on HDI ? and will it take stage 2 torques?

you would need to change the clutch arm and cable bracket to XUD box ones

Oil cooler still available?

Jamie, the pipes came fitted to the car when I bought it but you will need 1 elbow and a reducer for the standard turbo outlet.

Banalad, brakes are still available.

Mitsirfishi, clutch has sold.

Craigus, oil cooler is still available PM me if you want it.


Thanks

Are they in good condition? Everything there to upgrade from my dturbo brakes? And could you pm me a price posted to Ireland?

Just calipers, all move freely including the nipples. The paint work is just painted for what can be seen through the wheels so it's nothing amazing haha.

Pm'd

what type is the aux bracket?? pas on top?

Pics of the side entry.cooler??

(02-12-2013, 08:21 PM)strictly_perv Wrote: [ -> ]The Forge FMIC has sold earlier sorry. Also clutch as provisionally sold pending payement.

I do have the other intercooler with the 2.5" piping?

(09-12-2013, 09:31 PM)Jimbo Wrote: [ -> ]Pics of the side entry.cooler??

just a heads up

When I say side entry cooler I mean side not twin pass as few people PM'd have been confussed. But there's pics on my Slam'dan thread at the beginning.

Right so the 11mm pump is removed now and I will be packing all the bits up tonight so will be ready for a quick dispatch after payements.

I'm dropping the turbo to £250 posted and it will include a boosted XUD inside sticker for the lucky buyer

How much for the 11mm mate?

(09-12-2013, 09:21 PM)Piggy Wrote: [ -> ]what type is the aux bracket?? pas on top?

??

Sorry piggy cars scrapped now