05-02-2012, 04:58 PM
I know this was suggested on .net but wasn't bothered with because it would take work away from traders but seeing as we don't have traders I can't see the problem with it!
Thought it might be a good idea to get a list of members who are willing to help others with works on there cars.
This is not intended as a way for members to make money. It's purely as a way to help other members. If members want to thank you with money then that's their choice but I know I would be happy with a cup of coffee....
important Note
The work that is done by users does not carry a warranty. The whole point of this is enthusiasts helping others that might not be so confident in doing certain works them selfs. People who do these works professionally may offer warranties however most users do not have any insurances so if something does go wrong, this lies between you and the user helping you and does NOT involve the club.
London and South East
Username: Niallharper
Area: Surrey and London
Tools available: most workshop tools including Peugeot planet. Also have a machine polisher
Works I can help with: most workshop services including diagnostics, ecu reprogramming, key reprogramming. Mostly petrol work but will try with diesels! Will do servicing, and pretty much everything (except for cambelts!) can also do machine polishing and detailing.
Username: Dum-Dum (Chris)
Area: Heathrow
Tools available: Most workshop tools (a full roll cab that is taller than I am), service book stamp, arch roller (charge for use of arch roller)
Works I can help with: most mechanical, minor fabrication, XU engine rebuilds, HDi FMIC installs.
Username: Grant
Area: Surrey, Epsom
Tools available: Most workshop tools, sthil ts400, have acces to a 1.5 ton excavator and a kettle.
Can help with: Front end suspension removal and refitting including top mounts, replacement of body panels, wheel refurbing, wiring/soldering, all basic servicing and coffee making duties.
Username: samass
Area: Kingston [South East and South East London}
Tools Available: most tools needed for any 306, plus grinder, hammers, scaffold poles for extending those breaker bars, small mig welder [tho im not very good, has been a while] and ramps, jack, stands.
Work I can help with: I'll help out with pretty much anything, can usually figure it out along the way [aslong as i dont get too blinded by rage lol], but otherwise, basic service stuff for XUD, suspension stuff, brake stuff etc. also willing to just be an extra pair of hands as and when required.
Username: PUGNUT_XS
Area: LONDON/SOUTH EAST
Tools: Own Workshop, 8t Ramp, getting more tools after being robbed!
Services: Most cars, Fully qualified mechanic. If i cant do i know a man who can.
Scotland
Username: me-tm (Matt)
Area: Aberdeen, Aberdeenshire
Tools available: Various things, no power tools but most other stuff. 2 ton trolley jack and axle stands.
Works I can help with: Servicing bicycles. Oh, cars? Erm....
Username: Moonstone2.0
Area: Scotland central belt & York
Tools available: as much as fits in the boot of a 306, favorite tool: 900mm breaker bar
Works I can help with: breaking things, making situations worse, swearing, making tea and using a propane
*tea and coffee are provided by Mrs Moonstone*
Midlands
Username: MarkTD (Mark)
Area: Midlands
Tools available: Basic tools, jack, stands, spanners, etc..
Work I can help with: Audio, Basic servicing (oil, filters, brakes etc), refurbishing alloys, paint work & detailing.
Username: td_dan (Daniel)
Area: birmingham, westmidlands area
Tools available: most tools available
Work I can help with: mainly xud work but dont mind helping on others, can do bosch conversions, cambelt/waterpump changes, rear beam changing, pretty much anything and not scared to get my hands dirty
Username: Diggers
Area: norfolk, norwich, great yarmouth
Tools: most you can think of, mig welder, 3ton Jack. 6ton axel stands, 4 years of sockets spanners and so on, torx sockets male and female. Also diagnosis avaliable
Services: any repairs, any electrical problems, fitting alarms/extras, exhausts, servicing, and MOTs (need to be pre booked)
East Anglia
Username: JJ0063
Area: Dereham/Norwich area - Norfolk
Tools available: Halfords advanced tool kit.. haha & a load of basic workshop tools. Machine polisher (oo-er), ramps & some garage space.
Works I can help with: Most general car maintenance including servicing, I've done a few bits of bodywork inc the usual 306 rusty sunroof patch repairs. Dont mind giving anyone a hand & can always offer lifts places etc.
Username: joe
Area: norwich, norfolk
Tools available: Various things,power tools, full roll cab full of tools, jacks, axle stands, access to peugeot planet software...
Works I can help with: clutches, gearboxes, cambelts, waterpumps, servicing, fitting I.C.E, alternators, starter motors, exhausts, mot failure work, turbo changes.... you name it providing its mechanical i'll do it
works i don't really like getting involved with: interior fiddly crap, painting, unless you want gloss black i'm not touching it
yeah fair rates offered for forum members drop me a pm if you need anything.
South Coast
Username: Poodle
Location: Southampton
Tools: Most tools, including welder, engine crane, press, etc. Also got a PP2000, elm327, MPPS, galletto and scangauge for diags and mapping.
Services: Full mechanical services, will do modification work. Expert in shouting at broken HDi's, general diesel freak. Persistent bugger, love scrap yard visits.
Username: Rich306
Location: Portsmouth
Tools: I have a majority of Mechanics tools, Jack and Axle stands.
Services: I can help with mechanical bits and bobs, I've done most things from Cambelt changes to general replacement of parts.
Things i do charge for: Black Mask services
Username: puggyhdi
Location: Portsmouth
Tools: have access to most tools, including pp2000
Services: can service petrol and diesels, install ICE, can do most work on the engine and other front end work, can deal with most body work but crap at spraying also have access to G3 and a mop, and can make a nice cuppa.
Username: Jo3 - joe
Tools available: pretty much most stuff, slide hammers, ratchets, spanners, air guns, if needed and i ask my boss i can do 4 wheel alligniment and tracking for a fee, 3 ton jack and axle stands torx screwdrivers and few special tools that come in handy.
Works I can help with: well my job is a panel beater/strip fitter/ mechanic, so main job is fixing crashed cars, doing all aspects of suspension, i can strip a car down to a bare shell, and build it back up again, enines in and out, a lot is a bit specialised but i can do it, bleed brakes, and ive also lowerd my own car so i know how to do that.
Username: 4waydiablo
Tools available: most workshop tools
Works I can help with: fixing leaking boost pipes
Username: ginge191
Area: Portsmouth
Tools available: Garage with Most workshop tools, low entry trolley jack.
Works I can help with: 306 Dturbos and Early petrols.
Username: Matt
Location: Bournemouth
Tools: basic workshop tools, axel stands, jacks and access to ramps.
Services: audio installs, panel replacement, most interior stuff, replacement removal fitting, basic xu10 engine work, basic suspension work, removing struts, fitting front springs etc.
Yorkshire
Username: THE_Liam
Area: Leeds, West Yorkshire
Tools available: Basic workshop hand tools, jacks, ramps and stands, MIG welder, power tools, wide selection of large hammers.
Works I can help with: Most general car maintenance including servicing, belts, head gaskets, pump swaps, bushes and joints, beams, and I'm a pretty good welder.
*** I haven't got a lot of free time but I'm happy to help if I can ***
Username: Sam Barker
Area: West/North/South/East Yorkshire (on the boundary of all 4 lol!)
Tools available: Enough for most jobs, welder, engine stand, engine hoist, grinders etc Smallish garage
Works I can help with: Most general car related items, mainly xud stuff! But pretty handy with most things!
Username: Jenkosowls
Location: Rotherham South Yorks
Tools: Most basic tools needed to get by Most jobs major all small. Extensive detailing and valet equipment
Services: Suspension, engine, brakes, bodywork, servicing, gearboxes, clutches and problem solving. + Detailing work from a simple wash to paint corrections and interior valet from simple hoovering to steam cleaning and stain and odour removal and many more. Available most weekends and have a good parts supplier plus many scrap yards near me
https://www.facebook.com/PrestigeAutoCare.Detail
Username: Danny2009
Area: Rotherham
Tools Avaliable: Roll cab full of tools, grinders, welder, engine crane ect
Work I can help with: cambelts, headgaskets, suspension work, wiring, welding, pretty much anything really also have a dry lit workshop with tea making facilities
Ireland
Username: Harky
Area: Northern Ireland - Ballymena
Tools available: Usual basic workshop tools - just let me know in advance
Works I can HELP with: 306 Dturbos - Basic servicing and arsing about!
South West
Username: Foxy-jim (James)
Area: Somerset/ South-West
Tools available: Basic tools, jack, stands, spanners, Slide hammer.
Work I can help with: Rear beam lowering, fiddling about with things!
Username: darrenjlobb
Area: Cornwall
Tools available: Extensive workshop tools / air / pit etc....(also have PP2000 / flashing tools and diag for other models) and lots of injection pump tooling etc.
Works I can HELP with: Most things really, but particully things that burn oil and run positive manifold pressure!
Name: Devils_Fuel (Chris)
Area: Bristol
qualified mechanic and last worked in a garage for living 10 yrs ago, i look after all my cars myself (this is my first derv so still learning but have the basic knowledge) but i get Kris B to do the annoying jobs like timing belts now as he has the knack and is quick at it
I will do light stuff like services etc on my drive or yours but heavy dirty shite i won't do as dont have a ramp and am not going to struggle for a few golden beer tokens.
Username: Ruan
Area: Gloucester
Tools available: Halfords advanced tool kit.. and some jacks etc. I don't have much in the way of tools, but most of my wage goes on tools these days...
Works I can help with: Most general car stuff including servicing, Electronics, I can do various bits and bobs with pumps if I have to, just ask, I can always say no.. Same as Darren really, if it runs on heavy oil and doesn't suck, I can usually do something with it. I can just about bear petrols if I have to, so ask away.
North
Username: Hitchos
Location: Northumberland, North East
Tools: A Hammer lol
Services: Basically If anybody needs advice on what tyres to buy or what sizes fo fit, (im an ex tyre fitter btw), oh i can aso cook
Username: mark_airey
Location: South Lakes, Cumbria
Tools: Extensive collection of most things your likely to need including air tools
Services: Happy to HELP with anything, audio installation, replacing parts, installing new shiny things, making things fit that shouldn't etc, more useful with XUD engine related things than any other engine.
Username: Jonny81191
Area: South cumbria
Tools available: General workshop tools, pretty much all you need for basic car repairs and maintenance. Arc welder with a brazing tool.
Works I can HELP with: Most general servicing and maintenance, just ask me, I can always say no!
(I'm often quite busy but will try and help if needed
Username: MartinL
Location: Cheshire
Tools: Sockets, spanners, jack, axle stand, engine crane, can get my hands on almost anything.
Services: Fully qualified mechanic, 7 years stripping cars, 3 years in a garage.
Specialize in front end suspension, brakes, fiddly jobs
Wales
Username: Seb_Ryan
Location: South Wales
Tools: Lots, (sockets, jacks, welder )anything I dont have I can get.
Services: Anything mechanical. Can do 99.9 of things on most cars
Thought it might be a good idea to get a list of members who are willing to help others with works on there cars.
This is not intended as a way for members to make money. It's purely as a way to help other members. If members want to thank you with money then that's their choice but I know I would be happy with a cup of coffee....
important Note
The work that is done by users does not carry a warranty. The whole point of this is enthusiasts helping others that might not be so confident in doing certain works them selfs. People who do these works professionally may offer warranties however most users do not have any insurances so if something does go wrong, this lies between you and the user helping you and does NOT involve the club.
London and South East
Username: Niallharper
Area: Surrey and London
Tools available: most workshop tools including Peugeot planet. Also have a machine polisher
Works I can help with: most workshop services including diagnostics, ecu reprogramming, key reprogramming. Mostly petrol work but will try with diesels! Will do servicing, and pretty much everything (except for cambelts!) can also do machine polishing and detailing.
Username: Dum-Dum (Chris)
Area: Heathrow
Tools available: Most workshop tools (a full roll cab that is taller than I am), service book stamp, arch roller (charge for use of arch roller)
Works I can help with: most mechanical, minor fabrication, XU engine rebuilds, HDi FMIC installs.
Username: Grant
Area: Surrey, Epsom
Tools available: Most workshop tools, sthil ts400, have acces to a 1.5 ton excavator and a kettle.
Can help with: Front end suspension removal and refitting including top mounts, replacement of body panels, wheel refurbing, wiring/soldering, all basic servicing and coffee making duties.
Username: samass
Area: Kingston [South East and South East London}
Tools Available: most tools needed for any 306, plus grinder, hammers, scaffold poles for extending those breaker bars, small mig welder [tho im not very good, has been a while] and ramps, jack, stands.
Work I can help with: I'll help out with pretty much anything, can usually figure it out along the way [aslong as i dont get too blinded by rage lol], but otherwise, basic service stuff for XUD, suspension stuff, brake stuff etc. also willing to just be an extra pair of hands as and when required.
Username: PUGNUT_XS
Area: LONDON/SOUTH EAST
Tools: Own Workshop, 8t Ramp, getting more tools after being robbed!
Services: Most cars, Fully qualified mechanic. If i cant do i know a man who can.
Scotland
Username: me-tm (Matt)
Area: Aberdeen, Aberdeenshire
Tools available: Various things, no power tools but most other stuff. 2 ton trolley jack and axle stands.
Works I can help with: Servicing bicycles. Oh, cars? Erm....
Username: Moonstone2.0
Area: Scotland central belt & York
Tools available: as much as fits in the boot of a 306, favorite tool: 900mm breaker bar
Works I can help with: breaking things, making situations worse, swearing, making tea and using a propane
*tea and coffee are provided by Mrs Moonstone*
Midlands
Username: MarkTD (Mark)
Area: Midlands
Tools available: Basic tools, jack, stands, spanners, etc..
Work I can help with: Audio, Basic servicing (oil, filters, brakes etc), refurbishing alloys, paint work & detailing.
Username: td_dan (Daniel)
Area: birmingham, westmidlands area
Tools available: most tools available
Work I can help with: mainly xud work but dont mind helping on others, can do bosch conversions, cambelt/waterpump changes, rear beam changing, pretty much anything and not scared to get my hands dirty
Username: Diggers
Area: norfolk, norwich, great yarmouth
Tools: most you can think of, mig welder, 3ton Jack. 6ton axel stands, 4 years of sockets spanners and so on, torx sockets male and female. Also diagnosis avaliable
Services: any repairs, any electrical problems, fitting alarms/extras, exhausts, servicing, and MOTs (need to be pre booked)
East Anglia
Username: JJ0063
Area: Dereham/Norwich area - Norfolk
Tools available: Halfords advanced tool kit.. haha & a load of basic workshop tools. Machine polisher (oo-er), ramps & some garage space.
Works I can help with: Most general car maintenance including servicing, I've done a few bits of bodywork inc the usual 306 rusty sunroof patch repairs. Dont mind giving anyone a hand & can always offer lifts places etc.
Username: joe
Area: norwich, norfolk
Tools available: Various things,power tools, full roll cab full of tools, jacks, axle stands, access to peugeot planet software...
Works I can help with: clutches, gearboxes, cambelts, waterpumps, servicing, fitting I.C.E, alternators, starter motors, exhausts, mot failure work, turbo changes.... you name it providing its mechanical i'll do it
works i don't really like getting involved with: interior fiddly crap, painting, unless you want gloss black i'm not touching it
yeah fair rates offered for forum members drop me a pm if you need anything.
South Coast
Username: Poodle
Location: Southampton
Tools: Most tools, including welder, engine crane, press, etc. Also got a PP2000, elm327, MPPS, galletto and scangauge for diags and mapping.
Services: Full mechanical services, will do modification work. Expert in shouting at broken HDi's, general diesel freak. Persistent bugger, love scrap yard visits.
Username: Rich306
Location: Portsmouth
Tools: I have a majority of Mechanics tools, Jack and Axle stands.
Services: I can help with mechanical bits and bobs, I've done most things from Cambelt changes to general replacement of parts.
Things i do charge for: Black Mask services
Username: puggyhdi
Location: Portsmouth
Tools: have access to most tools, including pp2000
Services: can service petrol and diesels, install ICE, can do most work on the engine and other front end work, can deal with most body work but crap at spraying also have access to G3 and a mop, and can make a nice cuppa.
Username: Jo3 - joe
Tools available: pretty much most stuff, slide hammers, ratchets, spanners, air guns, if needed and i ask my boss i can do 4 wheel alligniment and tracking for a fee, 3 ton jack and axle stands torx screwdrivers and few special tools that come in handy.
Works I can help with: well my job is a panel beater/strip fitter/ mechanic, so main job is fixing crashed cars, doing all aspects of suspension, i can strip a car down to a bare shell, and build it back up again, enines in and out, a lot is a bit specialised but i can do it, bleed brakes, and ive also lowerd my own car so i know how to do that.
Username: 4waydiablo
Tools available: most workshop tools
Works I can help with: fixing leaking boost pipes
Username: ginge191
Area: Portsmouth
Tools available: Garage with Most workshop tools, low entry trolley jack.
Works I can help with: 306 Dturbos and Early petrols.
Username: Matt
Location: Bournemouth
Tools: basic workshop tools, axel stands, jacks and access to ramps.
Services: audio installs, panel replacement, most interior stuff, replacement removal fitting, basic xu10 engine work, basic suspension work, removing struts, fitting front springs etc.
Yorkshire
Username: THE_Liam
Area: Leeds, West Yorkshire
Tools available: Basic workshop hand tools, jacks, ramps and stands, MIG welder, power tools, wide selection of large hammers.
Works I can help with: Most general car maintenance including servicing, belts, head gaskets, pump swaps, bushes and joints, beams, and I'm a pretty good welder.
*** I haven't got a lot of free time but I'm happy to help if I can ***
Username: Sam Barker
Area: West/North/South/East Yorkshire (on the boundary of all 4 lol!)
Tools available: Enough for most jobs, welder, engine stand, engine hoist, grinders etc Smallish garage
Works I can help with: Most general car related items, mainly xud stuff! But pretty handy with most things!
Username: Jenkosowls
Location: Rotherham South Yorks
Tools: Most basic tools needed to get by Most jobs major all small. Extensive detailing and valet equipment
Services: Suspension, engine, brakes, bodywork, servicing, gearboxes, clutches and problem solving. + Detailing work from a simple wash to paint corrections and interior valet from simple hoovering to steam cleaning and stain and odour removal and many more. Available most weekends and have a good parts supplier plus many scrap yards near me
https://www.facebook.com/PrestigeAutoCare.Detail
Username: Danny2009
Area: Rotherham
Tools Avaliable: Roll cab full of tools, grinders, welder, engine crane ect
Work I can help with: cambelts, headgaskets, suspension work, wiring, welding, pretty much anything really also have a dry lit workshop with tea making facilities
Ireland
Username: Harky
Area: Northern Ireland - Ballymena
Tools available: Usual basic workshop tools - just let me know in advance
Works I can HELP with: 306 Dturbos - Basic servicing and arsing about!
South West
Username: Foxy-jim (James)
Area: Somerset/ South-West
Tools available: Basic tools, jack, stands, spanners, Slide hammer.
Work I can help with: Rear beam lowering, fiddling about with things!
Username: darrenjlobb
Area: Cornwall
Tools available: Extensive workshop tools / air / pit etc....(also have PP2000 / flashing tools and diag for other models) and lots of injection pump tooling etc.
Works I can HELP with: Most things really, but particully things that burn oil and run positive manifold pressure!
Name: Devils_Fuel (Chris)
Area: Bristol
qualified mechanic and last worked in a garage for living 10 yrs ago, i look after all my cars myself (this is my first derv so still learning but have the basic knowledge) but i get Kris B to do the annoying jobs like timing belts now as he has the knack and is quick at it
I will do light stuff like services etc on my drive or yours but heavy dirty shite i won't do as dont have a ramp and am not going to struggle for a few golden beer tokens.
Username: Ruan
Area: Gloucester
Tools available: Halfords advanced tool kit.. and some jacks etc. I don't have much in the way of tools, but most of my wage goes on tools these days...
Works I can help with: Most general car stuff including servicing, Electronics, I can do various bits and bobs with pumps if I have to, just ask, I can always say no.. Same as Darren really, if it runs on heavy oil and doesn't suck, I can usually do something with it. I can just about bear petrols if I have to, so ask away.
North
Username: Hitchos
Location: Northumberland, North East
Tools: A Hammer lol
Services: Basically If anybody needs advice on what tyres to buy or what sizes fo fit, (im an ex tyre fitter btw), oh i can aso cook
Username: mark_airey
Location: South Lakes, Cumbria
Tools: Extensive collection of most things your likely to need including air tools
Services: Happy to HELP with anything, audio installation, replacing parts, installing new shiny things, making things fit that shouldn't etc, more useful with XUD engine related things than any other engine.
Username: Jonny81191
Area: South cumbria
Tools available: General workshop tools, pretty much all you need for basic car repairs and maintenance. Arc welder with a brazing tool.
Works I can HELP with: Most general servicing and maintenance, just ask me, I can always say no!
(I'm often quite busy but will try and help if needed
Username: MartinL
Location: Cheshire
Tools: Sockets, spanners, jack, axle stand, engine crane, can get my hands on almost anything.
Services: Fully qualified mechanic, 7 years stripping cars, 3 years in a garage.
Specialize in front end suspension, brakes, fiddly jobs
Wales
Username: Seb_Ryan
Location: South Wales
Tools: Lots, (sockets, jacks, welder )anything I dont have I can get.
Services: Anything mechanical. Can do 99.9 of things on most cars
, gimmie a shout