306oc - Peugeot 306 Owners Club & Forum

Full Version: Ideas
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Any ideas to add to my 306 would be appreciated
Turbocharger
5.7 hemi.
You could probably combine this thread into your wheels one.
Less stuff to clog up the forum :-)
2 super chargers and 2 turbos?

Would be a step up from the 1 blower and 2 turbos we've already had Tongue
(05-02-2013, 06:34 PM)Billyfr1 Wrote: [ -> ]Any ideas to add to my 306 would be appreciated

Add in what way? To make it faster, to make it prettyer, to put on the roof rack to make you look like a lady garden?

I think you could be a little more specific with your questions.

If you look through the project section there is alot of threads to give you some ideas.
6bt and a 4by conversion.
^^^ and the turbo off a Volvo FH12 or would that be copying?
Sweet rimz
Some of them pretty flower stickers?
C'mon lads don't scare him away just yet he's only 17 (down sammykins!).



Save up the dough and buy a better engine. If all else fails reverse it into halfrauds and but there special modified range Smile
If it's the one in your pic (the one with Justin Bieber wearing a onesie) then it need the rear doors removing and a respray. And an XUD.

/giveupandbuyadturbo
(05-02-2013, 07:41 PM)darrenjlobb Wrote: [ -> ]6bt and a 4by conversion.




....whats this?

Female..sorry
(05-02-2013, 08:30 PM)Mrs puglove Wrote: [ -> ]
(05-02-2013, 07:41 PM)darrenjlobb Wrote: [ -> ]6bt and a 4by conversion.




....whats this?

Female..sorry



It's basically porn.
doesnt help.lol
(05-02-2013, 08:34 PM)Mrs puglove Wrote: [ -> ]doesnt help.lol

engine porn
(05-02-2013, 08:29 PM)Pugmarshall Wrote: [ -> ]If it's the one in your pic (the one with Justin Bieber wearing a onesie) then it need the rear doors removing and a respray. And an XUD.

/giveupandbuyadturbo



lmao


Harsh but fair
I thought he was wearing a onesie didnt want to mention it though.
Match and jerry can?

On a more helpful note, check the project threads.
Its all down to personal choice! Make it your own Smile
(05-02-2013, 08:30 PM)Mrs puglove Wrote: [ -> ]
(05-02-2013, 07:41 PM)darrenjlobb Wrote: [ -> ]6bt and a 4by conversion.




....whats this?

Female..sorry

6bt is a cummins 6 cylinder diesel engine that is usually fuelled by a bosch pump
4by is usually a yanmar marine diesel engine, its a 4cylinder high pressure direct injection engine.

Both are turbocharged.
Faster - Strip it out, loose seats, door cards etc
Sound - Universal backbox, cone filter
Comfort - Sound deadening, meridan seats
Looks - Splitter, spoiler (oem please) , stickers if you're into that, lows, ph3 it

All standard stuff really and depends on your budget and what you want it for, low budget but comfort you want stuff like oem wheels with sound deadening - high budget no comfort is strip out interior and lows with banded steels
(05-02-2013, 11:53 PM)Dum-Dum Wrote: [ -> ]
(05-02-2013, 08:30 PM)Mrs puglove Wrote: [ -> ]
(05-02-2013, 07:41 PM)darrenjlobb Wrote: [ -> ]6bt and a 4by conversion.




....whats this?

Female..sorry

6bt is a cummins 6 cylinder diesel engine that is usually fuelled by a bosch pump
4by is usually a yanmar marine diesel engine, its a 4cylinder high pressure direct injection engine.

Both are turbocharged.

Thank you dum dum Smile repped for being helpful Smile
Find a tree and ghosty it into it for lols
(06-02-2013, 12:31 AM)lolsteve Wrote: [ -> ]Faster - Strip it out, loose seats, door cards etc
Sound - Universal backbox, cone filter
Comfort - Sound deadening, meridan seats
Looks - Splitter, spoiler (oem please) , stickers if you're into that, lows, ph3 it

All standard stuff really and depends on your budget and what you want it for, low budget but comfort you want stuff like oem wheels with sound deadening - high budget no comfort is strip out interior and lows with banded steels

Not bad suggestions really

In all seriousness, if you're young then there isn't much you can do without incurring a wrath of expense, possible unwanted plod attention and silly insurance.

I'd probably strip as much weight as humanly possible whilst keeping it looking and sounding oem.

Then fit a decent head unit and set of components, not bothering with a sub.

Then start saving for a faster 306!
Start off by lowering
Headlights
Alloys (standard? - cyclones, challengers?)
Ph3 bumpers and skirts (if not ph3)

Interior;
Sub and amp
Half leathers, meridian are preferred.
Decent HU
Elec rear windows?
Auto dim mirror
Spray/ wrap various interior parts

Turbo?
Remap?
Stick with standard air intake, it was designed like that for a reason.
Full service
Engine swap? - dturbo?
Straight through exhaust
Back box
Uprated suspension?

The world is your oyster
(06-02-2013, 06:53 AM)Mrs puglove Wrote: [ -> ]
(05-02-2013, 11:53 PM)Dum-Dum Wrote: [ -> ]
(05-02-2013, 08:30 PM)Mrs puglove Wrote: [ -> ]....whats this?

Female..sorry

6bt is a cummins 6 cylinder diesel engine that is usually fuelled by a bosch pump
4by is usually a yanmar marine diesel engine, its a 4cylinder high pressure direct injection engine.

Both are turbocharged.

Thank you dum dum Smile repped for being helpful Smile

4by meaning 4 wheel drive, Smile not a yanmar diesel engine heh, Nothings beats a bt with twins at 1200hp and autotrans!
Next project darren? lmao