The error code hungry hdi - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: The error code hungry hdi (/showthread.php?tid=6039) Pages:
1
2
|
The error code hungry hdi - lolsteve - 07-09-2012 Hello all, Had a project thread over on .net but never really updated it since progress was pretty darn slow up to late this summer when finally got my ass in gear and harrased poodle enough to help me out She be a china hdi dturbo, with clocks that say 139k miles..however due to a broken speedo sensor when I bought it I'm feeling it's more in the region of 145k Current mods: Stage 1 White lasers Sub+uprated speakers Decat + powerflow backbox And my oem intercooler. What it's from is a secret will say this though, only cost £20 Plans: Stage 2 limited torque, trying to find some budget friendly uprated clutch Fix the "whistle" that has appeared, video below Find some different oem alloys, not clones RE: The error code hungry hdi - Poodle - 07-09-2012 Hahaha finally got a thread up! Power still feel better than before? RE: The error code hungry hdi - karl1989 - 08-09-2012 have you got a blanking plate on the egr?. arron had the same problem. did you clean the elbow and put a new gasket on?. RE: The error code hungry hdi - lolsteve - 08-09-2012 (08-09-2012, 01:54 PM)karl1989 Wrote: have you got a blanking plate on the egr?. arron had the same problem. did you clean the elbow and put a new gasket on?. I've put a new gasket on the main intake part it's a only a paper one though, just took the elbow off and found what looks like fresh tar/oil stuff on the egr gasket. thinking I might have had it on wrong way round? Edit: I hate the egr gasket section, such a bitch of a job trying to put back together and when I do get it on the screws don't seem to want to line up Edit 2: ordered blanking plate, since I'm thinking the egr gasket is a bit bent RE: The error code hungry hdi - Poodle - 11-09-2012 Just bang a cardboard gasket in there for now bud, should sort it out. Cereal box ftw! RE: The error code hungry hdi - lolsteve - 11-09-2012 Way ahead of you, fixed the whistling problem. And now got a nice metal blanking plate for when the the cardboard gasket/blanking plate fails since I don't fancy messing with those egr bolts again any time soon RE: The error code hungry hdi - Arron - 12-09-2012 Good meeting you the other night pal! I Like the white lasers. Are you still considering re routing the drivers side on the cooler? RE: The error code hungry hdi - Poodle - 13-09-2012 Ah good stuff haha. Did you make up some brackets for that intercooler, or is it still on dodgy cable ties..? RE: The error code hungry hdi - lolsteve - 13-09-2012 (12-09-2012, 06:00 PM)Arron Wrote: Good meeting you the other night pal! I Like the white lasers. Are you still considering re routing the drivers side on the cooler? Was good meeting you too, did you get my number of Karl? Cheers but they need a refurb will do it if the weather gets any better round here. I've pushed the cooler up on that side a bit since I noticed it was leaning and the pipes are not as low down as they were , went over some speedbumps yesterday without thinking about the pipes and didnt hear any rubbing so thinking the routing can stay as it is..for now at least (13-09-2012, 04:04 AM)Poodle Wrote: Ah good stuff haha. Did you make up some brackets for that intercooler, or is it still on dodgy cable ties..? I can neither confirm nor deny the use of cable ties lol I am keeping an eye out for brackets though to the point were housemates have noticed me eyeing up most of the metal in the house RE: The error code hungry hdi - Arron - 13-09-2012 Hardware shop and a grinder for brackets mate!!! RE: The error code hungry hdi - Poodle - 13-09-2012 (13-09-2012, 09:10 AM)lolsteve Wrote: ...housemates have noticed me eyeing up most of the metal in the house... Hahaha winner, I fully expect to see your FMIC mounted on a couple of taps and a letter box when you come back for christmas. RE: The error code hungry hdi - lolsteve - 04-10-2012 Bit of an update, Spilt about 15L biodiesel in the boot area back in april(?) and in recent weeks started noticing a seepage in the pasenger footwell , so got stripping the interior out and found this Yummy Tried cleaning it out but all I gained from that was a slippy backgarden and dirty finger nails, so resorted to this Replaced foam with wool style, it's only a temp fix til I can be asked to invest in foam. All back together now however the seats sliding mechanism seems a little off My interior fans have been playing with me for some time now decided they want to work when going round a roundabout or not working when the car is majorly steamed, up the cause being... Yay for burning, not sure how to fix apart from getting rid of the pug plug and getting a new one RE: The error code hungry hdi - Arron - 04-10-2012 Haha like what you did there.. looks like its arc'd. When you put a new connector on check its the right amp fuse in for it RE: The error code hungry hdi - Niall - 04-10-2012 Go to peugeot with the plug and they can sell you a replacement. normally less than a quid RE: The error code hungry hdi - Poodle - 05-10-2012 Lol. When you planning on getting a clutch sorted, eh? RE: The error code hungry hdi - lolsteve - 05-10-2012 To the pugeot parts desk I go! I'll get a clutch after I kill my current whateveritisinthere with a stage 2..which I have yet to buy..Eurgh money.. on the plus side found a garage that could do the change for me. RE: The error code hungry hdi - lolsteve - 18-02-2013 Update time: Last night/This morning won a set of nimrods for £19, waiting for the guy to reply to me about courier though I'm getting the impression he won't reply...Cheap wheels go Waiting for a reply about some coilovers so can start this while lowering process Got a knocking sound from the rear when breaking, thinking it's bust shocks so looking for replacements when it comes to lowering time Clicky Plans are to get stage 2 in time for pugfest/fcs , so keeping eyes out for clutch systems/insurance Also need to do a cambelt/waterpump change soon I think but cringeing at garage prices to get it done RE: The error code hungry hdi - C2K - 18-02-2013 Saw your ebay link for the bargainous alloys. Suggest you get a local bod to collect and get it couriered from them. Failing that, drive from Bradford for a tank of derv! RE: The error code hungry hdi - Poodle - 18-02-2013 Check your beam mounts before shelling out for shocks, could be a cheaper fix. I'd say it's worth the extra money for bilsteins if you are getting suspension replaced, you still thinking about taking this on track more often? RE: The error code hungry hdi - Arron - 18-02-2013 What poodle said. I had exactly same issue and it was rear beam... and whilst your up here if you want any work doing fairly reasonable/cheap let me know and I'll get you some quotes RE: The error code hungry hdi - lolsteve - 18-02-2013 Got a reply from the alloy dude, he's not keen on me organizing a courier service said pick up only. Might have to road trip it Best way to check mounts? I am wanting to take it out on pugfest and fcs this year since I fear I'll have to have something more sensible after uni for work Thanks Arron, think the cambelt is priority at the moment since don't want it snapping like the girlfriends saxo if you could get a quote for a change I'd be grateful RE: The error code hungry hdi - Poodle - 18-02-2013 Get under there with a torch you fucknugget, you know what knackered bushes look like haha. :p RE: The error code hungry hdi - Arron - 18-02-2013 Ideally a crowbar up on a ramp... Let me know when your free steve I'll have a listen RE: The error code hungry hdi - lolsteve - 18-02-2013 ha fair enough, next free day I get I'll jack her up and start taking a look though the shocks will need changing anyway if im planning a ~60mm drop won't they? I'll let you know when it's happening arron, get some bacon, some tea going maybe even turn it into a mini meet of sorts RE: The error code hungry hdi - lolsteve - 22-02-2013 Nimrods have arrived, £58 including the postage. Deal of the wheel Will need some spacers or something now to get them to fit And currently respraying badges to get them in better condition for show seasons/general car pride RE: The error code hungry hdi - Poodle - 22-02-2013 Managed to get them sorted in the end then, the guy agree to have them collected or what? Are they the 206 ones...? I'm sure there's some spacers up at a decent price in the parts section atm... Should look sick on these man, you sorted out the lowering yet? RE: The error code hungry hdi - lolsteve - 22-02-2013 Yea offered him a little extra to encourage him to wrap them up, arrived with the value bin bags he wrapped them in holding on for dear life. They got the removable center cap and they weigh a bit as well so im guessing it's the 206 ones I'll take a look for the spacers, thinking im needing ~20mm? will the lasers bolts be enough to hold them on or will i need another set? Gona spray them up white cause poundland spray paints I might have got the lowering partly sorted, got a set of coilovers im in talks over problem is the adjuster is seized and a guy at uni has a impact hammer thing that I could borrow RE: The error code hungry hdi - Arron - 23-02-2013 You'll need extended bolts dude. I'd say 15 mil spaces would be fine but 20 will look good, may have to roll your arches a lil tho. RE: The error code hungry hdi - Poodle - 24-02-2013 Go for 20mm mate, may well be able to borrow an arch roller to sort that out, and yeah extended bolts are very necessary. Speed shack did well for me, just be sure you know exactly what you're asking for. RE: The error code hungry hdi - lolsteve - 27-02-2013 Tested fitted one nimrod today on the rear, went on the hub fine and span around with only slight rubbage maybe 20mm isnt needed after all? tyres are 195/45 i think Checked beam mounts today and all appear okay or at least not needing to be replaced just yet since the beams doesnt move around Pretty sure I got warped disks now, turning the disk today showed areas of resistance and then ease got a video I'll put up later |