Black ph 1 XUD BUS - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Black ph 1 XUD BUS (/showthread.php?tid=35824) Pages:
1
2
|
Black ph 1 XUD BUS - daniel909 - 13-04-2017 Hello all Well I finally managed to get my hand on a black phase 1 xud : I did a straight swap for my cherry hdi which was coming up for mot and needed a few bits doing so thought f*ck it and did the swap : Current state Running lucas boosting at 24psi and smoking hellis Slammed all round front end on lowering springs On steels Six interior And mot till feb 2018 Plans try to keep it clean and make it cleaner Drop a bosch on and stop the smoke a bit Maybe white banded steels Raise the ass end and coilovers up front I am also after a interior light and sunroof switch as the whole lot is missing Also ph1 front fog lights Thanks RE: Black ph 1 XUD BUS - Mattcheese31 - 13-04-2017 nice car mate, i have and interior light and sunroof switch, if you still need them drop me a message RE: Black ph 1 XUD BUS - Ash - 13-04-2017 Was smoking fair bit last night so no. plate works. puff! RE: Black ph 1 XUD BUS - Eeyore - 13-04-2017 oh man. black phase 1s are the bomb! Espcieally when they are on fondmetal 4000s RE: Black ph 1 XUD BUS - Matt-Rallye - 13-04-2017 Ah black ph1 dturbo sure thats what started my love of 306's many years ago RE: Black ph 1 XUD BUS - Orta - 13-04-2017 Very very nice. Although it needs skirts! I always fancied 205 speedlines on a phase 1 myself. Last picture looks like it's on lasers, or is that just my eyes :-? RE: Black ph 1 XUD BUS - Frosty - 13-04-2017 Getton Rhys, good to see you got your hands on this, they will be pretty hard to come by soon i reckon. Can't believe there no mention of turbo in the plans though lol. I may also have the interior light and sunroof switch somewhere if needed. RE: Black ph 1 XUD BUS - mr_fish - 13-04-2017 What a wagon....need to keep an eye on that temp gauge now...she's no DI. RE: Black ph 1 XUD BUS - daniel909 - 14-04-2017 (13-04-2017, 09:51 AM)Ash Wrote: Was smoking fair bit last night so no. plate works. puff! Yep she smoke like shit haha (13-04-2017, 10:16 AM)Eeyore Wrote: oh man. black phase 1s are the bomb! Espcieally when they are on fondmetal 4000s Yeah they look alright any wheels with dish look good (13-04-2017, 12:52 PM)Orta Wrote: Very very nice. Although it needs skirts! I always fancied 205 speedlines on a phase 1 myself. Last picture looks like it's on lasers, or is that just my eyes :-? Yeah im after a set of skirts Yeah that picture with the lasers is from the old owner (13-04-2017, 01:01 PM)Frosty Wrote: Getton Rhys, good to see you got your hands on this, they will be pretty hard to come by soon i reckon. Can't believe there no mention of turbo in the plans though lol. yeah it not often you see black dt around these days. if you have the whole unit would be ideal could grab it off you on way to pug fest cheers (13-04-2017, 02:06 PM)mr_fish Wrote: What a wagon....need to keep an eye on that temp gauge now...she's no DI. My eye are fixed on the temp gauge ahaha RE: Black ph 1 XUD BUS - daniel909 - 14-04-2017 Well new tyres today and dropped on some cyclones RE: Black ph 1 XUD BUS - darrenjlobb - 14-04-2017 Every picture you put on this forum is taken at my place [FACE WITH TEARS OF JOY] Sent from my Nexus 5X using Tapatalk RE: Black ph 1 XUD BUS - daniel909 - 15-04-2017 (14-04-2017, 10:11 PM)darrenjlobb Wrote: Every picture you put on this forum is taken at my place [FACE WITH TEARS OF JOY] That because my cars are being fixed most if the time haha Black ph 1 XUD BUS - Jake - 16-04-2017 (13-04-2017, 10:16 AM)Eeyore Wrote: oh man. black phase 1s are the bomb! Espcieally when they are on fondmetal 4000s Man I miss this car so much Sent from my iPhone using Tapatalk RE: Black ph 1 XUD BUS - daniel909 - 23-04-2017 Well things arnt going so good with the dt Alternator f*cked up brought a new one Re built a bosch fitted that have a few minor problems Now the blower has shit it self only had the car 2 weeks RE: Black ph 1 XUD BUS - Frosty - 23-04-2017 Sounds like you've not had much luck mate RE: Black ph 1 XUD BUS - daniel909 - 23-04-2017 Tbh I blame darren for the turbo You ask tom horton what he like on test drives RE: Black ph 1 XUD BUS - darrenjlobb - 23-04-2017 What use is a test drive if that car isnt wide open! RE: Black ph 1 XUD BUS - Frosty - 23-04-2017 Haha i think Darren has a good point there to be honest Rhys RE: Black ph 1 XUD BUS - daniel909 - 23-04-2017 Meh shit happens can't beat driving the carstar round daily RE: Black ph 1 XUD BUS - daniel909 - 26-04-2017 Well I have now change the blower to a k14 yes I no a k14 all we had around at time but means the car is drivable again After seeing some of the work done on this car is making me wanna pull the engine and rebuild so that could come in the near future. Also I never new to space the studs on the exhaust manifold peugeot used 3 m16 nuts and a big washer Current state of the workshop Also please excuse the big nut sack on the back window :/ RE: Black ph 1 XUD BUS - allye - 26-04-2017 You need to sell me the valances off the 205 outside! RE: Black ph 1 XUD BUS - daniel909 - 08-06-2017 Well update time and may have killed a few more blowers hmmm So the k14 shit it self after a week so got pissed off and decided to pull the motor . Donner engine has come oujt of my 205 project as I could not afford to insure the 205 so I pulled the plug on that Bye bye 205 RE: Black ph 1 XUD BUS - daniel909 - 08-06-2017 Dropped the engine in and fitted a 2056v and decided to race darren up the highlanes yep you guessed it I shit that blower to Soo we got to work fitting a 2256v I had laying round and we ended up box mounting it seems to be sweet atm so currently spec list. 2.0 16v rods victor reinz mls head gasket Arp head studs Darren lobb bosch pump Red power flex lower mount Front mount Paddle clutch Box mounted 2256v S2000 fliter Oil cooler New nissans rad Right best dodge of the year here had to drill a boost pipe for another project no longer need the hole in the pipe so I got a bolt and two lamb castration rings works bleddy well tbh Black ph 1 XUD BUS - bashbarnard - 08-06-2017 How do you keep blowong turbos?!! Sent from my iPhone using Tapatalk RE: Black ph 1 XUD BUS - Mattcheese31 - 08-06-2017 (08-06-2017, 07:56 PM)bashbarnard Wrote: How do you keep blowong turbos?!! how does anyone? . . . RE: Black ph 1 XUD BUS - Anton - 08-06-2017 Lobb pump RE: Black ph 1 XUD BUS - daniel909 - 08-06-2017 (08-06-2017, 09:10 PM)Anton Wrote: Lobb pump Had to be said RE: Black ph 1 XUD BUS - mr_fish - 09-06-2017 (08-06-2017, 09:41 PM)daniel909 Wrote:(08-06-2017, 09:10 PM)Anton Wrote: Lobb pump that and living by: "just one more psi will be alright" RE: Black ph 1 XUD BUS - Eeyore - 09-06-2017 Great progress! Youre a lot younger in those pictures than we expected! RE: Black ph 1 XUD BUS - darrenjlobb - 09-06-2017 (08-06-2017, 09:41 PM)daniel909 Wrote:(08-06-2017, 09:10 PM)Anton Wrote: Lobb pump Lol bledy boys..... Think you will find what actually happened was.....Someone was informed whatever you do, do not use WOT or you WILL pop the turbo....As no control setup yet....My turbo we should add ; However someone could not resist the use of WOT while following me back to my place to fit said turbo control! Haha, Rhys is only a youngun anyway |